MiSTer FPGA Forum

may need to run update all script more then once. also i think it is telling you that inside silkwor.zip there is no file silkworm.1 not found in the zip. you, do not have the games on the sd card.

try hold B and connect usb to mister

i think just plugging in the controller uses the x-input mode (i may be wrong here) i think holding B set it to direct input. i dont think the controller has any more modes.(so when you press the button you get a mode that haven't been set by the controller firmware. that would my guess)

Xtro wrote: ↑Wed Jun 01, 2022 6:22 pm You can make this pad working with MiSTer if you keep pressed B button then connect to USB, but you need to do this each time you connect it.

i think that's the normal 8bitdo Pro 2 Wired USB and not for the 8bitdo Pro 2 Wired USB Xbox controller.

you cant switch it to header 2 in mister. you need a pc and then have python 3 installed on on the computer. then download the New Rising Sun's NES header database and put it in the same dir as the script and then put your Games there and then run the python script form the command prompt. or you can find games that are already made too have header...

Update_all or downloader

also remember that you always need to restart your controller after rest by powering it off and then on by start even if it says it is connected.

i have the old 8bitdo sn30 pro the old snes style and the newer 8bitdo sn30pro and they work for me in B-mode and X-mode.
it is just that you need to turn off the controller and on after you reset the system i the crs 4.0 too.
i use the firmware 2021-11-16 sn30pro v1,38 .
my mister ver is v220517 and os v220413.

would it be possible to add option to link the gameboy cores and the Super Game Boy system cores save folder to the same folder. since they have gameboys saves and super game boy saves in both.

if you have a hdd you my need to add the boot rom to your nes games hard drive

if the Bluetooth controller has official controller support then don't use a adaptor if they don't work in mister then may work with an adaptor like 8bitdo USB Adapter 2 but with more latency then out. My example is im using a 8bitdo N30 NS and it dosent work with mister but when i using it with 8bitdo USB Adapter 2 it can find the controller and i...

thank you

using 8bitdo pro2,sn30 pro,m30,lite,n30ns with usb2,retrobit megadrive,retrobit saturn.

you use the downloader.sh on the page it will download. and run the downloader.sh it will update to the latest ver 1.5 .
when you use it will say download 1.5 before press any key to continue.
if it dosent you can go in to /media/fat/Scripts/.config/downloader and delete the files in that folder (do this at your own risk !!)

then i would try to update your controller firmware (do it at your own risk) https://support.8bitdo.com/firmware-updater.html
and see if it helps

try remove the cable and then hold b and press start then plug in the cable.if you have a Bluetooth try connecting to it and see if you get the same result.

going back to post on viewtopic.php?t=4694
since it now more about the controller

is it the mr-fusion card image if not you try to download and use it.
is you version of mister Mister v220511, OS v220413

what update script did you use the update script or update all or downloader.also you my need to run the update script more then once.

i use my 8bitdo controllers in B-mode.but i dont have a sn30 pro+.
also try redo the controller. stick 1 test tilt rights is left stick and stick 2 test tilt rights is the left stick.
if it work you can use the left stick move up and down in the menu on the mister osd

you can try the mister input tester.
also all psx games dosent support the analog sticks. also it can be l3+r3+up/dn.
u set the analog sticks in main mister menu.
also you try pad test for ps1 https://www.psx-place.com/resources/padtest.396/

updated the post

heres my mt32-pi info if there is anything wrong with it. # ________ _______ __ # __ /_____ `. /____ `. /__` # ____ ____ __/ /____ _______) / ______) / ____ ______ __ # / __ v __ `./__ _____//_____ < / _____. /____// ___ `. / / # / / / / / / / /____ _______) // /______ / /____/ // .__ # /__/ /__/ /__/ \______//_________. /_________/ / ______. \____...

the nes version need to be in pal and NES 2.0 headers format
more help in this thread viewtopic.php?t=4575

my mt32-pi works and the menu has show up before so i know it and the menu works. and i have the latest version of mt32-pi software 11.3 r55. i have Mister v220413,x68000 v220214 and theres is no Mt32-pi menu on mister osd screen. i have tested Minimig v220326 heres is no Mt32-pi menu on mister osd screen. i have tested atari st v220413 heres is no...

i think the news just hasn't relesed the news for those cores. AtariLynx_MiSTer Release 20220417, Update Sys GBA_MiSTer Release 20220417, Update Sys, Organize OSD options WonderSwan_MiSTer 20220417 Update Sys, Optimize OSD you can go to mister-devel https://github.com/MiSTer-devel and go to the GBA_mister and there you can see files updated press t...

if you have python 3 on your computer you can try to use this tool to convert your roms to nes 2.0 header. script requires New Rising Sun's NES header database for the link on the page.
https://github.com/Kitrinx/NES_Header_Repair

Ring King not working (ROM or mapper issue?) viewtopic.php?t=2198

they my need to be in NES 2.0 headers format. here is info about help.
Some games aren't loading viewtopic.php?t=345
NES Boot Rom Issue viewtopic.php?t=3325

i checked the mister osd menu in sharp x68000 and amiga and it dosent show up.

sorry Dave i thought that you meant the LCD on mt32-pi i checked the mister osd menu in sharp x68000 and amiga and it dosent show up.

try config.txt and uncoment line avoid_warnings=2 at your own risk.
also update to mt32-pi v0.11.3 - 2022-04-13.


# Uncomment the following line to disable undervoltage/temperature warnings and throttling.
# WARNING: Possible instability; use at your own risk! Use a heatsink!
#avoid_warnings=2

try looking in your mt32-pi.cfg and at the LCD section there is different types lcd options hd44780_4bit, hd44780_i2c, sh1106_i2c, ssd1306_i2c.
there is also Set address (hexadecimal) of I2C LCD.