MiSTer FPGA Forum

When it comes to TV signals, double check if there is a PC mode (or similar) to the input you have selected.

I was continually changing settings on my MiSTer before I realised it was actually the Samsung input display settings changing things. So just check that out too.

Massive thank you to Pierco for this and indeed Tonton for getting a few ROMs compiled too...

While not exactly a direction I ever expected Mister to take, I'm still very impressed by the results.

Just looking at this while even the prototype stage has me excited, but could someone clarify if my presumtions are correct for the following: 2 pads via 1 SNAC? That Yellow Phono... Could that be for a Lightgun? Please say it is... *EDIT Just noticed this on the PSX-Mister Github... SNAC can be selected for each port and will support gamepads and ...

Yup my bad there, but yes to above (i2s). As it brings the audio back to the MiSTer and outputs through itself.

Do double check that audio was not going to the headphone jack of the pi if you are still having issues.

You may find that the output is still defaulted to the headphone jack on the Pi itself, plug some in and check, but to fix this go and find this in the config file on the MT32-Pi SD card: [audio] # Select audio output device. # # Values: pwm*, i2s # # pwm: Use the headphone jack # hdmi: Use the HDMI port # i2s: Use an I2S DAC output_device = pwm An...

Sounds like you need one of these:
https://misteraddons.com/products/mistercade

Remember that everything is case sensitive too...

If your paths have capitalization (or not) on your SD card they need to be exactly the same on your HDD too, I had similar issues when moving my ao486 archives around, was head scratching for a long while before I noticed.

Awesome work, absolutely love it...

May I make a suggestion for a future pack?

How about the Lucasfilm Adventure games?

Taken from the GitHub page (https://github.com/MiSTer-devel/Arcade-SpaceInvaders_MiSTer) Scripts and Such Color Overlay The Midway games often shipped with a plastic color overlay to add color to the games. The Taito boards had color overlay hardware. This included two roms (one for each direction of cocktail games) that added color in a fixed posi...

Is anybody selling these new versions yet? MisterFPGA.co.uk appears to be selling the new version. https://misterfpga.co.uk/product/mister-sdram-128mb-module/ Not had any issues with my previous module to be honest, so will need a good reason to open up my Aluminium Mister case and replace with this one. Should be noted that Nat also does some goo...

lroby74 wrote: ↑Wed Jun 02, 2021 3:28 pm trains games was 2 then and not only 1!! Evening Star & Southern Belle!
I didn't knew it, thank you

Think it goes without saying, but both are indeed available on the Higgy releases

Evening Star wonderful train simulator that you leave a demo run and it chugs along all the stations , great stuff ! I know this game like Southern Belle (played a lot on C64 and Spectrum) : https://en.wikipedia.org/wiki/Southern_Belle_(video_game) Yes Evening Star was the prequel to Southern Belle, but SB was also released on BBC Micro (and Elect...

For those who enjoy the old Magnetic Scrolls games, Strand Games has just converted the 16bit classic Wonderland to the Spectrum Next. You can find the build here: https://gitlab.com/strandgames/brahman/-/tree/master/zxnext_magnetic/games/wonder/build Also the rest of their conversions of the Magnetic Scrolls classics can be found here: https://git...

Yes, it's possible to add a second VHD. I just need more info about it. There is a signal to select a secondary SD card but i don't know for example how to select SD card. In main Specrtum menu i see on bottom "CM" but how to switch from C to M? Yes it is within this menu, when looking at the Browser listing you simply press 'D' (Drive) ...

A tiny question if I may, the Next in real hardware terms has an option to add another SD card and thus appears as Drive D. So my question being is there a way to have 2 SD cards (or images) running as separate drives? (Within the MiSTer core that is) NB: I do have a Real Hardware Rev.1 Next (Inside a 48K modified case), and use this 2 card method ...

https://misterfpga.co.uk/

I'd recommend this guy for everything, especially if you live in the UK, prompt delivery and amazing workmanship top quality service.

