Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
Another try with the sdram...
Test and Tell us!!
Test and Tell us!!
- Attachments
-
- MSX1-Beta4.01.zip
- (944.58 KiB) Downloaded 253 times
- kathleen
- Top Contributor
- Posts: 414
- Joined: Fri Jun 26, 2020 4:23 am
- Location: Belgium
- Has thanked: 226 times
- Been thanked: 135 times
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
Thank you fpganoob, I'm going to try it in a couple of minutes and let you know. Just for information, I've just tested the previous Beta04 (and the 03) by using an external SD card as you advised me, and I ended to the same issue than using them by having the boot.vhd in internal SD. Both don't work on my Mister, only the Beta02 works.
かすりん
- kathleen
- Top Contributor
- Posts: 414
- Joined: Fri Jun 26, 2020 4:23 am
- Location: Belgium
- Has thanked: 226 times
- Been thanked: 135 times
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
@fpganoob,
I've just tried the Beta4.01 and it doesn't work neither on my side. Tested with both external and internal SD. Same problem graphic issue and randomly I have a reboot or I have a message telling me that the version of the command2.com is wrong.
I've just tried the Beta4.01 and it doesn't work neither on my side. Tested with both external and internal SD. Same problem graphic issue and randomly I have a reboot or I have a message telling me that the version of the command2.com is wrong.
- Attachments
-
- NODATE-screen_0003.png (1.82 KiB) Viewed 11334 times
かすりん
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
I'm sorry, that's a strange behavior. It must be related to sdram, cause it's the only changes between this and Beta02.
We will continue trying.
Thanks for testing!!
We will continue trying.
Thanks for testing!!
- tontonkaloun
- Posts: 354
- Joined: Sun May 24, 2020 7:38 pm
- Has thanked: 152 times
- Been thanked: 52 times
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
This new version works fine on my Mister
- tontonkaloun
- Posts: 354
- Joined: Sun May 24, 2020 7:38 pm
- Has thanked: 152 times
- Been thanked: 52 times
- Alkadian
- Top Contributor
- Posts: 722
- Joined: Thu May 28, 2020 9:55 am
- Has thanked: 291 times
- Been thanked: 116 times
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
All versions work for me, but I have the VHD on network mount of the entire "GAMES" folder. Not stored on SD. 32M RAM.
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
@kathleen Do you mind to test?
Everyone is welcome to test it, specially if you have problems with Beta > 2
Everyone is welcome to test it, specially if you have problems with Beta > 2
- Attachments
-
- MSX1-Beta4.02.zip
- (949.1 KiB) Downloaded 252 times
- kathleen
- Top Contributor
- Posts: 414
- Joined: Fri Jun 26, 2020 4:23 am
- Location: Belgium
- Has thanked: 226 times
- Been thanked: 135 times
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
@fpganoob,
I've just tried the Beta02 and you know what ? This issue works like a charm now on my Mister ! I'm so happy.
Thank you so much, really appreciate your help and your great work !
I've just tried the Beta02 and you know what ? This issue works like a charm now on my Mister ! I'm so happy.
Thank you so much, really appreciate your help and your great work !
かすりん
- tontonkaloun
- Posts: 354
- Joined: Sun May 24, 2020 7:38 pm
- Has thanked: 152 times
- Been thanked: 52 times
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
This new version works very well on my mister
- Alkadian
- Top Contributor
- Posts: 722
- Joined: Thu May 28, 2020 9:55 am
- Has thanked: 291 times
- Been thanked: 116 times
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
Same here. It’s rocking out
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
good work!! Now to get 15khz ^_^
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
I am trying beta 2, beta 3 and beta 4.02 and they all works but all 3 suffers of a very tedious and boring background noise that never goes away..
Someone has same issue on his Mister?
Someone has same issue on his Mister?
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
New Beta!!!
- Better VHD management, fixed writing.
- Implemented Tape In load.
- Better VHD management, fixed writing.
- Implemented Tape In load.
- Attachments
-
- MSX1-Beta4.04.zip
- (929.51 KiB) Downloaded 243 times
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
Thank you for the update.
