MiSTer FPGA Forum

I've corrected the simple mistake, I'd never noticed this and we have all seen it for years

Another build has been released by Srg320: SH2: -fix completion TAS memory cycles during reset (Virtua Cop demo freeze) -fix MAC instructions (Sega Touring Car Championship) VDP1: fix draw Normal sprite (Space Jam) VDP2: -fix Line Cell Scroll function in interlace mode (Grandia) -fix transparent for Sprite data SCSP: remove reset logic from memory ...

The fact you have individually soldered both 64MB chips onto the single chip memory board does seem to show they are faulty, as at one point sellers were producing 64MB memory modules on the single chip memory pcb boards, so I would have expected in your tests for at least one of the chips to work and not error if they were working correctly and ge...

You can select either 3.3v or 5v for the fan.

Depending upon who made your Digital IO board you may need to fit a pin header and use a jumper cap, or you could just solder a permanent bridge to allow the fan to run at the 3.3 voltage. If you flip the IO board over you will see the voltage values silkscreen marked next to the fan socket.

I think you will need to configure your .ini based upon the display type you are using. If you will are using Analog audio output (either mono amplified output through the JAMMA connector or stereo line level output through the RCA ports or 3.5mm headphone port), set SW0 on the DE10-Nano ON towards the center of the board to enable audio. SW1, SW2 ...

Sadly, with byuu/Near's passing, his original definitive article on the subject has been lost, but a lot of commentary around it can be found here: https://www.reddit.com/r/emulation/comments/7vjehj/fpgas_arent_magic_an_article_by_the_creator_of/ For those that wish to read byuu/Near's article, I've posted this archived version of the original her...

AmanoJacu wrote: ↑Thu Sep 14, 2023 5:32 pm
Can it at least be downloaded from elsewhere and manually installed?

https://github.com/furrtek/Arcade-TMNT_MiSTer

I have merged the other threads into this thread, please do not open new threads on the same topic, as pgimeno said bumping is preferable, thanks.

bazza_12 wrote: ↑Fri Sep 01, 2023 8:43 am
just a silly dumb question but is 128meg the limit for a single memory stick?

viewtopic.php?t=3440

These were confirmed working when posted by another user:

https://www.amazon.co.uk/dp/B08HXRQGXM

This might give you some more information, I agree the company producing these seem vague and non commital when trying to get specs about the panel, the youtube below shows a teardown with more details.

Find the specific cores corresponding GitHub, and post the issue for example Crazy Climber is here:

https://github.com/MiSTer-devel/Arcade- ... Ter/issues

Project cores are here:

https://github.com/MiSTer-devel

It could be one of many possible different internet connectivity issues either local or remote.

Quick reply is not available in this specific forum.

Clear your browser cache, this should resolve any issue.

This guide may not cover the PCXT, however it's very useful for setting up and using many of the MiSTer cores.

https://github.com/adreeve/MiSTerManual ... Manual.pdf

Many other dedicated websites / platforms exist specifically for buying and selling of items, these dedicated websites offer buyers and both sellers protection for transactions. Please use these specific websites thanks.

In stock and available again on the Digikey UK site:

https://www.digikey.co.uk/en/products/d ... 96/6817231

venice wrote: ↑Tue May 09, 2023 5:23 pm
Could you provide a picture/photo from your mod?

I don't think it's a modification, pins have just been correctly populated on the IO board.

I assume it was probably an AliExpress IO board with the missing header pins, as this seems to be a common issue with AliExpress IO boards.

Sergey Dvodnenko @srg320_ has posted an update for the Saturn core, details are as follows: saturn.jpg Progress update. CD: -rework cd drive interface (Main module) -add fifo logic for “Put sector data” command (Sega Ages Volume 1) -fixes for SH7034 CPU: -fix wait logic in SH7604 DIVU -fix reset in SH7604 peripheries VDP1: -fix draw end flag (World...

