MiSTer FPGA Forum

I just realized that it has to have the blue led on and not red.

simple solution - everythign works now .. sorry for the spam

I have the saturn 2.4ghz and the genesis 2.4ghz retrobit controllers and none of the buttons work - only the d-pad. Doesnt matter if I set it up in the main setting section or in each individual core. g.PNG s.PNG the odd part is that it registers the impression for A B C X Y Z as I am doing it , but once I leave the setup part it immediately goes b...

Found the solution. That physical sw3 toggle on the de10 was the cause of the problem. While researching online i came across a forum post that said you must toggle SW 3 in the direction away from the memory.. In order to enable VGA output physically. Turns out that's BS . So it took me weeks to figure out that maybe that guy was full of sh*t when ...

which are the recommended combined bluetooth and wifi dongles? ie 2 in 1 dongles This one works: https://aliexpress.com/item/1005003037645459.html I just bought this and the wifi part of this doesn't work on Mister (okay on Win10 PC), it's using a Realtek 8821CU according to the hardware ID. Can anyone confirm the Realtek chip in their 2 in 1? tha...

Could it be that the stock de10 nano power supply does not have enough juice to power it?

/media/fat/Scripts# udhcpc -i wlan0 -f -r 192.168.86.226 -F MiSter
udhcpc: started, v1.33.1
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending discover

Just keeps discovering forever unless you use -n or ctrl c to break out of it.

These commands failed too:
/media/fat/Scripts# ip link set wlan0 up

-- from this output it looks like it cannot get an ip from the dhcp "server"
/media/fat/Scripts# ifup wlan0
udhcpc: started, v1.33.1
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending discover
udhcpc: no lease, failing
Failed to bring up wlan0.

Hi I have a combo BT/WF5 device that is not working with the wifi script in the scripts directory. Says "Failed to bring up wlan0." -- the device shows up in linux /root# lsusb Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 0bda:c820 Real...

Pepeart wrote: ↑Mon May 16, 2022 3:10 am I have the 20L5, I am going to send you my file via PM

Thank you. Going to test it very soon. I'll report back.

Hi guys! I have a mister setup with an analog IO board, the nano of course , and the USB board with the USB power (not barrel connector) I have a sony PVM 14L5. - Connected Grey wire to H sync on the PVM ( i also tested the black wire, no luck) - toggled SW3 on the nano away from the expanded memory - updated mister.ini with: [MiSTer] key_menu_as_r...