MiSTer FPGA Forum

What would a custom board look like? Edge connector for console cartridge addons? Rear facing IO with PC style Stacked USB ports, built in high speed 32MB ram and expandable high capacity ram port. Duel Snac ports possibly DB-9? Built in Difficulty / Black and white, select and resest button breakouts for cases?

Consumer Daewoo late 90's - early 2000's flat pane CRT

Post your up close shadow masks pictures of your CRT So devs can get an accurate depiction of your CRT for future Shadow Mask filter developments. Post your TV brand / era .

I wouldn't mind a symbolics LM-2 with a Space Cadet keyboard. A sparc machine would be interesting. I don't know where the limit would be but possibly easier to have these RISC machines replicated on FPGA than the complex CISC platform like the AO486 core.

Yeah, I keep on setting default area to US and settings don't seem to save. Every time I load Streets of Rage 2 it says this games was designed for a different region and I have to switch the settings and reboot the core.

Well we can blame, Joe Biden and his inflationary budgets, the chip shortage and Drought in Taiwan, the rising popularity and mainstream attention brought to this project, the Federal reserve and over 1% compound monthly inflation. And the rising expenses of shipping containers, shipping and general logistics that is plaguing everyone. Seeing as In...

add 2600 support with an entirely new implementation Kitrinx I just did my Tapper test on my CRT with the new core and holy crap, you actually did it! Once video stabilizer is turned off my CRT plays tapper jitter free and everything is working just like on my actual hardware. This release is top notch and I can see the amount of love and attentio...

Games I have played and loved Metal Gear Solid Tony Hawk Pro Skater II Final Fantasy VIII Silent Bomber Twisted Metal series WWF games Raw / Smackdown Grand Tourismo Resident evil series Army Men series Spyro series Ape Escape Brave Fencer Musashi NFL Blitz Dead or Alive Tekken series Dance Dance Revolution Parappa the Rapper Mortal Kombat Trilogy...

This doesn't mean Jotego is moving on from the Sega System Arcade hardware does it? I wish for him to hit System 32. I can wait for any potential CPS3 or MK if it means I get Spider-Man the Video Game Arcade! I don't know I just know about the 2 MK based boards and CPS3 as shown in this post. Super scaler would be great but I don't know of any one...

Did Jotego say anything about the Wolf board? Since it uses the same CPU, it seems like a natural progression would be Y, T, and Wolf. X and Z are lower priority, and V Unit seems too powerful. Did not say that but I assume that it may be a priority after CPS3 is finished MK1 boards seem to be a priority right now. It definitely would make adding ...

So I got confirmation from Jotego that he intends to do both Y and T unit hardware for MK just don't know which one will be attempted first. So if you are a smash TV fan or NBA Jam fan there is much greatness ahead.

So far I have build a Daemonbite Arcade stick with real coin mech. I have build a Sega genesis 2 player, NES 2 player and a SNES 2 player adapter. I am very happy with all of the results. I basically cannibalized extension cables for my ports uses a multi-meter to figure out the pins and encased the project in electrical tape for cable strain and e...

Will this be the High impact / Smash TV Midway Y Unit or the MK / MK2 / NBA Jam Midway T unit hardware?

Glad you found something that works for you, but I’m surprised by this. I’ve had a Hori Fighting Commander for years and put dozens (hundreds?) of hours of fighting game gameplay into it and it still feels new. Ends up my go to for MiSTer because it’s super responsive and the d-pad and buttons all feel great. Yeah I guess it may be down to a bad b...

Hori Fighting Commander for ps3/ps4/pc is the best controller for me. Super versatile, has a home button, shoulder buttons and a solid d-pad. It's a wired controller which I still generally prefer when playing games Was going to get that but then saw reviews of it breaking within a month. That is why I went with the Daemonbite sega genesis adapter...

