MiSTer FPGA Forum

venice

Just a note, i do these quick changes to the existing keyboard code to get more or less all keys and some combinations working. But I was informed that not all keys or key-combinations are working correctly. Please see my program as a POC. I don‘t know actually if I find the time to work on fixes. The details I got: A number of keys release when th...

venice

Control ist just a modfier, not a dedicated keystroke.
Restore is only working with Run/Stop together.

venice

I was wondering something. I use the MiSTer Super Attract Mode script a lot. It is a handy script to use at events as well. The thing is, the often long name of the currently playing game scrolls by very slowly, as the display only scrolls one character per second (the rate at which the script updates the display). It takes a long time to be able ...

venice

Here you can see how it looks with a "stacked" Levelshifter for SRQ Support.

Stack_Isolator.jpg

Platine_v1.2_w_SRQ.jpg

venice

Sounds similar to …

viewtopic.php?p=67043#p67043

venice

Could you provide a picture/photo from your mod?

venice

Weird
What has the μmt32π to do with the tty2tft device?

venice

Could you please post the type/brand and a picture of your ESP Board.

venice

... Where did you get that barrel to red and white wire adapter? Can i also use the barrel port on the esp to power it? Can i also use the usb c port to power it? ... Do you mean "barrel to red and black wire adapter"? It's self made. I am sure you can use the barrel port on the Trinity as well but I want the power connector externally. ...

venice

The Pins for the SD Card are actually defined in the Software.

See https://github.com/h3llb3nt/tty2rgbmatr ... ix.ino#L77

Connect the Data Pins, 3.3v and GND to your Reader.

venice

The software reads the Pin state and swaps the colors automatically if needed.
No need to touch the software.
And you can use the update functionality which you can‘t if you change the code manually.

venice

Let me see what i can do for you. //Edit Do the pictures help? The wiring of the display is straight forward. Insert the Trinity Board in the right Slot of the right Panel (seen from the front) and bridge both panels together with the included ribbon cable. Add Power (your part) to the Trinity Board and from the Trinity Board's green connector to b...

venice

This logo is shown by the display controller itself and it's used to see if the communication between the MCU and the Display is working.

If you like to remove the Startup Screen you need to modify the source code.
But then you can't use the Update Script for getting new FW Versions.

It's not configurable on MiSTer side.

venice

CartoonDonkey wrote: ↑Wed Mar 01, 2023 10:33 pm
Any way to hide the tty2oled logo before the Menu logo shows?

At boot time?

venice

New "Breakout" and "Full SMD" Versions with SRQ Support available. See: https://github.com/venice1200/MiSTer_SNAC2IEC/blob/main/README.md#updated-versions The Breakout Version v1.2 needs a second Levelshifter on top of the first one to support the SRQ Signal. Solder two small cables from the Pins LV5 and HV5 to one channel of th...

venice

Missus wrote: ↑Wed Mar 01, 2023 3:30 am
Search the forum for web2rgbmatrix!

..or tty2rgbmatrix.

venice

CartoonDonkey wrote: ↑Wed Mar 01, 2023 3:07 am
Hey all.. a few problems. Maybe someone can help.
I have another prebuilt tty2oled by way of: www.antoniovillena.es (an ESP8266)
Which seems to work when the attract mode kicks in…
…I only get text.

Oops.. fixed!

How do you fixed it?

venice

If you are using the stock IEC user port adapter as specified in C64 docs, and I am not mistaken, it does not connect PIN 1 of the IEC port (Serial Service Request) and I believe that is needed for fast serial. If what you are working with does, then please disregard. I have tested this with a modded SNAC2IEC Adapter today. See https://misterfpga....

venice

To test the new C128 Core and his Fast Serial Mode with a real 1571 Floppy (thanks to RealLarry), I stacked up my prototype SNAC2IEC Adapter with another level shifter to get the SRQ Signal from the SNAC/USB Connector to the IEC/DIN Connector. 3.3V, 5V and GND are passed through to the upper level shifter. SRQ2.png Here are the results of my tests ...

venice

I have sucessfully tested JiffyDos (bought it) with the C64 Core and a "Real" 1541-II Floppy.

