MiSTer FPGA Forum

akeley

The Legacy: Realm of Terror is up for testing. I don't know this game but it seems to start up with 625K of conventional memory and a bunch of EMS configured on PCEm. Can't test on my MiSTer right now because my kid is hogging my TV... gaming.. so who am I to complain right? ;-) Thank you. Tried to run it but there's an error about EMS during boot...

akeley

Bas wrote: ↑Thu Nov 23, 2023 7:40 pm
In the mean time I'm also looking for games that are hard to get running in DOS. Things requiring strange drivers, memory management hacks and the like. The Ultimas turned out much simpler to package than I expected. So suggestions are welcome!

Microprose's The Legacy was always a tricky one, I think it requires a lot of conventional memory.

akeley

Scratching my own itch, so to say. ;-) Sure, sure, I know all about niche projects. Still, the Sierra pack is reasonably...contained, so to speak. Could save some time. I think I'm ok with my TDC based by-year collections, but will definitely grab all you (and whoever contributes later) can convert too. There's never too many ways to play DOS game...

akeley

There already is a Sierra games-only vhd on the archive.

akeley

The only "correct" answer here is "whichever feels better to you."

akeley

It's nearly 1K to buy a MiSTer :?: There's a huge amount of gamers that use CRTs and Arcade CABs with the MAME kit, so I absolutely think it should be integrated whenever possible. I'm not sure that number is really "huge", but in any case devs don't owe any obligation to anybody and also your correlation with MiSTer's sales, competition...

akeley

Yesterday I learned there was actually a micro controller/computer named miSTER before - miSTER Z80/ComPAN. Produced in Poland circa 1985, it started as an industrial real-time controller, but was also used to make microcomputers for office/scientific use. The name derives from Polish phrase "Mikro Sterownik" - meaning a micro controller....

akeley

I hear what you're saying: I'll assume the StarTech won't be the best but will be fine till I receive one of the purpose built solutions. It might be that for S-Video it will be just as good as the custom one from MisterAddons. I've only used VGA and SCART with my MiSTer Multisystem, not HDMI. These are the settings I use for VGA. These likely rem...

akeley

You're referring to RMC Retro here, akeley, the Custard? If so, I just rewatched their video, they say you don't have to change ANY settings in the .ini to use it with either composite or S-Video ... which implies that it does indeed do all the wizardy inside the box? Yes, that's the one I'm referring to. The issue is that to get proper composite ...

akeley

You're referring to RMC Retro here, akeley, the Custard? If so, I just rewatched their video, they say you don't have to change ANY settings in the .ini to use it with either composite or S-Video ... which implies that it does indeed do all the wizardy inside the box? Yes, that's the one I'm referring to. The issue is that to get proper composite ...

akeley

hm you may want to tag them they usually respond quickly. my understanding is the processing is done entirely in hardware (zero lag) and does not require special cores or software processing fwiw the manual states it should work with any core that supports 15khz. and you can still output via all other video connectors on board. seems like the answ...

akeley

I forgot about that adapter, but I'm not sure if this supports proper composite video (using the Y/C cores). I think I asked them about it once but had no reply. For S-Video it should be ok though.

akeley

So I'll have to switch to A/C within each individual core that I use? In which case I'll maybe need to have the MiSTer plugged into a HDMI monitor so I can see the screen? Not sure, I've never used it myself. But I think you just have to change from "rgb" to "svideo" in mister.ini, and the cores should auto-detect? vga_mode=rgb...

akeley

So generic VGA->S-video or SCART-S-video converters on eBay and Amazon aren't worth trying? No, they will either display 480i or have some awful artifacts/quality. There are some more highend models, like Axunworks, which might work well but am not 100% sure they are artifact free on MiSTer. Also bear in mind that not all cores support Y/C (though...

akeley

To use S-Video / Composite with MiSTer you will either need to make or buy a separate converter. Some info here, though it's not up to date - there might have been new sellers added since.