How do you load tapes on the MiSTer MSX core?
I have the ADC and some wav files.
How do you load tapes on the MiSTer MSX core?
I have the ADC and some wav files.
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
Thank you.
I'm sure I'm missing a step but I keep getting an error when I enter those commands.
- kathleen
- Top Contributor
- Posts: 414
- Joined: Fri Jun 26, 2020 4:23 am
- Location: Belgium
- Has thanked: 226 times
- Been thanked: 135 times
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
I've just tried on my side with the game Cubic_Duel and the correct command to load it is CLOAD (with nothing behind) and the game was loaded and ran fine (It helped me to check if my ADC works also for this core and yes! it works fine)
For the " character you should normally use SHIFT + ² (the key at the left side of the key 1(&) and you'll get the " and not the one in inverse video
Bload should work like this
For the " character you should normally use SHIFT + ² (the key at the left side of the key 1(&) and you'll get the " and not the one in inverse video
Bload should work like this
かすりん
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
Thank you!!!kathleen wrote: ↑Sun Sep 27, 2020 8:19 pm I've just tried on my side with the game Cubic_Duel and the correct command to load it is CLOAD (with nothing behind) and the game was loaded and ran fine (It helped me to check if my ADC works also for this core and yes! it works fine)
For the " character you should normally use SHIFT + ² (the key at the left side of the key 1(&) and you'll get the " and not the one in inverse video
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
Thank you.kathleen wrote: ↑Sun Sep 27, 2020 8:19 pm I've just tried on my side with the game Cubic_Duel and the correct command to load it is CLOAD (with nothing behind) and the game was loaded and ran fine (It helped me to check if my ADC works also for this core and yes! it works fine)
For the " character you should normally use SHIFT + ² (the key at the left side of the key 1(&) and you'll get the " and not the one in inverse video
Bload should work like this
I'm making some progress. I can load cubic duel but I don't get the OK prompt.
- wark91
- Core Developer
- Posts: 334
- Joined: Sun May 24, 2020 8:34 pm
- Has thanked: 447 times
- Been thanked: 94 times
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
I have question regarding the config.txt.
I changed the keyboard and set 0 to turbo. It doesn't seem to be taking in account.
The keyboard layout doesn't change and the games still too quick.
Is the config.txt is taking in account ? How to slow down the game (disable the turbo) ?
I changed the keyboard and set 0 to turbo. It doesn't seem to be taking in account.
The keyboard layout doesn't change and the games still too quick.
Is the config.txt is taking in account ? How to slow down the game (disable the turbo) ?
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
Yes Turbo setting from config.txt is read and configured at boot.wark91 wrote: ↑Wed Sep 30, 2020 5:41 pm I have question regarding the config.txt.
I changed the keyboard and set 0 to turbo. It doesn't seem to be taking in account.
The keyboard layout doesn't change and the games still too quick.
Is the config.txt is taking in account ? How to slow down the game (disable the turbo) ?
IIRC Keyboard layout too.
You can change the turbo status with turbo from msxdos. It's an utility from the original core from Fabio.
Beta 4.05 01/10/2020
- Tape Load in Turbo mode up to, al least, 3850 Bauds. In Normal mode just 1200 Bauds
- Attachments
-
- MSX1-Beta4.05.zip
- (954.6 KiB) Downloaded 351 times
Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss
With Release Beta 4.05 finally I was able to load from Tape successfully.fpganoob wrote: ↑Thu Oct 01, 2020 9:28 amYes Turbo setting from config.txt is read and configured at boot.wark91 wrote: ↑Wed Sep 30, 2020 5:41 pm I have question regarding the config.txt.
I changed the keyboard and set 0 to turbo. It doesn't seem to be taking in account.
The keyboard layout doesn't change and the games still too quick.
Is the config.txt is taking in account ? How to slow down the game (disable the turbo) ?
IIRC Keyboard layout too.
You can change the turbo status with turbo from msxdos. It's an utility from the original core from Fabio.
Beta 4.05 01/10/2020
- Tape Load in Turbo mode up to, al least, 3850 Bauds. In Normal mode just 1200 Bauds