venice

The latest Testing Version of the tty2oled Display Firmware got Support for the newer ESP32-S3 MCU. If you like to test this, enable " testing " for you. See: https://github.com/venice1200/MiSTer_tty2oled/wiki/Installation#testingoptional Used ESP32-S3 Pins: OLED_MOSI 1 OLED_MISO 45 OLED_SCLK 39 OLED_CS 18 OLED_DC 17 OLED_RESET 8 TILT_PIN...

venice

Could someone try my generic tty2x Script Daemon with this Display.
See: https://github.com/venice1200/MiSTer_tty2x

venice

Two new Pix available by pplatoon.
Super Pang & Atomic Runner Chelnov

We have now 741 Pix in stock including 99 alternatives.

Cheers

venice

yyhung317 wrote: ↑Mon Jan 09, 2023 6:46 am
..Is there any difference between v1.3 and v1.4..

The Pin connector P2 includes now VCC.
Itˋs easier to connect additional I2C or SPI Hardware.

venice

I got my snac2iec to work with a newer IEC cable and 1571 drive. My 1541-II and pi1541 would not work with any cables I have even though they work on a real C64. My IO board is v6.0 I bought on Etsy nearly 3 years ago so that could be the issue if snac specs were different back then? Did you run your tests with your 1541/1541-II only with one driv...

venice

daveo wrote: ↑Wed Jan 04, 2023 10:44 pm
Here's my current setup, with a custom case and monitor stand that I've been designing.

Looks really great
Can we have some pictures from inside and some more tech specs?

venice

Chinesium_Small.png I was informed by a SNAC2IEC user, who is using an Analog Board 6.0 from Ali Express, that no connected IEC devices are detected. While checking the hardware he used, we found that the connection pins needed for the SNAC port are not present on the analog board :o NoPins_Small.jpg If you are using hardware from China, make sure...

venice

Armitage wrote: ↑Wed Jan 04, 2023 9:15 pm
..I only tested it with a 1571 as well I think. I have the I/O board 6.1..

Successfully tested?

venice

Hi SNAC2IEC Users,
could you please report which Analog/Digital Board and Board Version and which IEC Device you have successfully used.

Many Thx

venice

Please measure the voltages when the adapter is connected to the MiSTER
between GND and LV and
between GND and HV at the Level-Shifter
without a connected drive.

Do you use a USB Male-Female Cable?
If yes, is it 1:1 and USB 3.0?

//Edit
Are you sure your IEC Cable works?

MiSTer FPGA Forum

Search found 741 matches

Re: C64 Original Keyboard on MiSTer

Re: C64 Original Keyboard on MiSTer

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Re: SNAC2IEC Adapter PCB (Connect Commodore Floppy to MiSTer)

Re: PSX SNAC Adapter

Re: PSX SNAC Adapter

Re: tty2tft Soft & Hardware Add-On (shows core based pictures and videos on a color TFT display)

Re: tty2tft Soft & Hardware Add-On (shows core based pictures and videos on a color TFT display)

Re: web2rgbmatrix

Re: tty2rgbmatrix

Re: web2rgbmatrix

Re: web2rgbmatrix

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Re: SNAC2IEC Adapter PCB (Connect Commodore Floppy to MiSTer)

Re: Driving HUB75E LED Matrixes

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Re: Commodore 128 for the MiSTer?

Re: SNAC2IEC Adapter PCB (Connect Commodore Floppy to MiSTer)

Re: SNAC2IEC Adapter PCB (Connect Commodore Floppy to MiSTer)

Re: tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)

Re: Round OLED Help (tty2pico)

Re: i2c2oled (little brother of tty2oled)

Re: RTC v1.4

Re: SNAC2IEC Adapter PCB (Connect Commodore Floppy to MiSTer)

Re: Show Us Your MiSTers

Re: SNAC2IEC Adapter PCB (Connect Commodore Floppy to MiSTer)

Re: SNAC2IEC Adapter PCB (Connect Commodore Floppy to MiSTer)

Re: SNAC2IEC Adapter PCB (Connect Commodore Floppy to MiSTer)

Re: SNAC2IEC Adapter PCB (Connect Commodore Floppy to MiSTer)