MiSTer FPGA Forum

jvas wrote: ↑Fri Oct 08, 2021 3:54 pm

immaburr wrote: ↑Sun Jul 25, 2021 3:00 pm Had this problem with my external hard drive and trying to update the AO486 Top 300. This post:https://askubuntu.com/questions/197459/ ... ile-system helped me fix the problem

Can you tell me what the solution was? I'm dumb to linux...

mount -o remount,rw /

Please delete if not allowed

Hi My folders are mounted to my NAS using CIFS script When I run the top 300 update script, the script finds the VHD in games/ao486 and downlaods the update. Script then fails to create folders in E and reports loads of errors including the following (these are just from the last few I can read on screen): "cannot create /tmp/dos_games/E/util...

Nat wrote: ↑Wed Jun 23, 2021 11:20 am Have a check for bridges / shorts on resistor networks RN12, RN13, RN14, and RN15

Looking at the pictures it seems you have a bridge on RN12 see where I've marked it on the below image.

Possible RN12 Bridge IO Board.jpg

Thank you for this! I reflowed the contacts and tested and all seems to work now.

Thank you again for everyone's help!

I've attached shots of the I/O board I'm using. Please let me know if you need any closer shots.

How long is the cable you are using? Also, you can use a separate power supply for the pi safely if you turn the mt32-pi power switch OFF- that will disconnect the power lead from the MiSTer. I'm using a USB 3.0 cable that came with the MT32-pi hat. If I turn the hat off and use the power supply with the PI I get the same errors if I'm also connec...

Hello everyone, Seeing this error on the LCD screen when trying to start the MT32-pi. Connected only to the USER I/O port: "UART framing error!" It's also jumping through some other errors but they are too fast to read. If I comment out PSU errors from the wiki the error messages cycle through the above and something "break". Sa...

I figured out the VGA and HDMI out are both tied to the same mister.ini file - the alt_1.ini is just an alternate config if you so choose.

Still trying to change the the wallpaper on the PVM side.

I sort of discovered on accident recently that the IO Board on my MiSTer can output VGA to my PVM and to HDMI simultaneously. I seem to have everything configured however I have a few questions: Does the MiSTer.ini apply to the hdmi output only and the MiSTer_alt_1.ini apply toward the second display (VGA?) Is there a way to change the background w...

A follow up to this make sure you "Define Joystick Buttons" and define each controller as outlined here: https://github.com/MiSTer-devel/Main_MiSTer/wiki/Main-Joystick-Mapping#mister-gamepad You will need to then map the controllers you wish to use to each core. I didn't fully map my controllers to the initial OSD outlined in the link I p...

Thank you for this info and I apologize, when I asked this in the discord I thought you were talking to someone else

I also 100% agree!

Odd problem for me - I have a mister setup with the blissbox 2.0 - not using any llapi ports just 3 usb ports for wireless keyboard, bluetooth and usb controller. I can register and define buttons inside the core/games on my usb and bluetooth controllers just fine but it won't let me interact with any of the games after that. (Example I can't press...