Another build has been released with the following changes:

3-4 player support
Pause implemented
Lethal Thunder Supported
Sample playback timing fixed.

https://github.com/wickerwaka/Arcade-Ir ... 230330.rbf

@wickerwaka has updated the M92 core today, more games are working including Ninja Baseball Batman.

Max-fpga wrote: ↑Wed Mar 29, 2023 6:13 pm
If I have understood correctly I can do the basic install/update all but run filters later to remove unwanted cores etc?

Yes, correct.

Max-fpga wrote: ↑Wed Mar 29, 2023 6:13 pm
And can someone explain briefly what the favourites script allows exactly and how it works on Mister - cannot find much on this?

MiSTer Favorites Script:
viewtopic.php?t=4470

The list of available filters and descriptions are here: https://github.com/MiSTer-devel/Distrib ... ME.md#list

Martin Donlon, has released the Irem M92 core he has been working on.

Irem M92 Github:

https://github.com/wickerwaka/Arcade-Ir ... n/releases

Twitter Announcement:

https://twitter.com/wickerwaka/status/1 ... 5918354432

Youtube Setup Guide:

https://www.youtube.com/watch?v=5YWl5WdZLWI

Grab one if you are looking to get into building a MiSTer and need a DE10-Nano board, I don't think they will last long:

Currently in stock:

https://www.digikey.com/en/products/det ... 96/6817231

https://www.digikey.co.uk/en/products/d ... 96/6817231

Pierco (Pierre Cornier) has been working on Freeze by Cinematronics, currently this core is still under development. https://www.arcade-museum.com/game_detail.php?game_id=7851 From Pierco's Twitter: https://twitter.com/pcornier/status/1639214134444040192/ Please if possible support the talented MiSTer developers: https://www.patreon.com/pierco Fre...

Yes I adjusted the .css it's a compomise but should be better now.

Yes the Cloud Connectivity Kit is fine to use as a source to get a DE10-Nano for building a MiSTer, as you point out you will also receive an additional board which is not required in a MiSTer build.

This is a 5.x IO board a user has upgraded:

viewtopic.php?p=35292#p35292

Information from Sorgelig posted on the old Atari MiSTer Forum:

https://www.atari-forum.com/viewtopic.p ... 4d#p368980

MiSTer FPGA Forum

Search found 466 matches

Re: Its been there for years, we've all seen it, but did we notice it ?

Re: Sega Saturn Core in Development

Re: 128MB v2.5 Very Strange Problem

Re: How to Control Fan Speed on Digital IO Board

Re: MiSTercade WGM2792 Monitor Issues

Re: The “Cycle Accurate” Conundrum and Is There a List of Cores That Are?

Re: TMNT Core is Gone?

Re: Warlords (Atari 1980)

Re: Are You Going to Re-Configure Your MiSTer Setup for Dual RAM?

Re: UK Available Direct Video Adapter

Re: Unico ULM26 26" 4:3 LCD

Re: Reporting Arcade Core Bugs?

Re: What Happened?

Re: What Happened?

Re: PCXT config: mount files/folders

Re: Is there a place in the forum to sell used stuff?

Re: Digikey Has DE10-Nano Boards in Stock Currently (13/05/2023)

Re: PSX SNAC Adapter

Well Nobody Saw This Coming! Nintendo 64 Core Announced

Re: Sega Saturn Core in Development

Re: Irem M92 Core Available

Re: Irem M92 Core Available

Re: DIY Folder Organisation Clean Up Unwanted Cores?

Re: DIY Folder Organisation Clean Up Unwanted Cores?

Irem M92 Core Available

Digikey Has DE10-Nano Boards in Stock Currently (13/05/2023)

Pierco is Working On Freeze by Cinematronics

Re: Prosilver Dark Notification Color

Re: Terasic Technologies P0685

Re: Can I Upgrade my 5.x Analog IO Board?