CPS 2 Release to Public ?

[Hectic]

[jca]

It looks like it is done but the update script did not work for me. I have everything on USB drive and use symlinks on the SD card which could be the cause.

[zakk4223]

Do you have it configured to look for 'beta' or 'stable' jt cores? It's only in jtbin which is 'beta'

[jca]

Yes, I just figured it out, the core is still in beta but is public.

[Hectic]

It's public since an hour or so. Just download the files and replace previous rbf and mra.

[jca]

I know about that but as I just setup my MISTer to use symlinks I wanted to be sure that everything works properly. So far it does.

[Hectic]

Yup, I missunderstud that about «the core is still in beta but is public»

[aberu]

https://github.com/jotego/jtbin/blob/ma ... 210618.rbf

You can use this for now, it's the final release candidate which he already made public awhile ago. It's the one that still has some of the bugs he was working to address regarding the 68k I think.

20210618 is a 'shareware' core for me, requires beta.zip

Oh that sucks. I thought only System16 was impacted by that change.

[jca]

Jotego indicated that the "stable" repository will be updated only a few times a year so you have either to use the beta settings or manually download from jtbin.

[lamarax]

Oh that sucks. I thought only System16 was impacted by that change.

Let's not panic, JT fixed the issue approximately 0.2 seconds after.

Run update_all again

[jca]

Some CPS2 roms are <= 32MB and won't run properly with only 32MB SDRAM.
This is what I found so far:
All ROMs will "load" without crashing MISTer.

Some will present a totally messed up screen and will be totally unplayable:
Cyberbots Full Metal Madness
Hyper Street Fighter 2 - Than anniversary Edition
Mars Matrix Hyper Solid Shooting
Marvel Super Heroes
Marvel Super Heroes vs Street Fighter
Marvel vs Capcom Clash of Super Heroes
Night Warriors Darkstalkers Revenge
Street Fighter Alpha 3
Vampire Hunter 2 Dark Stalkers Revenge
Vampire Savior 2 The Lord of Vampire (both versions)
X-Men Children of the Atom
X-Men vs Street Fighter

One has a screen not so much messed up:
Darkstalkers The Night Warrior
Not really playable as yourself or your opponent will be messed up at the beginning, I suppose it will get worse as one progresses during the game.

I suppose there are other roms which will exhibit problems later on during the game.

Does anyone has a list of all the roms >= 32MB?

[Hodor]

[...]

Does anyone has a list of all the roms >= 32MB?

There is a list in Jotego´s repository where you can easily find what games need more than 32MB:

https://github.com/jotego/jtbin/tree/master/mister/cps2

However, being under 32MB on that list does not guaranteed that the game works flawlessly. For example, 1944 sums over 29.5MB but shows graphical glitches that make it unplayable.

[retrofan01]

Is there any point in using or keeping the update_jotego.sh script if update_all with 'Install beta cores' set to true is required to download the latest publically available Jotego cores? Or has it already been deprecated?

[jca]

You don't need it, update all downloads it (I suppose in a temp folder). It even does not do the updates, it downloads all the other update scripts which are the ones doing the updates.

[Fallon]

Is CPS2 included in Update_All.sh as it only downloads CPS1 to 1.5 for me.

It doesn't seem to check for CPS2 files?

[rhester72]

Is CPS2 included in Update_All.sh as it only downloads CPS1 to 1.5 for me.

It doesn't seem to check for CPS2 files?

Enable beta for Jotego

[ash2fpga]

Is CPS2 included in Update_All.sh as it only downloads CPS1 to 1.5 for me.

It doesn't seem to check for CPS2 files?

Enable beta to get CPS2.

If you have beta disabled, it checks:
https://github.com/JTFPGA/JTSTABLE/wiki

If you have beta enabled, it checks:
https://github.com/jotego/jtbin/wiki

See:
https://github.com/jotego/Updater_scrip ... er.sh#L480

[Fallon]

Is CPS2 included in Update_All.sh as it only downloads CPS1 to 1.5 for me.

It doesn't seem to check for CPS2 files?

Enable beta to get CPS2.

