ao486 Drivers

User avatar
Kreeblah
Posts: 39
Joined: Sun May 24, 2020 7:06 pm
Location: Seattle-ish
Been thanked: 2 times

ao486 Drivers

Unread post by Kreeblah »

To help folks with getting started with this core, I was thinking it'd be good to have a place where people can find drivers for it.

Mouse drivers: Microsoft drivers (DOS driver and Windows 3.1 utilities) CuteMouse (alternate DOS driver)

Sound drivers (Sound Blaster 2.0): DOS and Windows 3.1

ET4000 Video BIOS (for upcoming ao486 release): Here
UniVBE 4.0 (for upcoming ao486 release, requires the above ET4000 BIOS): DOS utility for VESA BIOS Extensions
Video Drivers (Tseng ET4000) (for upcoming ao486 release, requires the above ET4000 BIOS): Windows 3.1 Windows 95 Windows 95 Disk Image

Modem driver: Windows 95 (use it as a null modem cable)

TCP/IP stack (Trumpet Winsock): Windows 3.1 (registration page is here; this version is 3.0, not 5.0, as 3.0d is the last version that works with Windows 3.1)

HIMEM.SYS/EMM386.EXE replacements from Win98SE (to work around bugs in these in MS-DOS 6.22): HIMEM.SYS EMM386.EXE

Open-source HIMEM.SYS replacement: HimemX

HIMEM.SYS/EMM386.EXE replacements from PC-DOS 7.1 (potential work-around for bugs in these in MS-DOS 6.22, untested to see whether they fix the issue, though): HIMEM.SYS EMM386.EXE
User avatar
Sorgelig
Site Admin
Posts: 877
Joined: Thu May 21, 2020 9:49 pm
Has thanked: 2 times
Been thanked: 211 times

Re: ao486 Drivers

Unread post by Sorgelig »

Not sure about Windows 3.1, but for DOS you just need to add SET BLASTER= setting in autoexec.bat
User avatar
Kreeblah
Posts: 39
Joined: Sun May 24, 2020 7:06 pm
Location: Seattle-ish
Been thanked: 2 times

Re: ao486 Drivers

Unread post by Kreeblah »

You do need a driver for Windows 3.1. It doesn't support any sound cards without vendor drivers.

The only Windows 3.1 driver packages Creative Labs ever released for their cards also bundle some DOS utilities with them and take care of autoexec.bat modifications as part of the installation.
lechuck333
Posts: 5
Joined: Sun May 24, 2020 11:24 pm

Re: ao486 Drivers

Unread post by lechuck333 »

I played DOS games as a kid, but I haven't touched DOS in 25 years, so I really don't know what I'm doing here. I've installed the drivers, but I have no clue how to actually use sound in the games. I pulled up Wolfenstein 3D, and only get sound effects. Is there some MISTer setting I need to change?
QuillOmega0
Posts: 3
Joined: Mon May 25, 2020 12:57 am

Re: ao486 Drivers

Unread post by QuillOmega0 »

Kreeblah wrote: Sun May 24, 2020 10:59 pm You do need a driver for Windows 3.1. It doesn't support any sound cards without vendor drivers.

The only Windows 3.1 driver packages Creative Labs ever released for their cards also bundle some DOS utilities with them and take care of autoexec.bat modifications as part of the installation.
Entirely true, at least for WfWG 3.11, got that sound working for the Sound Blaster 1.5 just fine on it. But that's definitely not the correct version
User avatar
Newsdee
Top Contributor
Posts: 830
Joined: Mon May 25, 2020 1:07 am
Has thanked: 98 times
Been thanked: 209 times

Re: ao486 Drivers

Unread post by Newsdee »

What is a good mouse driver for the core?
User avatar
Kreeblah
Posts: 39
Joined: Sun May 24, 2020 7:06 pm
Location: Seattle-ish
Been thanked: 2 times

Re: ao486 Drivers

Unread post by Kreeblah »

QuillOmega0 wrote: Mon May 25, 2020 1:01 am
Kreeblah wrote: Sun May 24, 2020 10:59 pm You do need a driver for Windows 3.1. It doesn't support any sound cards without vendor drivers.