Possibly the RF encoding smooths over some problem then. In this case the vsync, vblank, are not ambiguous. There's a register and when it's set, they are on within a couple of pixel clocks. The hsync and hblank are very predictable and the whole system will break if they are off even the tiniest bit. I don't think it is the RF as the picture when...

It may be your television just not liking the odd signal from tapper, it's very close if not identical to 480i, where each field alternates between a full scanline and a half scanline when the vsync begins. Does real hardware do this with that game on that television? No real hardware on that same tv looks fine just with a softer image because it ...

Off isn't the right word. The video is perfectly accurate, especially if you turn off the stabilization feature. The problem is the console wasn't well designed, and the game code had to worry about the vertical video timings, so they do chaotic things. The stabilizer does it's best to understand the intent of the games and make them work on a mod...

Am I wrong could't a snac be done with a ADC hookup on the analog pins I would have made Mr.Spinner adapters as I made several Daemonbite adapters for various controllers. The Atari Joystick works with my Genesis Daemonbite adapter so no worries there. The main problem is that the Mr.Spinner adapter won't work with the atari paddles as they are you...

Two things unplug the whole Mister from the wall wait a minute and plug it back in. Do a RAM test also. See what it says. If the RAM is bad it might be the case where the other consoles work because their ROMs are too small to end up on a bad block but NEO GEO games are big and fill up some of the RAM chips entirely so if it is bad it will look lik...

I have the device wrapped up in electrical tape and it is so light falling will not damage it. While strain may be a problem if you have a long enough USB cable it won't matter as it will be resting on the floor and won't be strained. I am not worries and especially with the arcade board as it is enclosed in a box and protected.

Yeah that is so expensive, they were $5 when I got the Pro Micros however, anything from China will take months, like 6 months or more so patience or more money. Try ebay I found this https://www.ebay.com/itm/191457509365 And https://www.ebay.com/itm/284475378554 You can get cheaper ones shipped from china but I caution you at this time with govern...

Just remember there are tones of Playstation based Arcade boards so any work done can be used to work on porting these Arcade systems. Games like Tekken, Dance Dance Revolution, Dead or Alive and more!. Here is a list of said boards

http://www.system16.com/base.php#1

Bas wrote: ↑Fri Jul 30, 2021 5:09 pm Don't hold your breath too long.. an FPU will eat a lot of FPGA space for marginal returns in the area of gaming. I would love on to run old UNIX-like OS'es but that's really niche.

Well maybe a specialized fork where you strip down extra features to fit it like the 2 player gameboy or GBA cores could make this feasible.

No, this is for special graphics cards that have support for this. The IO board doesn't output chroma or luma signals needed for s-video and does not output composite as well. This adapter is made for the MiSTer in mind https://www.antoniovillena.es/store/product/vga-composite-s-video-adapter/ This is what you really should get if you want composi...

I would say a high res VGA monitor for CRT or a 1440p display as that has the most perfect integer scales from the various cores including 480p but said monitor needs to support the 4x3 resolution input. Some gaming monitors can and will do this pretty good.

No, this is for special graphics cards that have support for this. The IO board doesn't output chroma or luma signals needed for s-video and does not output composite as well. This adapter is made for the MiSTer in mind https://www.antoniovillena.es/store/product/vga-composite-s-video-adapter/ This is what you really should get if you want composit...

Starpath Supercharger Anyone working on converting this to the Atari 2600 Core I would wait for the new 2600 core to be released it is in development and was partially used for the new 7800 core. The current 2600 core is flawed and a better base is needed to build off of. Just wondering would you want to just load starpath games or would you want ...

is there any reason why we couldn't have 16:9 borders? If I'm not mistaken, these use the Super Gameboy functionality to display, so it's restricted to what the original hardware could show. I thought it just was able to extract the borders from the ROM like a Super Gameboy would. If it was a Super Gameboy the core would have some of the enhanceme...

is there any reason why we couldn't have 16:9 borders?