MiSTer FPGA Forum

kathleen

Sorry for the off, but I ask: is it possible that this adapter: https://www.aliexpress.com/item/4000680055332.html work in MiSTer? I am looking for a joystick like the Sega Genesis or Famicom clones to work on the system and allow me to map the buttons on each core. I know there are options like SNAC or DIY something with Arduino, but I just have ...

kathleen

for future: USB -> LPT for connecting real OPL devices (OPL3LPT) (even older printers) does it makes sense? You mean an external adaptor like this ? https://www.amazon.co.uk/dp/B00EXK9CWU/ If yes, I guess that firstly it will have to be recognized by Linux right ? @spark2k06, Don't know if this could be doable, but a snac2ide would be amazing. Lik...

kathleen

Two of my wishes that I have listed are on the way, the PC-XT and the Commodore 128. I cross my finger to see one day my third wish, the Atari Falcon.
We should maybe fill a shared spreadsheet and strikethrough what has been fulfilled.

kathleen

I received my SNAC2IEC built this week-end, this is really an amazing device. I've tested it with a real floppy and it works like a charm, next step will be to test with the SD2IEC device and also by using 2 devices to see if this works or not. But I'm already happy to see my real floppy drive connected to the Mister and got it working like on real...

kathleen

Thank you @eriks5, this is a great news that I was waiting for since a while.
The C128 has more than its place here.

kathleen

Yes, you're right, Rayman is a bit too know to fit here mickeys wild adv too i think.

I've just thought about a game that I liked and finished, is is "D" and adventure game in 3 CD's. Maybe less known this one.

kathleen

Here are my today's results. 1st try on my Tandy 1000. As you can see I set the speed to LOW which corresponds to 4.77Mhz. The output is CGA (on a LCD monitor thanks to the interface MCE2VGA (https://www.serdashop.com/MCE2VGA). 20220513_144832.jpg Then I run the small basic program and.... it last 11 sec 31. 20220513_145958.jpg Then I changed the s...

kathleen

spark2k06 wrote: ↑Thu May 12, 2022 7:19 pm

However, what I find strange is that I'm getting 11s at both 4.77Mhz and 7.16Mhz, it's throwing me off.
Agree, this is weird. I'll test at both frequencies, but I'm pretty sure that the time will be reduced

kathleen

It takes the same time at 4.77Mhz as it does at 7.16Mhz, how strange this is, I wonder how long this sequence of code will take in IBM BASIC on a real PCXT: Chrono.jpg I own a Tandy 1000 (4.77mhz/7.16Mhz as well) I can try this loop on it tomorrow evening and let you know how long it last to get it completed. I also have a µ8088-XT (https://github...

kathleen

Klonoa
Rayman
Mikey's wild adventure

kathleen

Alex Ztiah wrote: ↑Sun May 08, 2022 8:39 am I tried to run the last available build but I don't know how to name the folder under "Games".
Tried it with GnW, just like the core, but no luck.
Maybe someone figured this out or I just overlooked/overread it?
Thanks to all and best regards, Alex

I do have : GameAndWatch as folder for this core and it works

kathleen

From 859 demos I found 79 broken, meaning incompatible, won't run from harddisk or won't run at all. And this is where you can help ! I could "repair" some demos by replacing them from another source, but if you find other/working system settings or a working copy of the demo, feel free to contact me so we can complete this demo set to i...

kathleen

FoxbatStargazer wrote: ↑Wed Apr 27, 2022 1:07 pm Hard to see real laserdisc emulation happening when we can't even get CD support.

Hahaha yes, good point ! At least for the other tracks than the 1st one

kathleen

@FPGA64, Thanks for this clarification. However some LD were converted to DVD video format especially for Daphne and/or Winuae. When I said ISO I'm sorry to haven't more detailed my thought, I was meaning those kinds of DVD videos which are existing for the above listed games. (for instance : Mad Dog McCree / https://www.emuline.org/topic/1307-arca...

kathleen

Thanks for your answer @shertz,
Actually I was more thinking to use like for the ISO's, the disk image of the games (which are findable on the web) instead of using a third party device like the RPI

kathleen

Hello everyone, I've just discovered thanks to a French Amiga forum (AmigaFrance.com) that Winuae, the well known Amiga emulator has the capability of running American Laser Games. The arcade cabinet was using an Amiga 500 to control the games/videos :D ... I'm wondering if this feature could this be implemented to the Mister ? There is a small lis...

kathleen

I've tried Next186 with no luck (I'm using the VGA out) is anyone knows if this core works with the VGA output ? Or does it work only with HDMI out ?
Thanks.

kathleen

hernan43 wrote: ↑Wed Apr 20, 2022 4:01 pm
Wondering what people would think.

