MiSTer FPGA Forum

azesmbog

breiztiger wrote: ↑Sat Jan 06, 2024 10:13 am
with the dsk and core i provided it work

Do all three variants in my archive work?

azesmbog

Only CRTC 0 !!! Where do I put it or set it? I'm not a real welder and Amstrad enthusiast, I'm more specialised in Spectrum ) Alas, I failed to start again even with your file and your firmware. I attach an archive with the files I have. Only revolog0-sin_proteccion works on RVM upd: CRTC 0 - I found where to toggle it, but I still can't get anythi...

azesmbog

Judging by the fact that it doesn't work in RVM either, that's it. But I can post the 3 variants I have somewhere.

azesmbog

What about the REVOLUTION demo ? This demo exists in three variants, just one, rumoured PC emulator can run all three variants. But I only checked on RVM - one variant, the simplest one, runs. On MiSTer core - none of the variants works. About Z80 from NukeMD - it may be a good core, but it will definitely not fit all cores without exception. But i...

azesmbog

Well, another year has passed!)
I hope for the past year was a lot of fixes in the existing cores, as well as new ones added and new people and developers came)
All in all just good news and happy Holidays! Hooray!

azesmbog

A little off topic, but still I’ll ask, but have you tried to run such a BIOS?))
https://github.com/640-KB/GLaBIOS

azesmbog

Sorgelig wrote: ↑Tue Apr 27, 2021 1:44 pm ZX Spectrum:
- Fix snow effect (snow test passed).

If it doesn't make it difficult - is it possible to include the "snow effect" on the ZX128 model as well?
It turns out he is there too. Thank you.

upd 19.10.22
request cancel.
Already checked everything myself.

azesmbog

F11 - enter +D snapshot menu (or ROM0 menu if IMG/MGT not mounted) or DivMMC file browser.
Highly recommended browser by Bob Fossil

azesmbog

caffeinekid wrote: ↑Sun Jul 17, 2022 9:29 pm Is it a Speccy clone? Or more than that?

It's a little more than a Speccy clone. Better than the ZX Next one in some way

http://prods.tslabs.info/

azesmbog

Newsdee wrote: ↑Tue Jul 12, 2022 2:03 am I was able to run everything without any hassle (other than the first HDD setup), and sorted the whole lot into genres.

Would you be kind enough to post your HDD image somewhere??
I would especially like to play the very first version of Digger

Thank you.

azesmbog

Although the first official mention of our beloved MiSTer happened on the www.atari-forum.com forum on June 21, 2017, https://www.atari-forum.com/viewtopic.php?t=31825 but the birth of the project can be considered the end of May - the beginning of June :) Sorgelig in private conversations at the end of May told about his new development, that the ...

azesmbog

, yes, I wouldn’t refuse the compiled file either, obviously at least somehow working

For I compiled it, it’s not difficult, it’s only long (1 hour 13 minutes

, but it either compiled incorrectly, or I can’t find the right BIOS . And so I can share the file.

azesmbog

: 1652077820.1049426045.mapper.jpg (154.07 KiB) Viewed 9151 times

azesmbog

Mapper 3914 ?
https://github.com/ClusterM/nes-warface ... ceMapper.v
https://github.com/ClusterM/nes-warface/releases
I understand that it is in the singular, and there are many others unrealized, but what if?

azesmbog

I'm able to get the computer to boot from the secondary SD card and I'm able to issue the commands B RK0 or DX0 or MY0 and list the directories. At this point, I'm not sure what else to do. The computer is certainly not for games, but there are also more than a dozen games on it. In addition to Tetris, the MY disk should contain DIGGER - a game no...

azesmbog

Understood.
Works.
Thank you !!!

azesmbog

Here you go. No, the first attempt is unsuccessful. I tried it in two emulators and on my devboard. On the devboard, it seems like the code block is loaded, the stripes go along the border, but when the download is complete, nothing happens. Waiting for loading further. Maybe you need a simple one-line BASIC bootloader for the code block? randomiz...

azesmbog

pgimeno wrote: ↑Sun May 23, 2021 12:52 pm If I can get the dsk. sure, I can try.

saa1099test.zip: (218.8 KiB) Downloaded 249 times

everything is very simple there
the bit file is loaded from address 32768 and started from there.
Made in Spectrum mode - I haven't learned anything else

azesmbog

pgimeno wrote: ↑Sun May 23, 2021 12:43 pm What is tld_sam.bit?

