MiSTer FPGA Forum

Well spotted! Thanks so much, that fixed both issues, I was ready to destroy the board

I wonder if someone can help me, I just got an io board and I’m having a couple of issues, when I connect the mt32pi I get a garbled picture on the little oled screen, I also have problems when using mega drive/Genesis controllers via snac, everything works as it should with the digital io board so I’ve eliminated it to the analogue board. I’ve inc...

I’m using the latest megaags too, I think I may have copied them over wrong, I’ll try again

Edit: I think I somehow copied without overwriting, I copied using directory opus and all is well (facepalm)

Thanks for this LamerDeluxe, I have a slight issue with a few of the games, some of them seem to hang on the loading screen

Atrac17 has a CX TV and he has up to 6x settings for most cores on his patron account, they are unlocked for everyone

https://www.patreon.com/atrac17

I use his settings for all my cores

Sorry for off topic but didn’t want to start a new thread, would MT32-pi support be possible? I would imagine it may be a problem as it doesn’t run as a native core and you can’t access the OSD

I’ve been hoping for some updates to this core, oh and MT32-pi Support would be brilliant!

Update: so although my io board looked fine I decided to remove all the pins and re solder new ones myself and everything is now working perfect, either a dry solder joint or a bridge somewhere

Yeah I actually checked there, both jumpers on the snac and MiSTer are set correctly, I should also add I have two Megadrive pad adapters from different sources, both the same problem, I’m ready to give up

I’ve replicated the issue with 4 original controllers and 2 third party controllers, the snac board works perfect with pc engine and SNES controllers, I’ve tested with a multimeter and it seems fine, I’m completely lost

I wonder if anyone would be able to help me out here, I have a USB 3.0 style Snac board and have the analog v6.1 io board. As far as I’m aware I have all the jumpers set correctly and I have pin 10 on connector P7, I’m using Sonic the Hedgehog to test. The problem I’m having is when I push Right Sonic jumps to the right, when I push B Sonic also ju...

I bought A few snac items and other accessories, great communication and service also very helpful with a couple of issues I had, I will definitely be buying from again in the near future

Has anyone had any luck getting CD-ROM support in windows 95 with the latest update? EDIT: I know this was posted in the wrong place but for anyone else in the same boat I got the CD-ROM to work by adding the following to the config.sys DEVICEHIGH=C:\DOS\oakcdrom.sys /D:mscd001 DOS=HIGH, UMB FILES=30 LASTDRIVE=Z I don’t think all of the above is re...

Alrighty! I wonder if any of you kind folks will be able to offer me some advice, I’m connecting my MiSTer to a 4K tv via my Amp which upscales the 1080p image to 4K, the reason I do this is because it does a better job at upscaling the image, much sharper! The problem is when I turn on the upscaling the screen sort of looks like it’s zoomed in to ...