MiSTer FPGA Forum

Faithless wrote: ↑Sat Feb 20, 2021 2:39 am Hi everyone!

Recent Mister user and I'm having a blast with the x68000 core! Thanks Puu for the amazing work there!

Now I would like to give the PC98 a go. Problem is that I'm unable to unpack the qar file to generate the bios. Could someone please send me the mkbios script?

Thanks!

hello

Thank you for your new core : kc854_20210218

You wouldn't have two C64 directories, one in / media / fat / c64 and the other in / media / fat / Games / C64?

@Mr Puu

Thank's for the new version

Hi everyone, I enjoy the Mister like nothing else arround now, also the C64 games brings back good old memories for me :) I can load the disk games but not the cartridge games.. I see the gamelist and press A then I get a almost empty srcreen with some dots and only <dir> on it? Am I doing something wrong or do I miss something on my Image? Thank ...

breiztiger wrote: ↑Sun Feb 14, 2021 3:26 pm blue screen ... of death

https://www.cpc-power.com/index.php?pag ... l&num=9029

like you, blue screen

the_importer wrote: ↑Sat Feb 13, 2021 6:01 am I want to support this development, but he doesn't have a Patreon Alternative

https://www.patreon.com/srg320

Hello,

Thank you so much

I love all these machines from the Soviet bloc, they're often surprising.

Shmuppen wrote: ↑Sat Feb 06, 2021 4:21 pm For some reason that doesent work for me. Nothing happens when i "mount" the tape. It just stays at "press play on tape" screen. Got the latest core. What could be wrong?

are you using the kernal standard?

Shmuppen wrote: ↑Fri Feb 05, 2021 12:10 pm I dont get it to work.
I tried to load both TAP and T64.
When a tape is loaded I write load and get the "press play on tape". Then in the menu i choose Tape/play/pause and nothing happens.

what am I doing wrong?

1) load (on screen C64)
2) Via OSD menu, load your tapefile

that's all

Hello

A little test with an old version

without msu1
https://youtu.be/CtcXSOJO95I

with msu1
https://youtu.be/RoddIhHvrvI

2 will technically on some level reduce input lag by likely unnoticeable amounts if your monitor can take advantage of that, but it can increase the chance you will get display problems. The main advantage is the smooth scrolling, if your display doesn't have issues with it. I am afraid to change here vsync and it changes for everything else and n...

; Set to 1 for automatic HDMI VSync rate adjust to match original VSync. ; Set to 2 for low latency mode (single buffer). ; This option makes video butter smooth like on original emulated system. ; Adjusting is done by changing pixel clock. Not every display supports variable pixel clock. ; For proper adjusting and to reduce possible out of range p...

Now, out of the blue, 1941 and gunsmoke both are working without any issues, I didnt do anything. And I realize Mercs has the same problem as contra, just black screen. I will tru to run this ini settings and see if the ini file is generated. I have found this thread here, other person having same problem with the mister ini not generated https://...

Now, out of the blue, 1941 and gunsmoke both are working without any issues, I didnt do anything. And I realize Mercs has the same problem as contra, just black screen. I will tru to run this ini settings and see if the ini file is generated. I have found this thread here, other person having same problem with the mister ini not generated https://...

Thanks Mr Puu

Hello

If it was possible, it would be really great..

Thank you Mr Puu for the last release I will test Strange, this release version Zet98_20210116 wont boot, black screen and no OSD very like the first .rbf version. The Zet98_20210115.rbf works, can load dos6.2.D88 and the Ys_1.D88 loads but the grafics are glitched... Using this bios you attached on other post: https://www.swisstransfer.com/d/e566...

Thank you Mr Puu for the last release
I will test

Zet98_20210115

Thank you everyone for investigating the reason why it does not start. I uploaded the corrections for that part and other corrections. http://fpga8801.seesaa.net/archives/20210115-1.html The standard state is the following settings. DIP1-8 Extend DIP1-3 Normal DIP2-1 1 DIP2-2 Basic DIP2-3 80 DIP2-4 25 DIP2-5 Keep DIP2-6 Connect DIP2-7 Control DIP2...

I updated MiSTer to the latest version with update.sh earlier, and it became v210103, but it starts normally with the original binary. Just in case, I uploaded a replacement of sys with the latest template core. https://fpga8801.up.seesaa.net/rtl/release-Zet98MiSTer.rbf Hello, But why don't you have an issue with the latest version of Main MiSTer?...

puu wrote: ↑Sat Jan 09, 2021 2:04 am I uploaded the latest Template core compiled with Advanced Setting (Synth and Fitter) of Compiler Settings.
https://fpga8801.up.seesaa.net/image/Zet98_20210109.rbf

Hello Mr Puu

Same issue with the last release of your Core and the last release of the main MiSTer.
With MiSTer_20201027, no issue

That's very odd! I have tried again and I have put those 4 files back in the folder /media/fat/games/Zet98 and they worked! Sorry, I have no idea! Did you delete the /bootrom/Zet98.rom file? in addition, you must rebuild your boot.rom file from these files. It shouldn't work like this Ah! You were right! I kept bootrom/Zet98.rom file! That's why i...

Thanks! It worked like a charm! I did another test and it also worked by keeping the same name boot.rom and by putting the file in /media/fat/games/Zet98. Also I have tried the attached BIOS files which I put in /media/fat/games/Zet98 and also worked. But I am not an expert so I son't know if they are the correct ones. I have used them in retroarc...

I updated MiSTer to the latest version with update.sh earlier, and it became v210103, but it starts normally with the original binary. Just in case, I uploaded a replacement of sys with the latest template core. https://fpga8801.up.seesaa.net/rtl/release-Zet98MiSTer.rbf I have the same problem with this version and the last realese of main MiSTer,...

puu wrote: ↑Fri Jan 08, 2021 2:40 pm I updated MiSTer to the latest version with update.sh earlier, and it became v210103, but it starts normally with the original binary.
Just in case, I uploaded a replacement of sys with the latest template core.

https://fpga8801.up.seesaa.net/rtl/rele ... MiSTer.rbf

I will test

In /Games/Zet98 : boot.rom
in /bootrom : Zet98.rom

only one of them is required and it's better to have only one

Alkadian wrote: ↑Fri Jan 08, 2021 2:00 pm
Excellent, thanks for that! Could you please confirm the location for it?

I have placed it within the folder /media/fat/bootrom

but it didn't work.

Do we need a SDRAM file as well like for the x6800 core?

Thanks a lot!

you need to rename it Zet98.rom in this folder

A disk image file for testing :