MiSTer FPGA Forum

mrchrister wrote: ↑Sun Dec 31, 2023 10:13 pm

Try changing this in MiSTer_Sam.ini https://github.com/mrchrisster/MiSTer_S ... M.ini#L113

Doesnt seem to help. I tried 25 for displaywait and I still only get a shaky wallpaper (tried to change to default moving ants thingy too) I only get the sound.

I have an issue.

I dont get any commercial videos with SAM video. Only the sound. mister menu still shows and the background picture flickers when it plays. after its done, a corresponding game loads as expected,

hdmi
mister.ini settings is what sam set it to;
[menu]
video_mode=8
fb_terminal=1
fb_size=1

Ive done just this and used the mister core for bugtesting. (Fast loading is a bless) The mister is, if not perfect. As close as it gets to the real deal. Your program/game should work more or less indistinguishable to each other in both setups.

1920x1440p is actually a higher clock than the de 10 nano can handle (on paper). Set dvi_mode=1 gives you some extra bandwidth that might give the extra omph needed

2560x1440 (mode14) use less bandwidth die to horizontal pixel doubling. 2560x1440 is impossible as far as I can see on a de 10

Yes, try another cable

Most common issue is cable not good enough. Second problem seems to be wrong kind of led on i/o board.

Take small pliers, rip out pin 13. I've done this to a LOT of cables for Mister use

https://www.intel.com/content/www/us/en ... matic.html

Schematics if it helps

https://RMCRetro.com/mmsguidev2

Snac port.

I have several original psone controllers and I for sure have never seen any "mod" button.

Listing is for us only. Change "ship to" country and the stuff will show up.

Nice cases btw

What you are describing is wireless interference. A lot of stuff uses the 2.4 GHz band and the weakest of the bunch gets interruptions or disconnects. For example: my microwave Owen kills my 2.4 GHz wifi in the kitchen.

Look for Attract_Mode.ini in your scripts folder. Delete it.

There are connectors that you can use to connect the fan to a 2 pin contact included with retail version. If you have fan installed now you just cut off the wires and use that one. There's a instruction manual how to do it in the box with the fan. If you want it to look pretty you should use a solder pen and shrink tube.

You can just make a short micro to micro USB cable as I did

I've tested old white version, newer black and a third party all works flawless. I connect two controllers to one receiver without issues