MiSTer FPGA Forum

Also, no sound when i choose mt32 from the setup of the game. So, i am not sure why it is not working. I followed the setup. Step by step. Please advise. Any ideas? Thanks As you did not post an image of your mister, without a case. For the analog mister you need a jumper next to the use port. But for both analog and digital, the pins along the ra...

Also, no sound when i choose mt32 from the setup of the game. So, i am not sure why it is not working. I followed the setup. Step by step. Please advise. Any ideas? Thanks h9ZeHCB.jpeg As you did not post an image of your mister, without a case. For the analog mister you need a jumper next to the use port. But for both analog and digital, the pins...

Other then the pins, jumpers is also needed.

An image of your io board will help solving this issue.

I'm away from the screen right now. Will report back Monday.

I'm also using presets, filters.

So, with levels below ground, with all its twinkling stars(?) I get flickering on the screen no and then, like a fast white flash. Samsung G5 32 inch.

Sync at 0. Using 1920x1440.

Is it my monitor or somthing else?

Issue regarding kings Quest has been crated.
https://github.com/MiSTer-devel/ao486_MiSTer/issues/117

Speaking of debugging. If someone felt like a challenge then Kings Quest VII no longer works in the core and the Top 300 pack but used to back in 2020 when I built the Top 300 pack: https://youtu.be/-Y4wqaFUNhs?t=12990 This is back in Nov 2020 and you can see it made it passed the Title screen but now in the current core it will lock after the Sie...

It's hard out there so why not crate a list. I have a Samsung G5 32 inch 1920x1440 works Sync 0 (tested 2 but had issues with gameboy, but after learning gameboy is not the best for testing this, I have to re-test) Looking for a new, non curved screen, I had a hard time finding recommendations. Yes, I've seen the proart thread, plan on adding that ...

Did you try changing the display setting, in the mt32-pi menu?

Have you manually updated your mt32-pi? If so, there might be some settings in tech mt32-pi ini file that needs to be changed.

Also, can you post an image of the soldered pins, next to the io port, where you plug in your mt32-pi.

Thank you I have put the .MD files in the same directory as the core - IE on the SD drive with the cores for all the consoles - Should I have them somewhere else? I can see load *.BIN,GEN,MD If I hit return I get <UP = DIR> A = No files So close to getting this right I think Well, look here. Iso is not supported. (don't have the psx core, do did n...

Rog wrote: ↑Wed Apr 20, 2022 2:15 pm As I was recently told, try the GBA games, they don't need the SDRAM, 486 stuff works too.

Gba games, I think, you have to change the setting so it uses ddr3 instead of sdram.

OK I have myself up and running - How do I get a game to run - I have so ISO files and I can see the core on the list. But I cannot see how to get them to play? so close HELP! John Load the core, if the menu don't pop up, press F12. Top option should be selected, here you see the supported formats. Press A. List of games with supported file extens...

akugou wrote: ↑Mon Apr 18, 2022 11:23 am Changed it to /media/usb0

still get the same error messages -.-

Looking at what you wrote, that's not line one. I think there is somthing wrong with your script.

akugou wrote: ↑Mon Apr 18, 2022 8:08 am isn't that depending on which usb port i choose?

I dare say with confidence, that's not how it works. And I don't even use a USB drive.

I say change the path to /media/usb0

akugou wrote: ↑Mon Apr 18, 2022 7:29 am Thanks for the reply! I changed the ini file and still get the same errors -.-

Why is your path usb1 and not usb0?

So I grabbed [MiSTerFPGA] Sharp X68000 Starter Pack when booting I get a blank screen. I notice the images are HDFs when the github asked for HDDs and FDDs. Does this matter? So far all I have is the rbf in the usual folder and a bunch of HDFs. Is this like the AO486 where it needs a boot rom? Also, I'm running mine off of primary sd since a kind ...

Debu_Ranger wrote: ↑Sat Apr 09, 2022 8:48 pmThank You.

Nice soldering, grate that it all works now.

Greetings! I'm trying to get the update to work after installing the initial pack from archive.org. Copied the ini and sh file to the scripts and changed the ini file to the right directory /media/usb1/games/AO486 but once i run the script i get the following error message: /media/fat/scripts/ao486_update_top300_pack.sh: line 1: {rtf1ansiansicpg12...

Krakout wrote: ↑Fri Apr 15, 2022 8:47 am

Karmeck wrote: ↑Thu Apr 14, 2022 9:23 pm

*rambling of a mad man*

Works flawlessly And much harder than I remembered it to be!

I made it harder.

Here is a 4 min video explain how to do it the easy way:
https://youtu.be/Q2BfBEmRakk

After that you can simply ftp files in. Still need to move them from the shared folder though. According to the video.

trying to play Tyrian, I'm experiencing slowdowns and speed up. Clouds slow down the game. watching the YouTube configuration video, there was no issue with the game.

Ahhh thanks, obligated. I was looking for an option, didn't occur to me to go there... I think the version I sent you is Windows only? I think it is the same version that is already out there. And that version Can be played in dos box. So I think it's dos. Ah damn, it's the Polish version, got to find my English version... Tried running it with a ...

Krakout wrote: ↑Thu Apr 14, 2022 12:18 pm Ahhh thanks, obligated. I was looking for an option, didn't occur to me to go there...

I think the version I sent you is Windows only?

I think it is the same version that is already out there. And that version Can be played in dos box. So I think it's dos.

Are we still adding games?

Lurid Land
Happy land

Krakout wrote: ↑Thu Apr 14, 2022 11:58 am Well I also have an iso of the game, maybe we could try with that, but then how to add it to the interface?

Here, at 05:16
https://youtu.be/WPAgOffVcAg

Must have it somewhere, I was a beta tester back then for it after discovering a couple of bugs 😅 Let me dig into my archive and will let you know. And I'll also have to learn how to add games to the Top 300😄😄 Looking at one of the YouTube videos. A suggestions is to crate a floppy image. Put the files in there and then move it to the mister and m...

Krakout wrote: ↑Thu Apr 14, 2022 10:43 am Lurid Land? is it part of the Top300?

Sadly not. It's just a game from my youth.

I see now that it could be played on dos. I have to try that. First I have to find lurid Land again.

Edit: well, that was not hard. Now I just have to learn how to add games. I remember it was in one of his videos.

Finally got a new, bigger, sd card. Copy over top 300 and evrything just works. Over the years, talking about Lurid Land, ppl alway compared it to lode runner, so I thought I give that a go. Did not want to load. So I though I look at the YouTube video when it's being setup. (this was in bed, with no time to get up) So I see you had simular issues ...

Bought a model m from 1994.

82g2383

Will report back when it arrive.

Now, some might call me a hypocrite for buying the model M, despite my initial post.

Well, I found it for 100€ and within the eu. So no customs.

Like this one

https://www.amazon.se/dp/B09B12PDZX/

Instead of buying an old ibm keyboard for several 100$.

Anyone got other recommendations? In the same colors.

Looking for that retro clicky sound.

AmintaMister wrote: ↑Thu Apr 07, 2022 11:13 am

Karmeck wrote: ↑Thu Apr 07, 2022 11:12 am Well, if you don't have a hdd mounted, how is is going to boot in to anything?

Not, it IS mounted at startup...

Have you saved the setting after restart. So it is mounted at next boot?