MiSTer FPGA Forum

Faithful wrote: ↑Fri Dec 10, 2021 2:46 pm I wonder if could be a good idea connect the mister to the front speakers and the mt32-pi to the rear ones but only via analog.

For some games/setups it would probably work pretty good.
But when you only have two speakers clamped to your head it´s probably not a good solution

Yes i have now tried MT32 over the network. Fairly easy to get running and worked perfectly the first try i did on both AO486 and Amiga, i just followed the guide in the tread i linked. The only problem i have is that i use Toslink/optical as sound out on my mister into my headphone amp. So i have no way of mixing the regular sound and the MIDI tog...

Remember to unplug the SD-card and the usb bridge board that goes from the de-10 to the usbhub before doing anything with the case. There have been one or two here on the forum that has mangled a sd card and or the sd slot on the de-10! Other then that besides kick out all the cats and don´t sit on a long haired mat/rug when handling the de-10 :mrg...

SShhh! Don´t tell them! :mrgreen: As far as i know and i could be wrong. 1, No! 2, It has the same drawbacks as regular SNAC SNES gamepad will only work on SNES core, and genesis will only work on genesis core. 3, Only if there are a DB9 core for C-64/etc. 4, Yes as long as you have the correct NES to DB9 adapter board/cable and DB9 NES core the za...

OH MY GOD NOOOOOO!!!
Hope there is a way to turn it of/use a hacked bios without that annoying sound.

Looks like it is the same dongle for both the mouse and keyboard. So do you use the mouse at all? If not is it still connected but not in use? Where is the mouse? as in is it close or far away? Maybe it tries to connect now and then and causes the lag/freeze? Then having it closer could solve it. Does it gets pushed out of the way and maybe a butto...

It is not that cool to play with keyboards that you will freeze :mrgreen: What keyboard is it? A link would not hurt. Is it a cheap chinese keyboard or something like a logitech K400? For the cheap chinese i would not be surprised if it does not work very well when used much as in holding down keys for long, maybe the cpu in it simply gets overwhel...

A usb hub will absolutely NOT work, a manual switch with no electronics should work.
Discussed in this tread viewtopic.php?f=9&t=3598&hilit=switch

Then you have never used LLAPI at all. You can easily verify that if the LED between the HDMI port and the button is green then it is usb mode, if it is red then it is in LLAPI mode but you need to load a core with LLAPI turned on before it turns red. You can also try too unplug the userport/usb3 cable from the ioboard to the blisster and then turn...

Yes and no! You can use the BlisSTer in regular usb mode, as in not using LLAPI mode and not have the usb3(user port) cable connected to the BlisSTer. All usb and hdmi ports can be used in usb mode the hdmi ports shows red when LLAPI is used and green when usb mode is used. Practically turning it into a regular usb board but where the hdmi ports/Bl...

mister-mini6-128mb-fpga-computer.jpg You see the cut out for the sd card at the left bottom side at the back under what i assume is a white power button. From what i see you will probably have to use pencil or something to push the card in the last bit and when taking it out. Because the case it self plus the bottom piece do build out quite a bit ...

I´m guessing that a manual and mechanical usb switch could work. As in it has a real physical switch and NOT a simple push button and then the electronics do the switching. For example something like this would probably work. https://www.amazon.com/dp/B01I0Y3GEE Or this if usb3 ports are needed? https://www.amazon.com/dp/B077LKGZGZ But something li...

Blisster do need the LLAPI cores for using the LLAPI mode yes. BUT using a normal mister core then the USB ports on the blisster works the same way as with LLAPI cores, as in just like the official usb hub. And also when using normal mister cores the HDMI ports (that is the LLAPI ports) works too but without LLAPI it do works as just as a usb port ...

softtest9 wrote: ↑Wed Nov 03, 2021 1:24 am -The game device (Arcade, console, MiSTer, PC)
-Controller
-Your display
-The game itself (some games have several frames of input lag on real hardware)

-Your brain!
Everyone doesn´t have the same brain lag

Many off the "official hub" problems tread have turned out that they where "mister hubs" bought on aliexpress/ebay/etc. And there is likely a big chance that those hubs are not made 100% according to the official mister spec but often made with cheaper components. Also a big reason the hubs started having problem was when mister...

It´s obviously Winscp that was smart enough to protect you from moving big 3DO files to the mister which does not have a 3DO core

There is no longer any need to run small annoying fans to cool the MiSTer, Corsair has come to the rescue!

Ahh! Yes it was the rootfs i was looking at since i did think it was a separate partition on the sd card (had it in a computer 2-3 times in a year so) so no need for that since it is not a partition. And thanks for the -hBG/-h i´m pretty suire i did try -h but it did not show in G but now when i tried it did, maybe i did not try it but thought abou...

I swear the free space info wasn´t there that one time i checked :shock: the mister menu! :o But now when i look it´s there, anyone got any tips for thiiiiiiiiiiiiick glasses? I did add the linux partition to Flandango´s script and changed the storage space to show G instead of M (changed -hBM to-H). #!/bin/bash df -H /media/fat | grep -v Filesyste...

I was wondering how much space i have used since i have deleted some cd based games i will never play and added more then i deleted. And sat there for a while and scratched the smoldering sawdust collector :oops: and wonder how? I did not remember seeing any info in the mister gui or a script and took a look and nope! And i do not want to plug the ...

Some questions.
New or old sd card?
New or old mister setup on the sd card?
Free space on the sd card?

If new setup how did you set it up?
As in using the official mister or maybe mr fusion or something else?
What filesystem is on the sd card ntfs/fat32/exfat/ext/etc? (seen alot of problem with ntfs on this forum!)

You can set mister to what cores you want updated or you can set it so only one thing or more gets updated.
I do not use it myself so can´t say how good/bad it works and more info on how to in this tread viewtopic.php?f=27&t=3374

This was a very unclear and confusing post! With microusb got detached what do you mean by that? Is it the microusb port on the DE-10 nano board that has been ripped off or is it a usb cable that is damaged and/or lost? Mini OTG USB cable does not work on the DE-10 nano? NO it does not the DE-10 nano do have a MICRO usb NOT MINI usb. 200$ for a min...

But if you have no short term memory then would´nt one rom/game be enough

OTG hub not GTO (thats a Pontiac!).

I´m sad to say but don´t forget to eat and sleep

I run the script over SSH/putty and yep i did use small s in the scripts.
Changing to big S solved it!

Thanks Zakk.

he said that he never used the serial port but only regular USB to play the games. Totally not the reason for selling, nope not at all! i have never seen anything like that but the picture are way to bad to read anything on the boards so can not look for what it is there. So better pics or write down all the text on the boards. One thing you could...

Already in S cripts folder (a BIG S that is). Never had an scripts folder with a small s on the sd card since the restart, and i do not think that i had one before either. I did just think about i used my old mister.ini so checked that but has nothing about update_all in it (did not thinks o either). And NO no other ini files is used from the old i...

I recently started over on my SD card with a new install/update_all and so on. And i now have this error NEW CHANGE! As of 2021.07.17, Update All will now look for INI files stored in the same folder as update_all.sh Any INI files at /media/fat/scripts will be ignored. WARNING! /media/fat/scripts/update_all.ini will be ignored. /media/fat/Scripts/u...