Search found 22 matches

by aToyRobot
Tue Aug 18, 2020 9:11 am
Forum: Neo Geo MVS / AES / CD
Topic: "Not Enough Memory" Even Though I Have 128MB
Replies: 21
Views: 16734

Re: "Not Enough Memory" Even Though I Have 128MB

You don't have to use a script to set the bootcore. I set my bootcore by editing the ini file on the SD card.

I'm just trying to help to prevent people from falling into this trap in the future that's all
by aToyRobot
Tue Aug 11, 2020 9:35 am
Forum: Neo Geo MVS / AES / CD
Topic: "Not Enough Memory" Even Though I Have 128MB
Replies: 21
Views: 16734

Re: "Not Enough Memory" Even Though I Have 128MB

Hi Sorgelig I'm not sure I understand, because this sounds like an issue to me. On github you said "It's misusing the MiSTer" but all I have done is used a documented feature (bootcore) and it has broken another part of the system without warning. At very least I feel like the documentation on MiSTer.ini should be updated to warn the user...
by aToyRobot
Mon Aug 10, 2020 6:52 pm
Forum: Neo Geo MVS / AES / CD
Topic: "Not Enough Memory" Even Though I Have 128MB
Replies: 21
Views: 16734

Re: "Not Enough Memory" Even Though I Have 128MB

I had the same problem aToyRobot. It started when I changed the bootcore in the .ini file of my MiSTer to something else than the Menu core. My setup was booting the SNES core, then when I changed the core to NeoGeo there was this message on every game and there was corrupted graphics. I just commented the bootcore option and it works now. Seems l...
by aToyRobot
Mon Aug 10, 2020 10:39 am
Forum: Neo Geo MVS / AES / CD
Topic: "Not Enough Memory" Even Though I Have 128MB
Replies: 21
Views: 16734

Re: "Not Enough Memory" Even Though I Have 128MB

I had the same problem aToyRobot. It started when I changed the bootcore in the .ini file of my MiSTer to something else than the Menu core. My setup was booting the SNES core, then when I changed the core to NeoGeo there was this message on every game and there was corrupted graphics. I just commented the bootcore option and it works now. Seems l...
by aToyRobot
Sat Aug 01, 2020 1:24 pm
Forum: Amiga (Minimig)
Topic: Audio input / sampler
Replies: 7
Views: 5087

Re: Audio input / sampler

Thanks for everybody's replies/suggestions. Converting samples and using the shared directory is certainly a workable solution. I guess what I was hoping for was a more authentic experience, along with a more accurate sound. E.g. I would expect a converted file to sound different, albeit subtly, than one sampled at the low sample rate and using rea...
by aToyRobot
Mon Jul 27, 2020 7:01 pm
Forum: Amiga (Minimig)
Topic: Audio input / sampler
Replies: 7
Views: 5087

Audio input / sampler

Is it at all possible to use the audio input for the Amiga, or is there some other way to connect a sampler? It would be great fun to have a way to sample into Protracker et al.
by aToyRobot
Mon Jul 27, 2020 6:03 pm
Forum: Neo Geo MVS / AES / CD
Topic: "Not Enough Memory" Even Though I Have 128MB
Replies: 21
Views: 16734

Re: "Not Enough Memory" Even Though I Have 128MB

Thanks Gymcrash, I'll try all of those things soon
by aToyRobot
Sun Jul 26, 2020 8:22 pm
Forum: Neo Geo MVS / AES / CD
Topic: "Not Enough Memory" Even Though I Have 128MB
Replies: 21
Views: 16734

Re: "Not Enough Memory" Even Though I Have 128MB

Just wanted to leave an update so that this doesn't become one of those unhelpful threads that I happen across online regularly. in short - this is still not working for me. I have tried: I known working .neo file for Garou A complete "reinstall" of the core using the update script (I had previously set up the core manually) I'm starting ...
by aToyRobot
Mon Jul 20, 2020 7:15 pm
Forum: Neo Geo MVS / AES / CD
Topic: "Not Enough Memory" Even Though I Have 128MB
Replies: 21
Views: 16734

Re: "Not Enough Memory" Even Though I Have 128MB

My Garou CRC32 is 25D2E39E, if it helps. I've just had a look and realised that, of course, the NeoGeo roms are no zipped so I'm not sure what file to check the CRC32 of. I did try quickly zipping the directory and seeing what CRC32 it had and it didn't match, but that's not entirely surprising as it could be that it used a different compression a...
by aToyRobot
Fri Jul 17, 2020 10:16 pm
Forum: Neo Geo MVS / AES / CD
Topic: "Not Enough Memory" Even Though I Have 128MB
Replies: 21
Views: 16734

Re: "Not Enough Memory" Even Though I Have 128MB

rhester72 wrote: Fri Jul 17, 2020 6:23 pm My Garou CRC32 is 25D2E39E, if it helps.
Thanks, I'll check that out tomorrow
by aToyRobot
Fri Jul 17, 2020 3:20 pm
Forum: Neo Geo MVS / AES / CD
Topic: "Not Enough Memory" Even Though I Have 128MB
Replies: 21
Views: 16734

Re: "Not Enough Memory" Even Though I Have 128MB

Thanks rhester72, I'll do some digging and see if I can work out if there's something up with the rom set. I thought I had got the Darksoft pack (from archive.org) but then it's quite probable I got the wrong one, I was still learning how to set up MiSTer at the time.
by aToyRobot
Thu Jul 16, 2020 10:06 pm
Forum: Neo Geo MVS / AES / CD
Topic: "Not Enough Memory" Even Though I Have 128MB
Replies: 21
Views: 16734

"Not Enough Memory" Even Though I Have 128MB

Hi all
With a few games on NeoGeo I get a 'Not enough memory' message even though I have the full 128bm SDRAM. I have run a memory test on it using the memory test core and it's come back as all good so I'm a little confused. I get the message and corrupted graphics on Garou and KOF for example.

