MiSTer FPGA Forum

Bernouilli

I would love to have a core for the EPSON QX-10.
It's a great computer from the 80´ that runs CP/M.

I love the display with a nice font.

Bernouilli

I got mine a 100 euro less, but that was 5-6 years ago. 352 in stock now.

Bernouilli

Yes I know, but why wouldn't put the orginal sid files, this wouldn't take much place. About 15MB at most.

Bernouilli

The collection is great. But it's too bad that the files provided doesn't contain sid files.

Bernouilli

I would say that the minimum of button needed is one. With one button, you can play most of the games on most of the cores.
With zero buttons, you can't play.

Bernouilli

https://a.aliexpress.com/_EucHb3J

https://a.aliexpress.com/_EzAq1zL

Bernouilli

Great. Thanks.

Bernouilli

Thanks a lot. That was the problem, I had vsync_adjust=1. I did what you suggested and set the refresh rate to 60 in the core and then put back vsync_adjust to 1.
Now it works fine at 60 hz.

Bernouilli

Did anyone manage to get irem M72 work to work on HDMI using the scaler? All I get is 2 or 3 bright lines on the screen but the game starts, I can hear the sound. I tried different games such as r-type and r-type II and got the same the result. The osd isn't available once the core is launched, or at least it doesn't show because of the display pro...

Bernouilli

It would be nice if we had the choice to choose which updates we want. This could be done by a flag in the settings before the updater runs. And if it is set, the downloaded would display all the new files about to be updated/installed and we could choose the files we don't want to be updated.

Bernouilli

I don't think it's inappropriate, what is inappropriate is the title.
The title makes you think that there is a new core for the mister.
The title should be something like : new core to port to the mister : AIM65
And maybe it should be in the "Development for the Mister" sub-forum.

Bernouilli

I managed to solve the problem by mapping an unused key (calculator key) to the RightAlt key.
Now I know about key ghosting and key jamming.

Bernouilli

I replaced my keyboard with another one and now, the combo LeftShit-LeftCrtl-LeftAlt-RightAlt doesn't work anymore. The shortcut LeftCrtl-LeftAlt-RightAlt doesn't work either. I tested the old keyboard and the new keyboard with showkey and I see that whith the new keyboard, the key(100).pressed is not triggered when I press the right alt key. I jus...

Bernouilli

I agree with all that have been written in this post. Pvm are great but only if you find a flawless device and at a decent price. I got my 14" pvm for about 80€. I think it's far better to find some 21" Sony trinitron like the kv21fxXX models. You can find those at less than 20€ and sometimes even for free. And the image quality is almost...

Bernouilli

On ao486, you get the mister menu by pressing win-f12. F12 is treated as f12 by the ao486 core.

Bernouilli

Thanks for your explanation. That's was I was suspecting. When I see lots of *, that means there is trouble downloading data. I will first try with Ethernet and see if it's better. I also checked a tmpxxxxx file in /tmp that contains more information about the downloading and I saw several times a problem with bad hash between the file downloaded a...

Bernouilli

I was using wifi. There is also tildes sometimes, instead of dots.

Bernouilli

When I launch update_all script, it sometimes takes ages to download files, for some files, it starts displaying dots and stars and then it takes a long time to go to next file. I don't think it's actually doing something when it displays dots and stars. For instance today, I launched update_all and selected only wall papers. It started by telling ...

Bernouilli

I think that you can switch from one mister uni to another using the buttons from the io board.
Try this : press osd to get the osd and then press both the reset button and the user button.

Bernouilli

Thanks

Bernouilli

I bought this cable a few years ago and the quality was good :
https://www.ebay.fr/itm/250925966106

Bernouilli

Yes. Please.

Bernouilli

No, I didn't succeed. In fact I made a mistake in my previous message, I ordered a glass for an iPad Air 4, and there is no hole in the glass. However I didn't manage to cut the glass, I used a glass cutter like this : https://i5.walmartimages.com/asr/c1e066a6-5336-456a-86fa-0a24becc43f2_1.88038039d4bd6c5d6ae2d321564b7d67.jpeg But the glass is too ...

Bernouilli

Lisa was not the predecessor of the Macintosh.
The Lisa project and the Macintosh projet were two separate projets. They have nothing in common. The Lisa project was already going on when the Macintosh project started. But that's all.

Bernouilli

The amiga core is called minimig. The second sdcard isn't necessary, it can be used by some core but I don't know which. You can remove the sdcard using a toothpick and push it slightly, it will get out. But there is no need to take it off. You can upload al the roms using the network. Look in the script lists to see if you have a script call "...

Bernouilli

I bought a version with vga/hdmi from here : https://www.aliexpress.com/item/1005001689746001.html The driver board was V.M56VDA and the display woudn't diplay a 50Hz signal, neither in vga nor in hdmi. I tried to flash the board (using a rpi4) with some of the firmware posted in this thread but with no luck. I managed to flash back the same firmwa...

Bernouilli

My board didn't come with a jumper either. But there was a 0 Ohm resistor soldered on the bottom of the pcb.
I removed it and put a jumper, I now can switch between 3.3v and 5v for the fan

Bernouilli

Last month I almost broke my mister. I connected a 12 V psu instead of the 5V psu. I had both in the same place and didn't notice I took the wrong one. When I plugged the power cord, the mister started and stopped after a split second. I removed the power and connected it again and same behaviour. Only then I noticed that I had used the wrong psu. ...

Bernouilli

I finally managed to pair my ps3 controller with the mister. You don't have to invoke the pairing procedure (F11). All you have to do is : Connect the ps3 controller with a cable, it should then be recognized and working, one led is on. Display the system menu on the mister (F12) Disconnect the cable from the controller, the leds should start blink...

Bernouilli

I agree with the fact that it is not necessary. If you put aside the fact that you have to implement it, debug it and maintain it. I don't think that the extra KB you save using 7z instead of zip is worth the extra time it would take to run a rom inside a 7z instead of a zip file. Some people even prefer not using zip at all just because of the ext...

MiSTer FPGA Forum

Search found 31 matches

Re: Wishlist of Cores You Would Like to See in the Future

Re: Mouser.de Has DE10-Nano Boards in Stock (08/11/23)

Re: Ultimate SID Collection (As Background Music)

Re: Ultimate SID Collection (As Background Music)

Re: What Is the Minimum Number of Buttons Needed for Most Arcade Cores?

Re: 9.7” iPad Screen Board Firmware Discussion

Re: C64 Fresh from the boat: New Demo

Re: Irem M72 Core on HDMI

Irem M72 Core on HDMI

Re: How to Monitor update_all Changes?

Re: New computer core to be ported on DE10 : Rockwell AIM65

Re: Reset shortcut not working

Reset shortcut not working

Re: Advice about PVMs

Re: Keyboard not working on most cores

Re: Update_all script

Re: Update_all script

Update_all script

Re: Is it possible to switch MiSTer.ini and MiSTer_alt.ini with "Reset / OSD / User" buttons?

Re: 9.7” iPad Screen Board Firmware Discussion

Re: Quality C64 video cables?

Re: 9.7” iPad Screen Board Firmware Discussion

Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄

Re: Seems like the Apple Lisa OS Sourcecode has been released

Re: Just Starting Out With MiSTer Some Basic Questions?

Re: 9.7" iPad Retina Screen Perfect for MiSTer, $60 Fully Assembled 😄

Re: Subsitute for 5v Jumper?

Re: MiSTer Doesn't Power Up

Re: How to Pair PS3 Controller

Re: All ROM Sets Are in 7zip Format, Why?