MiSTer FPGA Forum

i think the values you posted are the hex values needed.
The gg file can be edited with any text editor
i believe

win32imager does the whole card.

https://junkerhq.net/xrgb/index.php?tit ... test_suite

Use this ROM to calibrate your CRT. They have ROMS for all systems.

PSX comes to mind as a console with games spanning multi disc. Single CHD games in a folder of the same name of the CHD simply launch , folders that have muliple CHD in them,will load when you mount them without reset. So games in folders is best for CHD in the PSX core at least. IMO.

Are you using a new Mister file?
Update_all should grab it, but it should work out of the box

Your Mister.ini is really dated, with the YC encoders you need to set the videomode, see this INI.

https://github.com/MiSTer-devel/Main_Mi ... MiSTer.ini

Taken from Mister addons.
https://misteraddons.com/products/yc-ac ... oder-board

MiSTer.ini settings:
vga_mode=svideo (never use cvbs setting)
ntsc_mode=0
composite_sync=1

Hmm it looks ok, remember just in case, Linux is very case sensitive, so make sure its correct down to the extention.
Also maybe try this one, to test there isnt anything else wrong.
**random:snes

If that works it may be an issue with the file name , or maybe it doesnt like the + in the file name.

I use this with a ps5 controller, it has the least input lag of any xbox or 8bitdo controller I have.

https://www.amazon.com/dp/B08DFBNG7F/

Also, if you didnt get a 128 ram module you will need it for some cores.

Here is a side pic of the mech and the switch for this type of coin mech.

I have a suzo happ coin door, the coin itself is a simple cherry micro switch (like a button) , its the light that requires power and I power that separately.
Link to your coin door for reference?

Im in so-cal

Can you post the contents of your Mister.ini ?
Can you tell us more about your display and how your connecting to it?

I suppose when you bind your keys for the game, when it prompts for coin press start and when it prompts for start press select and if it’s reversed it will work as you expect it.
Most arcade cores have bindings all over the board.

I think if you use the MRAs\RBF from Blackwine you can do that.
https://www.patreon.com/posts/missing-files-60446967

I think there is a jack for like ADC data in (something commodore tape players used) on some mister builds, it looks like a headphone jack but isnt.

https://github.com/MiSTer-devel/Wiki_Mi ... ape-input)

Not saying this is your issue, but Im not familiar with your setup. There are many variations.

I believe in thecode before you upload it to the ardruino board, you are able to specify a controller id. As long as they dont share the same id it should work ok. I have a couple TimsVille 3 port adapters I programmed and used 8bitdos 2.4 ghz adapter ok.

Thanks for that info and thats what Mister uses, so it seems like the Volts and amps would be fine.

Also keep in mind there is launching via MGL so you dont have to have multiple RBfs , as well as a script that will make a fav list for you.