This is a bitstream for another devboard, just for which the tap-file was made.
By the way, can you help me make a tap-file from my binary file on the .dsk disk? I would be useful for checking

SAMCoupe_3.zip: (1.02 MiB) Downloaded 242 times

azesmbog

https://drive.google.com/drive/folders/ ... sp=sharing
at the same address second attempt
upd
a few minutes and there will be a third.
updated
third attempt in the same place

azesmbog

The original Sam Coupe project was written by mcleod_ideafix, but no disk drives.
Sorgelig has already added disk devices to the project.
I think if you provide disks for testing - he will take time to deal with the wrong work

azesmbog

ZigZag wrote: ↑Sun May 23, 2021 7:52 am if you play golf in a thunderstorm you're *probably* going to be ok, but it's sensible just to play it safe .

No matter how ridiculous it may sound, my MiSTer died during a thunderstorm

Together with him, a lot of things still died, but he is the most pity of all

)

azesmbog

Okay, this is my first time modifying a Verilog file, so I may have done something wrong, but here we go. Whaaaah !! Woooooow !!! I am impressed!! I can't do that :))) I can change it a little bit, compile it every time and see what happens. Sequential Approximation Method. I think with such skills you should definitely install Quartus for yoursel...

azesmbog

Here's a TAP that I think will work. Excellent!! This version is downloaded from SimCoupe. But it doesn't load on my board yet, while I'm dealing with the line-in. And a passing question - is the tap version not too difficult to do ?? otherwise I wrote one utility a long time ago, in the .dsk version it works fine, but I would like to try the tap ...

azesmbog

Not. It does not work in SimCoupe. I am attaching several files. I have not tested all of them, but they should work under SamKoupe. Inside any tap, only data files https://drive.google.com/file/d/1UFYUHVluhtfEJQIAkPRPfw5-Bgy3u5WB/view?usp=sharing rbf file will not make it difficult for me to compile, only I need to accurately and clearly understan...

azesmbog

In fact, the keyboard mapper is very simple, you can figure it out and arrange the necessary keys as you like :) https://github.com/MiSTer-devel/SAM-Coupe_MiSTer/blob/master/rtl/keyboard.sv You need desire and a clear understanding of the goal. Everything. I have a dozen tap files. I do not know in what program they were made, but in SimCoupe they ...

azesmbog

I would much prefer a direct positional key mapping: using this image as a reference, map the keys to the actual keyboard depending on the positions of the keys. Two questions: 1. Can you make a program "kmatrix" in the form of a tap-file for loading from a tape recorder? 2. The layout of the keyboard in SimCoupe is quite satisfactory, c...

azesmbog

btw, zx48 core hangs after tests 34-37. Алексей! :) Твое ядро лучшее, хотя у меня и не работает :) Ну портировал человек свое ядро на МиСТер, ну хорошо же :) Зависает после 34-37 - это из-за портов DivMMC - если их отключАть- все проходит до конца. чтобы на IN/OUT не фейлилось - можно Кемпстон отключить) Это на нем чаще всего. на этом ядре снег ра...

azesmbog

This is a core for perfectionists, it has very accurate timings for contended memory, unattainable in a regular core, it can be seen only in special tests. The same kernel exists for zx128 as well

azesmbog

pgimeno wrote: ↑Sun Dec 13, 2020 8:45 pm Also, am I the only one having this problem? I am using the 20201108 core.

I checked the old versions from the last year - there the period and comma are normal.
Checked the latest version - yes, messed up.
Well, wait until they officially fix it.
I can compile, of course, if necessary.

MiSTer FPGA Forum

Search found 32 matches

Re: Amstrad Core

Re: Amstrad Core

Re: Amstrad Core

Re: Amstrad Core

Re: MiSTer is 6 Years Old!! Happy Birthday !!!

Re: IBM PCjr BIOS in PCXT Core

Fix Snow Effect

Re: DivMMC tutorial needed

Re: TSConf vhd image not working

Re: MiSTer PCXT

MiSTer is 6 Years Old!! Happy Birthday !!!

Re: Sega Saturn Core in Development

Re: Mapper Requests

Re: Mapper Requests

Re: DVK MC1201 (PDP-11 compatible Soviet computer)

Re: SAM Coupé

Re: SAM Coupé

Re: SAM Coupé

Re: SAM Coupé

Re: SAM Coupé

Re: SAM Coupé

Re: I think my DE10 is fried

Re: SAM Coupé

Re: SAM Coupé

Re: SAM Coupé

Re: SAM Coupé

Re: SAM Coupé

Re: ZX 48 Core

Re: ZX 48 Core

Re: Dot and Comma Swapped