If you have beta disabled, it checks:
https://github.com/JTFPGA/JTSTABLE/wiki

If you have beta enabled, it checks:
https://github.com/jotego/jtbin/wiki

See:
https://github.com/jotego/Updater_scrip ... er.sh#L480

Beta is enabled in my jotego updte_all settings - it doesn't download CPS2 from jtbin, where CPS2 currently resides.

Is CPS2 available for all or is a beta key still needed?

[jca]

If beta is enabled it should download it when using update all script. The core is in beta but is public, no key needed. Correction on the quote you posted: if beta is enabled it checks both in JTSTABLE and jtbin. At some point mentioned something which makes me think that it is (also?) in JTSTABLE but I am not sure. What I can tell you is that if you enable beta you should get it where ever it is located. It worked for me.

[pbsk8]

you have to make sure to set to true in update all settings for jotego core and SAVE.

If you just set and go back to menu and abort it wont work.

[Fallon]

you have to make sure to set to true in update all settings for jotego core and SAVE.

Already done that - it has no effect.

[jca]

I just checked on Github, it is only in jtbin, not JTSTABLE. So you must use the beta option. You should have a update_all.ini in the Scripts directory, check that it contains the following line:
DOWNLOAD_BETA_CORES="true"

[Fallon]

I just checked on Github, it is only in jtbin, not JTSTABLE. So you must use the beta option. You should have a update_all.ini in the Scripts directory, check that it contains the following line:
DOWNLOAD_BETA_CORES="true"

Thanks, I had to manually add the above to the script, it now downloads CPS2

[retro]

I just checked on Github, it is only in jtbin, not JTSTABLE. So you must use the beta option. You should have a update_all.ini in the Scripts directory, check that it contains the following line:
DOWNLOAD_BETA_CORES="true"

I added it to my update_all.ini, but it didn't work

This is what my INI file looks like, am I missing anything?

Code: Select all

MAIN_UPDATER_INI="update.ini"
JOTEGO_UPDATER_INI="update_jtcores.ini"
UNOFFICIAL_UPDATER_INI="update_unofficials.ini"
LLAPI_UPDATER_INI="update_llapi.ini"
BIOS_GETTER="false"
MAME_GETTER="false"
HBMAME_GETTER="false"
ARCADE_ORGANIZER="false"
DOWNLOAD_BETA_CORES="true"

[zakk4223]

You need to add the DOWNLOAD_BETA_CORES to update_jtcores.ini not update_all.ini

Or just use the configuration mode of update_all and set it that way

[Fallon]

You need to add the DOWNLOAD_BETA_CORES to update_jtcores.ini not update_all.ini

Or just use the configuration mode of update_all and set it that way

Funny, there's no update_jtcores.ini in my Scripts folder. What a complete confusing mess this update process is.

[jca]

Just delete your update_all.ini, start update_all script, when it starts press the up arrow and configure what you want to enable. Don't forget to save and execute the script.

Edit: I see that you have llapi stuff in your ini file. Do you use llapi?
Your update_all.ini has so much stuff in it.
Mine, created by the using the configuration screen has only:
UNOFFICIAL_UPDATER="true"
BIOS_GETTER="false"
BIOS_GETTER_INI="update_all.ini"
DOWNLOAD_BETA_CORES="true"

[theypsilon]

You need to add the DOWNLOAD_BETA_CORES to update_jtcores.ini not update_all.ini

Or just use the configuration mode of update_all and set it that way

Funny, there's no update_jtcores.ini in my Scripts folder. What a complete confusing mess this update process is.

This is all you have to do: https://www.youtube.com/watch?v=alcKBAxl82k

[retro]

You need to add the DOWNLOAD_BETA_CORES to update_jtcores.ini not update_all.ini

Or just use the configuration mode of update_all and set it that way

Funny, there's no update_jtcores.ini in my Scripts folder. What a complete confusing mess this update process is.

This is all you have to do: https://www.youtube.com/watch?v=alcKBAxl82k

Works beautifully! Thank you!

[Pulsar]

Sorry if I missed it, but what's the trick for getting the CPS2 games to run after going public? Everything worked prior to this, but right now, they're only showing a black screen upon boot-up.

Steps taken so far, followed the instructions 'letter-perfect' using the update_all script, even downloaded the new beta.zip for the month of July, sadly nothing! Any ideas I might have overlooked?