MiSTer FPGA Forum

twonunpackmule

I am not sure what I am doing wrong here, I have verified my Scope and Receiver work fine on my SNES. On the Mister I think I have tried every combination. My Receiver is plugged into the SNAC port through an adapter that I know works fine as SNES controllers work through it. I have setup the scope in the hardware config, assigned it to Joy 1 and ...

twonunpackmule

redsteakraw wrote: ↑Fri Feb 04, 2022 3:04 am I am hoping for Simpsons and X-men at some point and am donating to Furrtek's patreon. https://www.patreon.com/furrtek/posts I would recommend you do the same if you care about that core and Konami arcade cores.

Thank you for making me aware of this.

twonunpackmule

C-R-T wrote: ↑Fri Dec 03, 2021 7:28 pm
callanabrown wrote: ↑Fri Dec 03, 2021 5:57 pm
C-R-T wrote: ↑Sun Nov 28, 2021 9:34 am It works with direct video if you’re using a CRT. That’s how I use it.
The core is currently working with direct video to 15 khz TV? or 31 khz VGA?
15 KHz TV. But there are some flickery lines showing up.

I also noticed the image is horizontally shifted heavily to the right.

twonunpackmule

By the time this is ready, I will have my OG Arcade Cab completed by then. Which, isn't bad...just kinda funny. Hopefully, this will lead to TMNT in Time as that board is freaking expensive.

twonunpackmule

Might not be getting enough power to the controller? Might want to try a powered hub into the mix as well.

twonunpackmule

For those with large screen setups... https://www.amazon.com/dp/B00PW2CM1Q I've owned one of these forever. I also recommend the Dolphin Bar...but that's better used for PC emulation builds. Either way, that above one works quite well. That one looks a lot like the one that came with my wii (got it used) and I never could get it dialed in right. N...

twonunpackmule

For those with large screen setups...

https://www.amazon.com/dp/B00PW2CM1Q

I've owned one of these forever. I also recommend the Dolphin Bar...but that's better used for PC emulation builds. Either way, that above one works quite well.

twonunpackmule

Captain FPGA wrote: ↑Thu Oct 14, 2021 1:20 pm
darksakul wrote: ↑Wed Oct 13, 2021 6:14 pm I was going to ignore this thread, but I got notification of a reply.
It's just a person projecting their world view onto others. Typical internet.

twonunpackmule

Captain FPGA wrote: ↑Fri Aug 20, 2021 11:01 am Also has anyone found a fix to the Duke Nukem crashing issue?

I'm just shocked I can actually play it now. I cannot play Atomic Edition. That still crashes and seems to not run well. However, the OG release of the first three episodes, runs rather well. I haven't played much of it, but it actually runs.

twonunpackmule

Looks amazing. I know lots of people use Twitter, but if you could also provide a method on which to be kept in the loop without Twitter... that would be great. I've been trying to convince myself on buying another MiSTer setup for a BVM I'm currently working on. So, this is definitely something of interest. The design lends itself more to being &q...

twonunpackmule

So, I got the 8bito 2.4ghz NES Controllers in the other day. They work wonderfully via SNAC. I'm still waiting for the Daemonbyte adapters to show back up for sale (I'd make my own...but I like the housing he provides.) to just use them all via USB Fast Polling. As I do primarily just use the SNAC for Gun Games.

twonunpackmule

I am having the same issues since the update; Menu loads wrong & my save states are frozen upon loading. It was working incredibly well & I was seriously enjoying this play through. If this is just a bios issue how can I fix it? I'm not trying to be rude...but I don't think many will help with the search for getting an Official Bios. I rec...

twonunpackmule

It's definitely finicky. With the NES core, I've only been able to get one of my zappers to work and NES Advantage stick. None of the 5 OG controllers will work correctly on it. As for SNES, I haven't had much issue outside of getting the Super Scope to work. I went through three receivers and two Scopes before I got a working combo. As for control...

twonunpackmule

ItalianGrandma wrote: ↑Fri May 28, 2021 2:15 pm I don’t have SNAC, but I do have this controller and a Daemonbite adapter. I’ll give this game a try later and see if I get any weird results.