The only Windows 3.1 driver packages Creative Labs ever released for their cards also bundle some DOS utilities with them and take care of autoexec.bat modifications as part of the installation.
Entirely true, at least for WfWG 3.11, got that sound working for the Sound Blaster 1.5 just fine on it. But that's definitely not the correct version
You're absolutely right. I grabbed the wrong link from my list. I just corrected it (whenever my edit is approved by the moderators).
Newsdee wrote: Mon May 25, 2020 1:11 am What is a good mouse driver for the core?
I added a link to the Microsoft drivers, which is what I'm using.

One caveat to this, though. If you already installed the sound drivers, you might need to copy the mouse driver installation files to your hard drive before running Windows. There's currently a bug which causes the core to lock up if it access the floppy drive after it's used the sound card for something (which Windows does for its startup sound).
death5126
Posts: 4
Joined: Mon May 25, 2020 4:35 am

Re: ao486 Drivers

Unread post by death5126 »

all drivers for a SoundBlaster 2.0 should work well
there are some 6 and 8 disk driver sets with dos 6.22 and windows 3.11 drivers
drivers can still be obtanide from the soundblaster web site
windows 95c has a built in driver for the sound card that also works.
suverman
Posts: 84
Joined: Mon May 25, 2020 1:17 am
Has thanked: 42 times
Been thanked: 6 times

Re: ao486 Drivers

Unread post by suverman »

Newsdee wrote: Mon May 25, 2020 1:11 am What is a good mouse driver for the core?
ctmouse.exe works for me.
User avatar
NightShadowPT
Posts: 208
Joined: Mon May 25, 2020 9:56 am
Has thanked: 5 times
Been thanked: 9 times

Re: ao486 Drivers

Unread post by NightShadowPT »

Newsdee wrote: Mon May 25, 2020 1:11 am What is a good mouse driver for the core?
ctmouse.exe (also known as Cute Mouse) is probably the best option as it has a small footprint in memory.

Cheers
User avatar
tontonkaloun
Posts: 354
Joined: Sun May 24, 2020 7:38 pm
Has thanked: 152 times
Been thanked: 51 times

Re: ao486 Drivers

Unread post by tontonkaloun »

I am looking for a univbe driver compatible with the core, I have not found. It may not be possible ...
User avatar
NegSol
Posts: 49
Joined: Mon May 25, 2020 4:34 pm
Has thanked: 31 times
Been thanked: 5 times

Re: ao486 Drivers

Unread post by NegSol »

tontonkaloun wrote: Sat Jun 13, 2020 1:28 pm I am looking for a univbe driver compatible with the core, I have not found. It may not be possible ...
Not possible as far as I know. ao486 is not vesa compatible (at least not supporting any SVGA resolution) - So until SVGA is added you will not find anything compatible. :cry:
User avatar
tontonkaloun
Posts: 354
Joined: Sun May 24, 2020 7:38 pm
Has thanked: 152 times
Been thanked: 51 times

Re: ao486 Drivers

Unread post by tontonkaloun »

cutmouse occasionally causes an error "mouse reset returned 08 (should be ack)"
Have you had this problem?
suverman
Posts: 84
Joined: Mon May 25, 2020 1:17 am
Has thanked: 42 times
Been thanked: 6 times

Re: ao486 Drivers

Unread post by suverman »

tontonkaloun wrote: Mon Jun 15, 2020 4:53 pm cutmouse occasionally causes an error "mouse reset returned 08 (should be ack)"
Have you had this problem?
Yeah, just dont touch the mouse when the core is booting up till you get to the command prompt. That always triggers the error.
User avatar
tontonkaloun
Posts: 354
Joined: Sun May 24, 2020 7:38 pm
Has thanked: 152 times
Been thanked: 51 times

Re: ao486 Drivers

Unread post by tontonkaloun »

I had thought about it ! but i don't touch it !
User avatar
tontonkaloun
Posts: 354
Joined: Sun May 24, 2020 7:38 pm
Has thanked: 152 times
Been thanked: 51 times