Hahaha, 1st of all, thanks to your post, I'm now force to buy this printer

. I felt in love when I saw it, it's so cute that I'm going to order one !!!

Your idea is not bad at all, would be nice to get it interfaced with the Mister but as AngelicLiver says, few chances that anyone work on it. Let's see.

kathleen

Hi. I'm fine. The Russian occupiers have turned off our Internet and mobile communications. There is a slow Internet connection, but this one is not always available. Twitter and Facebook are blocked, so I'm writing here. I'm working on Saturn and other cores. Maybe not so fast, but I continue to work. Thank you all for support. I sent you a lot o...

kathleen

Heecules is a better fit for the upcoming 186 core. It already has a proper CGA implementation, at least: https://misterfpga.org/viewtopic.php?t=3682&start=90 Agree, it makes much more sense to have the Hercules/MDA/CGA/TGA on a 8088 till 80286 core. I've been hoping also since a while to have the Hercules card on AO486 but before I knew that ...

kathleen

This is a very good news thanks @Xbytez,

@bazza_12, to me you'll not need to buy an Amiga FDD, it should work with a PC drive (like with Winuae) which is still findable at low price

kathleen

It seems that this demo is not ADF compatible. It uses >80 tracks
So far only physical disks work.
Need to wait maybe an IPF of it but will not work anyway with the Minimig core.

kathleen

Glad to see that this core is moving forward ! Thank you @spark2k06

kathleen

I'd like to thank you, @bnz99 I've received the PCB today. Cannot wait to get it assembled by my friend in order to use it on my Mister.
Thank again !

kathleen

@sharklodon, Thank you for reminding that there is an IBM PS/1 emulator under Windows. I remember having tried to use it there a while ago but w/o great success. It seems that now the emulator has reached a pretty good level. Cannot wait to try it. I'd also like to see it on the Mister, I've been dreaming since a while of having a XT-8088 to an AT ...

kathleen

Hi @bnz99
I from EU (Belgium to be precise) and I'd be interested by one card if any available.
No need to get the components soldered, my friend is electronic engineer so he'll do the job for me.
You can PM me to finalize the deal.
Thank you so much in advance.

kathleen

AO486 is way to fast/complex for PCJr/Tandy 1000 stuff. Also most games made for the original 4.77mhz Intel 8088 were quite speed sensitive and don't take too well to different timings. In terms of features, I think a less is more aproach would probably be best at first. Work on getting compatibility with PCJr stuff done, then move on to Tandy, th...

kathleen

as dan wood asked at the end of his unboxing/review.. who is the mini a500 aimed at? maybe not the retro gamer, or the retro enthusiast.. maybe just someone who casually walks into a store, sees the mini and hasn't thought about the amiga for 30 years, buys one cos they remember sensible soccer or speedball from the early 90's. I'll be sticking wi...

kathleen

Agree @t9999clint, PCjr & Tandy 1000 are quite close. I do have a Tandy 1000HX (with the 640kb ram ext.) I'm also willing to give my support if some tests are needed to be done on real hardware. If this can help I'd be glad to participate as well. Unfortunately, so far, there is not such a core in the pipe. Let's cross our fingers that this hap...

kathleen

@pepito,

This should yelp you to proceed : viewtopic.php?p=1007#p1007

MiSTer FPGA Forum

Search found 414 matches

Re: RS-232 (9 pin) serial mouse connection to MiSTer running ao486

Re: MiSTer PCXT

Re: Wishlist of Cores You Would Like to See in the Future

Re: SNAC2IEC Adapter PCB (Connect Commodore Floppy to MiSTer)

Re: Commodore 128 for the MiSTer?

Re: So What PSX Game Should I Play On My First Try of the Core?

Re: MiSTer PCXT

Re: MiSTer PCXT

Re: MiSTer PCXT

Re: So What PSX Game Should I Play On My First Try of the Core?

Re: Game & Watch Core

Re: Demos - Ready-To-Run VHDs

Re: ALG (American Laser Games)

Re: ALG (American Laser Games)

Re: ALG (American Laser Games)

ALG (American Laser Games)

Re: Next186 MiSTer Core Progress

Re: Gameboy Printer

Re: Sega Saturn Core in Development

Re: monochrome monitor mode (green, amber, white) in ao486 core

Re: Real Floppy Disk Drive for MiSTer FPGA Current Progress

Re: Transhuman Demo

Re: A Real PC XT Core Perhaps?

Re: [GUIDE] Direct MIDI IO for ST and Amiga Cores

Re: Core Request: IBM PS/1

Re: [GUIDE] Direct MIDI IO for ST and Amiga Cores

Re: IBM PCJr Core

Re: A500 Mini's CD32 controller?

Re: IBM PCJr Core

Re: 8Go VHD image