MiSTer FPGA Forum

Hey Everyone I am new to the x68000 core. I have it up.and running and have been able to get it to boot a HDF of Final Fight. I am.not using MT-32 just connecting using standard HDMI to a flatsceen. I am getting the music of the game coming through ok but am not getting any sound effects. Punches kicks etc. I know I must be doing something wrong bu...

@Flandango and @jedimatt42 Thanks to both of you for your efforts on the TI-99/4A core and the TIPI support :) I did some testing on both a standard I/O board and the Mister MultiSystem with both a Pi ZeroW and a Pi3B+ with the upgrade to 2.31 and adding in TIPI_SIG_DELAY=100 to the tipi.config file and changed the tipiports.c file back to //delayM...

@Flandango - I did a little bit more investigation with the MiSTer MultiSystem board and I have found that the PI and the MultiSystem boards ARE talking to one another as I have been able to get into Force Command and initiate a DIR command. However most of the time it locks up half way or some way into the directory listing. Sometimes just as the ...

@Flandango - Will give it a go and see what happens. I am pretty sure that the MultiSystem board is to blame as I don't have a problem with the other IO/Boards User Ports..... But I need to give it the benefit of the doubt... Thanks so much for all your help

@Flandango - I will give it a try when it is ready. Thanks for all your help!

@Flandango - Thanks for your response. It is the darndest thing. I can get the Raspberry Pi3B+, 4 and ZeroW (with the delay timing modifications) to work on the MiSTer Digital I/O board and the cheap Alliexpress I/O board but not the MultiSystem board. I have checked the IO6 jumper and the 3.3V/5V jumper on the board and both are set correctly. Is ...

@Flandango. OK quick update... I did the edit to the tipiports.c file and got the Pi ZeroW to respond to the F18A core on both my v1.2 MiSTer Digital I/O board and a cheap Alliexpress I/O board. So it would seem that all is good... well not quite.... :) When I tried it on my new MiSTer Multisystem board it either didn't work at all (CALL TIPI hangs...

@Flandango. Thanks so much for your help. Will give it a go and let you know. I have a bit of experience with Linux so should ve ok I think.

I was wondering if anyone had managed to get TIPI support on the F18A core running on a Raspberry Pi ZeroW? I did get it running on a Raspberry Pi 3B+ but even with the same wiring and same setup I was not able to get it going on the zero. CALL TIPI just hangs forever.

If anyone got it working and can help it would be appreciated.

What's the best video mode anyone's found for 1080p display with scanlines? I'm currently using video_mode=10, which is OK-ish (but the scanlines aren't completely even)...the bigger annoyance is the aspect ratio is noticeably too wide. @rhester72 I agree that I am also seeing that the aspect ratio appears to be too wide and I am seeing some of th...