Re: ao486 Drivers

Unread post by tontonkaloun »

suverman wrote: Tue Jun 16, 2020 2:55 am
tontonkaloun wrote: Mon Jun 15, 2020 4:53 pm cutmouse occasionally causes an error "mouse reset returned 08 (should be ack)"
Have you had this problem?
Yeah, just dont touch the mouse when the core is booting up till you get to the command prompt. That always triggers the error.
you were right
I had to touch it without realizing it
User avatar
Caldor
Top Contributor
Posts: 930
Joined: Sat Jul 25, 2020 11:20 am
Has thanked: 112 times
Been thanked: 111 times

Re: ao486 Drivers

Unread post by Caldor »

tontonkaloun wrote: Sat Jun 13, 2020 1:28 pm I am looking for a univbe driver compatible with the core, I have not found. It may not be possible ...
If you are using one of the beta cores, Cache24 or newer, it should work, but you also need to replace the bios file boot1.rom with the ET4000 bios linked in the opening post to get the newer cores running with VESA, otherwise Univbe will see the bios you are using, the currently released one being a standard VGA bios.
User avatar
Caldor
Top Contributor
Posts: 930
Joined: Sat Jul 25, 2020 11:20 am
Has thanked: 112 times
Been thanked: 111 times

Re: ao486 Drivers

Unread post by Caldor »

Btw... the bios in the OP might not be the bios they are using to develop with, although it is newer. I have not tried that one yet, because in another thread it was said the developers use a certain bios with a certain CRC checksum, and I found that bios here:
http://www.elpod.org/pcem_roms/et4000w32.bin

Rename that to boot1.rom and you can use it for VESA stuff... but no idea if it will be better than the one linked in the OP.

Edit: Seems I have actually been using the one in the OP, and have not tried the one I just linked yet.
User avatar
Kreeblah
Posts: 39
Joined: Sun May 24, 2020 7:06 pm
Location: Seattle-ish
Been thanked: 2 times

Re: ao486 Drivers

Unread post by Kreeblah »

Yeah, the CRC32 of the video BIOS (boot1.rom) that people are using is 713CB637, which is the one I have linked in the first post there. It's also the same CRC32 (and SHA256) as the one there on elpod.org.

I created a GitHub repository for this stuff so we don't have to worry about other sites going down and migrated the files from the old links into that, so it should be up to date with direct links to files now.
User avatar
Caldor
Top Contributor
Posts: 930
Joined: Sat Jul 25, 2020 11:20 am
Has thanked: 112 times
Been thanked: 111 times

Re: ao486 Drivers

Unread post by Caldor »

Kreeblah wrote: Fri Jul 31, 2020 7:58 am Yeah, the CRC32 of the video BIOS (boot1.rom) that people are using is 713CB637, which is the one I have linked in the first post there. It's also the same CRC32 (and SHA256) as the one there on elpod.org.

I created a GitHub repository for this stuff so we don't have to worry about other sites going down and migrated the files from the old links into that, so it should be up to date with direct links to files now.
Ahh, nice. Yeah, it seems I got my files mixed up. I will have to double check which one I am actually using when I get home then.
User avatar
Coffea
Posts: 32
Joined: Thu May 28, 2020 8:35 pm
Has thanked: 6 times
Been thanked: 5 times

Re: ao486 Drivers

Unread post by Coffea »

Tseng ET4000 Windows 3.1 Drivers in disk img format for convenience.

Note : Don't copy the contents of this disk straight into your WINDOWS\SYSTEM .. that will brick windows. Recommend just mount the disk as and when needed.
Attachments
TsengET4000.zip
(1.02 MiB) Downloaded 285 times
Apolonius
Posts: 8
Joined: Sun May 24, 2020 7:47 pm

Re: ao486 Drivers

Unread post by Apolonius »

The ET4000 drivers for Win3.1 could works in Windows95?
User avatar
Caldor
Top Contributor
Posts: 930
Joined: Sat Jul 25, 2020 11:20 am
Has thanked: 112 times
Been thanked: 111 times

Re: ao486 Drivers

Unread post by Caldor »

Apolonius wrote: Sun Aug 02, 2020 12:17 pm The ET4000 drivers for Win3.1 could works in Windows95?
Someone got them working in Windows ME, so I would suspect so.