Thanks! Seriously, it's been only this game where the controller acts oddly.

twonunpackmule

Hello So, I noticed an issue that only occurs in this one title (out of the many I've played) where the game just glitches out using the M30 (Genesis DB9) via Snac. It basically goes into rapid fire without pressing a button and the button layout is all wrong. When I disable 6 button mode using the controller, it's fine...but that's not ideal for t...

twonunpackmule

Anyone have any recommend settings for Duke Nukem 3D? I've been having some terrible frame rates and then it usually crashes. Much like the game "Quake", "Duke Nukem 3D", needs a faster CPU/FPU, and any game that runs slow in the "eXoFlynn Top 300 DOS Pack" also needs a faster CPU/FPU, games like that will not be play...

twonunpackmule

Anyone have any recommend settings for Duke Nukem 3D? I've been having some terrible frame rates and then it usually crashes.

twonunpackmule

chris wrote: ↑Mon Feb 01, 2021 11:25 pm Virtual Boy would be pretty cool. I love rallying around things with the community every time something new is released, so honestly, I'll be happy with anything that's released.

I would love for it to also support 3D output. I still have a 3D Plasma and that would be a great combo.

twonunpackmule

i wanna say that hack uses MSU-1, which the SD2SNES supports, but not the MiSTer (yet) https://brutalmario.fandom.com/wiki/Brutal_Mario/Super_Kitiku_Mario_Downloads_Page you could try to download one of the version 7 and under demos that may/may not use MSU-1 Thank you for your response. I do have the standard Version 7 up and working. The only on...

twonunpackmule

I don't want to fill the board with odd questions about rom hacks. I don't request/suspect anyone to fix it, as it's non-important. So, I figured I just add to this. Since my question is about a Mario World hack. Anyway, I'm trying to get Super Kitiku (Brutal) Mario: Part 1 working. It's the Fan Completed version of Brutal Mario. This version does ...

twonunpackmule

metalfacemark wrote: ↑Wed Apr 28, 2021 10:12 am I managed to order one a few days ago from aliexpress, it was literally the only place i could find them.

8bitdo said more are coming. So, I'm not surprised they showed up there first. I do think we will see a new supply at Amazon and so on soon.

I'm buying two...when I can.

twonunpackmule

This is amazing!!!

twonunpackmule

I was able to help someone on the MiSTer Discord get it working. It doesn't work because of some SRAM issue but someone made a patch for that: https://krikzz.com/forum/index.php?topic=395.0 The SRAM patch is not directly available to download from the OP but the second post in that thread is by Drakon and he mentions combining the patch with his R...

twonunpackmule

*update*

I have three receivers for the Super Scope. So, I plugged in and tried a different one and it works perfectly.

twonunpackmule

https://misterfpga.co.uk/product/mister ... -adapters/

Using this, I’ve gotten it to work...sort of. Currently, the fire button is mapped to the cursor button. No other button seems to register. But, you can fire at the screen and it’s recognized.

You have to “swap joysticks” for the SNAC to map to P2.

twonunpackmule

Oh, I’ll def try that out when I get a chance. I was able to get the Menacer finally recognized the other day. Man, is that gun garbage. Hahaha!

twonunpackmule

I was able to get the Lightgun working again by going back to a previous Core Build.

Core I had to roll back to was 20200620.

twonunpackmule

Last week I had Light Guns working over SNAC for Sega CD. However, I tried the other day, after updating, and the lightguns no longer work. Hopefully, maybe, someone can help me identify the issue? I was able to play Snatcher last week with both an M30 USB and a SNAC connected Justifier. Today, I can't even play Lethal Enforcers. I didn't want to s...

MiSTer FPGA Forum

Search found 58 matches

Re: Anyone tried a Nintendo Super Scope 6 ?

Re: Aliens Core (1990)

Re: So can we use the IO board's analog out or not?

Re: TMNT is Getting Closer to Run on MiSTer

Re: SNAC not working properly when using extension cord with PCE Controller

Re: Light Gun

Re: Light Gun

Re: Neo Geo CD

Re: eXoFlynn Top 300 DOS Pack Updates and Support

Re: MiSTer Multisystem - All-in-One System

Re: SNAC issue with NES core

Re: Trouble with The Minish Cap?

Re: SNAC issue with NES core

Re: Issues with M30 (Genesis 2.4ghz using SNAC) playing Xenocrisis

Issues with M30 (Genesis 2.4ghz using SNAC) playing Xenocrisis

Re: eXoFlynn Top 300 DOS Pack Updates and Support

Re: eXoFlynn Top 300 DOS Pack Updates and Support

Re: What new console, handheld or arcade core do you think will be released in 2021?

Re: Super Mario World Hacks

Re: Super Mario World Hacks

Re: Whats up with the "8Bitdo SN30 2.4G Wireless Gamepad for Original SNES" being out of stock

Re: Early prototype of MiSTer FPGA NES core Savestates

Re: SMB3: Super Mario Adventure romhack not running?

Re: Anyone tried a Nintendo Super Scope 6 ?

Re: Anyone tried a Nintendo Super Scope 6 ?

Re: SNAC Light Gun

Re: SNAC Light Gun

Re: SNAC Light Gun