Search found 16 matches

by Thad
Wed May 12, 2021 7:53 pm
Forum: Other Console Cores
Topic: Atari Lynx Core
Replies: 63
Views: 23964

Re: Atari Lynx Core

In the GameBoy core I use boot1.rom for the BIOS and boot2.rom for the ROM to open, have you tried that? Good news/bad news on that. The good news is, boot1.rom/boot2.rom works; the ROM loads at startup time. The bad news is, whatever was happening before that fixed my picture when a ROM got loaded, it isn't happening anymore; I assume a core upda...
by Thad
Fri Apr 16, 2021 10:29 pm
Forum: Other Console Cores
Topic: Atari Lynx Core
Replies: 63
Views: 23964

Re: Atari Lynx Core

Is there any way to get it to automatically launch a specific ROM when you open it? I have the same rolling picture issue with this core that I do with several others; opening a game fixes it, so I'd like to have it automatically load a game at start. (The boot.rom doesn't do it.)
by Thad
Tue Oct 13, 2020 8:42 pm
Forum: Display Devices
Topic: Rolling picture with YPbPr
Replies: 38
Views: 20280

Re: Rolling picture with YPbPr

My main guesses: - There's something inherently wrong with these composite-oriented consoles sending a proper h-blank v-blank signal over component. A good way to test this would be with real Genesis or SNES hardware with component output on the same TV. Haven't had a chance to do this, sadly. I have. I've hooked up both a SNES and a Genesis (mode...
by Thad
Fri Jul 03, 2020 12:25 am
Forum: Display Devices
Topic: Rolling picture with YPbPr
Replies: 38
Views: 20280

Re: Rolling picture with YPbPr

I still don't have a fix, but I found a workaround for Game Boy. For whatever reason, if I enable Super Game Boy and load Mega Man 5, it fixes the rolling picture -- and once it's loaded, I can switch games; other games work fine after that (even if I turn off SGB mode). So I just enable SGB and save my settings, then make MM5 my boot2.rom and now ...
by Thad
Tue Jun 30, 2020 10:18 pm
Forum: Display Devices
Topic: Rolling picture with YPbPr
Replies: 38
Views: 20280

Re: Rolling picture with YPbPr

Thanks Shogun, glad to hear that worked for you.

Unfortunately, no such luck here; I tried refresh_min=59, refresh_max=60 and it didn't change anything for me. The search continues...
by Thad
Wed Jun 24, 2020 5:51 pm
Forum: Linux
Topic: Wi-Fi not starting reliably
Replies: 21
Views: 13915

Re: Wi-Fi not starting reliably

My experience is that wifi works on hard boot but not on a soft reboot. So if, for example, I run the update script and it reboots afterward, wifi no longer works until I power-cycle.

Using this wifi dongle: TP-Link TL-WN823N N300 Mini USB Wireless WiFi network Adapter for pc, Ideal for Raspberry Pi,Black
by Thad
Mon Jun 08, 2020 12:04 am
Forum: Linux
Topic: TP-Link TL-WN823N "Failed to bring up wlan0"
Replies: 1
Views: 2814

TP-Link TL-WN823N "Failed to bring up wlan0"

EDIT: Wifi is working now. Not sure what changed; I power-cycled a couple of times and left the system running for awhile. Don't know what I did to fix it, but just in case that helps anybody who has a similar issue I'll leave this up. -- Hello, I just bought this wifi dongle: TP-Link TL-WN823N N300 Mini USB Wireless WiFi network Adapter for pc, Id...
by Thad
Sat May 30, 2020 3:54 pm
Forum: Display Devices
Topic: Rolling picture with YPbPr
Replies: 38
Views: 20280