Have you closed the Jumper of the SNAC itself when using Megadrive/Genesis controllers? 20210207_110026.jpg Nat from MisterFPGA.co.uk has a great guide for this and can be found here: https://misterfpga.co.uk/sega-genesis-controller-snac-setup/ A worthwhile read, if only to check the most obvious bits, and if only to check you haven't missed someth...

It depends if you have a Digital or Analog IO board but yes the switches on the DE10 are important.

Turn your DE10 so the switches are at the bottom of the board with the Network port on the RIGHT.

Analog IO - Down-Down-Down-Down
DIGITAL IO - UP-Down-Down-Down

Would be great to see another Memory Tester publicly released with new Speed Displays, so the non-hardware people can test their setups. I'm sure my memory is as good as it can be (128mb) but at speed who knows, I've had the odd memory-glitch: although recovered with reboots, and I'd rather be able to test before asking questions to the person why ...

Sometimes I have noticed if the SD card is not inserted properly the DE10 doesn't boot. Must admit it's caused me a few heart stopping moments, but I've learned to check for this if my DE10 doesn't power on as expected.

All you need to do is rename the file so the extension reads VHD. Then the MiSTer can read it so you can mount it within the menus. To make things even simpler and get your MMB to auto run when you launch the BBC Micro core then name it as 'BOOT.VHD' and place it in the 'Fat/Games/BBCMicro' (on your main internal card - the one on the DE10), as wel...

I had the same, but it's already been updated.

Just jump onto the github and grab 'Arcade-SEGASYS1_20201116.rbf', manually add this (it goes into the CORES folder) and delete the old one. Things should work fine after that.

Thank you for the update i was taking a look and i tried to load yie ar kung-fu and it says says missing files so tried yie ar kung-fu 2 and got the same is there a special way to load these games the other games i tried worked great thanks again Yie Ar Kung-Fu: ESCAPE from the MENU (ESC) *DIN 137 CHAIN "YIE_AR" Yie Ar Kung-Fu 2: ESCAPE ...

Thanks for the info. Appreciated.

Just intrigued me as to what the solderpad was for initially, so went onto the schematic docs to find out what it was.

I've noticed on the RTC 1.3, the extended part has solder pads for a temperature sensor (underside). So... 1) has anyone actually got a temperature sensor on their board? 2) if there is a sensor in place, does MiSTer actually read the information? 3) can you just add said sensor, and it would work? BTW - The sensor is listed as AD7415-0 / AD7414-0 ...

A quick compatibility question for people using this if I may... Has anybody had any luck getting Broken Sword 2.5: The Return of the Templars (Fanmade game) running on MiSTer? As when I try and launch it I am just presented with a black screen and no obvious activity. From what I've seen it is supposed to work but as it's resolution is 800x600 I f...

Im brand new to Mister. Do most of the Jotego Cores need the SDRam add on? Unfortunately yes, the only one (i think) you can run without extra SD Memory is Ghosts & Goblins. What I can add is which cores DO NOT work without SDRAM board (I tried them all out while my SDRAM board was stuck in transit). 😀 As a rule of thumb, all ”simpler” arcade ...

That's exactly the same Gauntlet discussed in this thread. It's received fixes every few days for a couple weeks now. Okay, didn't actually realise this, as the version I was looking at was looking at mame220, whereas this build looks at mame223. Also it's mra shows up as Gauntlet (Set14). Didn't actually know where the guthub was as I'd taken it ...

Just wanted to throw this up here: https://github.com/d18c7db/Gauntlet_FPGA (Main) https://github.com/d18c7db/Gauntlet_FPGA/tree/master/rtl/boards/MiSTer/_Arcade (MiSTer specific bit) Updated a few days ago, (with the Alternatives too) BTW - Also appears to be working on an implementation of Atari System 1, but don't rush to download just yet, no p...

Your procedure is correct, but you must create a folder "bionicc" on the SD card to put the roms there. Files at the root don't seem necessary Thanks again Okay, edited the last few lines to reflect that... :D you could just remove the dip settings part out of the mra and it will work there is no need to build a rom or use the alts as th...