Anybody got any ideas as to what could be wrong?

by aToyRobot
Thu Jul 16, 2020 4:00 pm
Forum: Amiga (Minimig)
Topic: What cable so I need to connect MiSTer IO board to 1084s-d2
Replies: 4
Views: 3989

Re: What cable so I need to connect MiSTer IO board to 1084s-d2

In the states some companies appear to sell a specific VGA to RGB (hd15 to db9) cable which may work. In the UK these cannot be found anywhere. Also it appears that a lot of hd15 to db9 cables are NOT wired correctly to connect MiSTer to a 1084S (I know this, because I bought one and tried it) In the end I ended up making my own converter using a c...
by aToyRobot
Thu Jul 02, 2020 11:19 pm
Forum: Display Devices
Topic: Using the scaler to downscale to 15khz
Replies: 22
Views: 17689

Re: Using the scaler to downscale to 15khz

Still, I'm not sure why Atari ST outputs 31khz only. It was one of its possible frequencies (for hi res) but majority of people used it with normal 15Khz TVs, via RGB or composite in the lo res mode. Could be the same for BBC. Odd, Atari ST works great for me on 1084S 15khz monitor, yet as you quite rightly point out it says 30khz on the Wiki. I w...
by aToyRobot
Wed Jul 01, 2020 6:25 pm
Forum: Display Devices
Topic: Using the scaler to downscale to 15khz
Replies: 22
Views: 17689

Re: Using the scaler to downscale to 15khz

Thanks Sigismond0, I just tried that - it's a shame because it's so close to being usable, it's just text is illegible. I presume these old CRTs cannot handle the higher resolutions we need?

Maybe I need to consider a way to switch between monitors as part of my case build... Something to think about.
by aToyRobot
Wed Jul 01, 2020 12:08 pm
Forum: Display Devices
Topic: Using the scaler to downscale to 15khz
Replies: 22
Views: 17689

Using the scaler to downscale to 15khz

Hi All I have my MiSTer very happily connected to my Commodore 1084S which works great. This is a 15khz monitor so perfect for most things such as Amiga and consoles. However I was thinking it would be fun to try some really old DOS games, however ao486 only supports higher refresh rates. I was wondering if it is in anyway possible to use the scale...
by aToyRobot
Tue Jun 30, 2020 2:09 pm
Forum: Other Computer / System Cores
Topic: Floppy drive sounds
Replies: 41
Views: 19121

Re: Floppy drive sounds

I have started work on interfacing real floppy drives for this very reason. For the most part it works well with Amiga, a bit hit and miss on Atari ST. Will look probably at ao486 next. I need to get the adapter board finished. Will this also allow booting from a real floppy disk or is this purely for the sound? I'd quite like the sound aspect (it...
by aToyRobot
Mon Jun 29, 2020 7:18 pm
Forum: Amiga (Minimig)
Topic: Shared Folder Discussion
Replies: 81
Views: 39978

Re: Shared Folder Discussion

I have updated my main MiSter firmware and this is now working. The share is visible on the workbench desktop and the files that I added to the SD Card are visible. This is going to make file transfer much less of a hassle

Thanks for this Sorgelig, and all of the work you do on MiSTer in general
by aToyRobot
Mon Jun 29, 2020 7:07 pm
Forum: Amiga (Minimig)
Topic: Shared Folder Discussion
Replies: 81
Views: 39978

Re: Shared Folder Discussion

bbond007 wrote: Mon Jun 29, 2020 7:03 pm Did you update Minimig_AGA.rbf and MiSTer?
I updated Minimig, but not the MiSTer firmware (I had somewhat forgotten that you could), perhaps that's it. Will try that and report back.
by aToyRobot
Mon Jun 29, 2020 6:44 pm
Forum: Amiga (Minimig)
Topic: Shared Folder Discussion
Replies: 81
Views: 39978

Re: Shared Folder Discussion

I'm afraid to report that this doesn't work for me. I have updated to the latest version of the core (manually, downloaded from github), added the mount config and installed the driver files as per your instructions. When I run the mount command on the CLI I get no output, but the CLI locks up. I wonder if I've done something wrong, for example I h...
by aToyRobot
Sun Jun 28, 2020 11:12 pm
Forum: Amiga (Minimig)
Topic: Looking for Amiga driver developer
Replies: 34
Views: 16556

Re: Looking for Amiga driver developer

Sorgelig wrote: Sun Jun 28, 2020 11:06 pm no. The driver in apolkosnik repo is for a314. It's of course not compatible with MiSTer
Apologies, I thought this was the modified version you were asking about in your original post. I shall wait patiently for more info.
by aToyRobot
Sun Jun 28, 2020 10:51 pm
Forum: Amiga (Minimig)
Topic: Looking for Amiga driver developer
Replies: 34
Views: 16556

Re: Looking for Amiga driver developer

This sounds pretty exciting, I've been following this thread for the last few days and wanted to create a post to see if I could give it a try. Just so I understand, is this the correct process?: Ensure you have a directory available at /linux/media/fat/Amiga/shared on your sd card Install the AmigaOS/Workbench driver provided by apolkosnik Reboot ...