Re: Rolling picture with YPbPr

Thanks foldor, The SOG switch on my board isn't labeled with "off/on", it's labeled with "AUTO/OVR". I've got it set to OVR, which I think is the equivalent of "on"; if I set it to "AUTO" then the picture rolls all the time, not just some of the time. I've also updated my OP with more information, including (...
by Thad
Wed May 27, 2020 10:40 pm
Forum: Sellers
Topic: MisterAddons.com / MiSTerFPGA.com / Amazon.com
Replies: 28
Views: 58120

Re: MisterAddons.com / MiSTerFPGA.com

I'll just add my voice to the chorus: I bought my entire MiSTer assembly from misteraddons.com; it arrived quickly and works great. I expect to buy more accessories there in the future.
by Thad
Wed May 27, 2020 10:31 pm
Forum: Neo Geo MVS / AES / CD
Topic: Blank screen when I load the core
Replies: 16
Views: 14265

Re: Blank screen when I load the core

I had a similar issue and it was the FTP method I was using to transfer the Roms to the SD card. When I changed the transfer method to binary from auto it resolved the issue. Strangely enough it only happened on NeoGeo Roms. I suspect there was some filesystem corruption caused somewhere in the chain of microSD card -> SD card adapter -> card read...
by Thad
Tue May 26, 2020 1:27 am
Forum: Neo Geo MVS / AES / CD
Topic: Blank screen when I load the core
Replies: 16
Views: 14265

Re: Blank screen when I load the core

It looks like it's the SD card. I tried another one and it works.

Thanks for your help.
by Thad
Mon May 25, 2020 10:29 pm
Forum: Genesis / Mega Drive, Sega CD, 32X
Topic: Blank screen when I load the MegaCD core
Replies: 6
Views: 4774

Re: Blank screen when I load the MegaCD core

I tried the CDX BIOS to see if it gives me the same error as RuBEn. It doesn't; I just get the same blank screen as I do with the other BIOSs I've tried. (In case this tells anyone anything, the md5sum for the CDX BIOS I have is baca1df271d7c11fe50087c0358f4eb5) ETA: It looks like there's something wrong with the SD card; I tried another one and I'...
by Thad
Mon May 25, 2020 10:25 pm
Forum: Neo Geo MVS / AES / CD
Topic: Blank screen when I load the core
Replies: 16
Views: 14265

Re: Blank screen when I load the core

The rbf file is NeoGeo_20200510.rbf. I'm assuming 20200510 is the version? At any rate I just ran update.sh so it should be the latest.
by Thad
Mon May 25, 2020 5:43 pm
Forum: Genesis / Mega Drive, Sega CD, 32X
Topic: Blank screen when I load the MegaCD core
Replies: 6
Views: 4774

Blank screen when I load the MegaCD core

Hi, This is similar to a problem I'm having with the NeoGeo core . Sorry for another post repeating a lot of the same information, but even though it's the same symptom I'm not sure if it's the same cause. I suspect a BIOS issue but I don't know for sure that's what's causing it. I haven't been able to get the MegaCD core to boot at all. I have the...
by Thad
Mon May 25, 2020 4:36 pm
Forum: Neo Geo MVS / AES / CD
Topic: Blank screen when I load the core
Replies: 16
Views: 14265

Blank screen when I load the core

Hi there, I haven't been able to get the NeoGeo core to boot at all. I have the 128MB SDRAM add-on (in case it helps there's more info on my setup in the thread I posted yesterday). When I try to boot the core, I get a completely blank screen and no inputs seem to work, including the reset button on the IO board. (The Linux environment is still run...
by Thad
Mon May 25, 2020 3:54 am
Forum: Display Devices
Topic: Rolling picture with YPbPr
Replies: 38
Views: 20280

Rolling picture with YPbPr

Hello there! I'm new to MiSTer, and I'm having some trouble with the refresh rate when I boot some of the cores. I'm using an NTSC CRT TV with YPbPr inputs. (The brand is Magnavox; I'm not sure what model, but I can try to figure it out if that will help.) (ETA: I believe the model is 20MT4405/17. I haven't hauled the TV out to look at the sticker ...