You can also check these threads for more info
viewtopic.php?t=5475
viewtopic.php?t=5875

akeley

Saturn core is work-in-progress, so I'm pretty sure the author had a reason to remove this functionality for now and it will most likely be back in later releases. Far as I know, adding CRT-adjust via some global "script" is impossible, it needs to be implemented on per-core basis and is not trivial (or it would have been done already a l...

akeley

PiMiga is a fairly popular ready-made Amiga distro for RPi, based on modern-look Amiga OS, and full of assorted bells and whistles, plus the usual set of demos/soft/games/modules/etc. The guy who made it (?) is porting it to MiSTer currently. I'm more of the old-school OS fan myself, but I know this kinda setup has quite a few fans, so if you're in...

akeley

The latter, try again.

akeley

Hi, does this runs also on consumer CRT? I can get a stable image using modelines from PC-88 (which in turn were borrowed from ao486) , but it's squashed - even after applying 16:9 ratio. On PC-88 it's the same, but this core has the Aspect Ratio: Full Screen option which helps to alleviate this problem. Try at your own risk: [Zet98] direct_video=...

akeley

Check this thread: https://www.misterfpga.org/viewtopic.php?t=6514

akeley

https://github.com/MiSTer-devel/Main_MiSTer/issues/538

akeley

I've checked up on this core. There seems to be a newer version (2022115) available for download here: https://www.patreon.com/posts/elan-enterprise-84254732 Apparently there was also another update this year: https://github.com/Kyp069/ep, which hasn't been ported to MiSTer yet though. Translated forum message (link in 1st post) from the dev says: ...

akeley

You should ask about it on this forum: https://www.cpcwiki.eu/forum/

There are some people there who know CPC hardware inside out.

akeley

2. Analogue 3D does not play copyrighted rom files, it plays legacy game cartridges via the cartridge slot

They will block flashcarts?

3. Analogue 3D is not designed using software emulation. It is designed using a specialty hardware chip called an FPGA, which operates on a transistor level implementation of its functionality.

akeley

Try this, sounds similar to a problem I had before: viewtopic.php?p=47187#p47187

akeley

I'd say Dualshock 4 v2 is hard to beat as an all rounder.

akeley

It's ao486, to start with ;) (the letter "o", not zero)

akeley

There is really no “one true” A1200 speed anyway. Of course there is - it's the speed of bare bones A1200. Any add ons people used later are completely different matter, just like it'd be with any other machine and subsequent MiSTer cores. That's not to say other features are not important, of course, but they don't have to be mutually exclusive.

akeley

Speed might not be the most important factor but it is still important. I'd like to be able to fire up A1200 and have it run at exactly the same speed as original hardware, just for the sake of it in the first place, but also for historical accuracy.

akeley

Ok I will try! So, in CRT TV 15khz hooked up via analog board VGA to scart and composite_sync=1 and vga_scaler=0, the two resolutions displayed on video info have to be always the same? I mean: if I'm in a NES game and the resolution (native resolution of the machine) showed in the first row of video info "popup" is 256×240px, I MUST hav...

MiSTer FPGA Forum

Search found 1315 matches

Re: Individually Bootable VHDs for Each Game

Re: Individually Bootable VHDs for Each Game

Re: Individually Bootable VHDs for Each Game

Re: Individually Bootable VHDs for Each Game

Re: N64 Core

Re: Why Remove CRT Adjust?

MiSTer's grandad namesake - miSTER z80

Re: Sanyo VMC-8615FP CCTV monitor with MiSTer Multisystem

Re: Sanyo VMC-8615FP CCTV monitor with MiSTer Multisystem

Re: Sanyo VMC-8615FP CCTV monitor with MiSTer Multisystem

Re: Sanyo VMC-8615FP CCTV monitor with MiSTer Multisystem

Re: Sanyo VMC-8615FP CCTV monitor with MiSTer Multisystem

Re: Sanyo VMC-8615FP CCTV monitor with MiSTer Multisystem

Re: Sanyo VMC-8615FP CCTV monitor with MiSTer Multisystem

Re: Sanyo VMC-8615FP CCTV monitor with MiSTer Multisystem

Re: Why Remove CRT Adjust?

PiMiga coming to MiSTer

Re: Elan Enterprise Core Release Candidate by RW FPGA-Dev Team

Re: PC98 Core

Re: Cannot Make PCXT Core Work

Re: Ability to Manually Save and Load Multiple Remap Files for Each Core

Re: Elan Enterprise Core Release Candidate by RW FPGA-Dev Team

Re: Using MiSTer Multisystem With Amstrad CM14 Monitor

Re: Analogue N64 Product

Re: Workbench HD Drive Don’t Work

Re: Best All-Round Controller

Re: Depricated.

Re: The “Cycle Accurate” Conundrum and Is There a List of Cores That Are?

Re: The “Cycle Accurate” Conundrum and Is There a List of Cores That Are?

Re: Video Info On CRT TV 15Khz