I am using the ET4000 drivers that come with Windows though and it seems to work for Windows 95 OSR2 and Windows 98SE. SE found the right driver on its own at the first boot.
Apolonius
Posts: 8
Joined: Sun May 24, 2020 7:47 pm

Re: ao486 Drivers

Unread post by Apolonius »

Caldor wrote: Sun Aug 02, 2020 12:23 pm
Apolonius wrote: Sun Aug 02, 2020 12:17 pm The ET4000 drivers for Win3.1 could works in Windows95?
Someone got them working in Windows ME, so I would suspect so.

I am using the ET4000 drivers that come with Windows though and it seems to work for Windows 95 OSR2 and Windows 98SE. SE found the right driver on its own at the first boot.
Thanks, I'll try to find the W95 vendor driver and if I don't have luck, then I'll go with the included in the W95 disc.
User avatar
Kreeblah
Posts: 39
Joined: Sun May 24, 2020 7:06 pm
Location: Seattle-ish
Been thanked: 2 times

Re: ao486 Drivers

Unread post by Kreeblah »

Apolonius wrote: Sun Aug 02, 2020 12:17 pm The ET4000 drivers for Win3.1 could works in Windows95?
Windows 3.1 and Windows 95 drivers are different. You should be able to just use the built-in drivers in Windows 95, though.
deepthaw
Posts: 55
Joined: Wed May 27, 2020 3:45 am
Has thanked: 1 time
Been thanked: 10 times

Re: ao486 Drivers

Unread post by deepthaw »

I keep failing to be able to set 256 colors in WfWG 3.11 using the linked BIOS and drivers. Any ideas? Do I need to revert to Windows 3.1?
User avatar
kathleen
Top Contributor
Posts: 409
Joined: Fri Jun 26, 2020 4:23 am
Location: Belgium
Has thanked: 224 times
Been thanked: 131 times

Re: ao486 Drivers

Unread post by kathleen »

If I remember well I was having issues also to run windows 3.11 in 640*480 256 colors with this driver. I then tried 640*480 in 32K colors and it ran fine. It is actually the configuration I've been using since then.

かすりん

User avatar
Coffea
Posts: 32
Joined: Thu May 28, 2020 8:35 pm
Has thanked: 6 times
Been thanked: 5 times

Re: ao486 Drivers

Unread post by Coffea »

Kreeblah wrote: Mon Aug 03, 2020 8:33 pm You should be able to just use the built-in drivers in Windows 95, though.
Built in Drivers with 95 OSR2 are good up to 1024x768 256 with Cache37, although I do have to lock the core output to 60Hz and set the speed to 90Mhz (video corruption at 100)
chimaera
Posts: 92
Joined: Sat Aug 01, 2020 10:53 am
Has thanked: 12 times
Been thanked: 17 times

Re: ao486 Drivers

Unread post by chimaera »

The versions of EMM386.EXE/HIMEM.SYS in MSDOS 6.22 contains some bugs, especially when used with slowdown apps. These bugs were fixed in the Windows 98 SE version of DOS.
The Drivers can be downloaded here:
(My Firefox says the site contains malware, but my antivirus didnt find anyting. If you dont trust the zip, pull the files yourself from WIN98SE)
https://www.legroom.net/files/howto/msdos/mem98se.zip
They replace the original files in the C:\DOS\ directory. Dont forget to make backups of the original files.

Also, there is an open source version of HIMEM.SYS called HIMEMX (used in FreeDOS),
It can be downloaded here:
https://sourceforge.net/projects/himemx/

Lastly, there is an even newer version of CTMOUSE.EXE than the one floating around on the internet.
It fixes some bugs, but can only be obtained from the C:\FDOS\ folder in FreeDOS.

These updated drivers should be a good fit in your list.
User avatar
Coffea
Posts: 32
Joined: Thu May 28, 2020 8:35 pm
Has thanked: 6 times
Been thanked: 5 times

Re: ao486 Drivers

Unread post by Coffea »

Windows 9x Video driver (from dev branch) in disk image img format
Attachments
MiSTerFB Win9x driver.zip
(10.82 KiB) Downloaded 325 times
Post Reply