Jotego Confirms CPS3 / PGM / Mortal Kombat

User avatar
Mr. Encyclopedia
Posts: 111
Joined: Thu Aug 05, 2021 1:52 am
Has thanked: 50 times
Been thanked: 47 times
Contact:

Re: Jotego Confirms CPS3 / PGM / Mortal Kombat

Unread post by Mr. Encyclopedia »

The main problem with the N64 is the 250Mhz memory bus. Only the DDR3 memory on the DE10-nano is fast enough to handle that, but because it's behind the HPS (Arm) side there's inbuilt latency that's a huge challenge to overcome. It's not impossible, but it's a more significant challenge than just about anything else that's ever been attempted, and there's a good chance that even the best effort would result in something less than a perfect recreation of the original hardware.
User avatar
madmax
Posts: 27
Joined: Tue Jun 08, 2021 11:32 am
Location: Miyazaki - Japan
Has thanked: 6 times
Been thanked: 4 times

Re: Jotego Confirms CPS3 / PGM / Mortal Kombat

Unread post by madmax »

I m curious how Jotego will handle the weird refresh-rate of MK arcade board. it runs at around 54hz.
On a CRT monitor, its not an issue, they can handle it perfectly but with LCD monitors, until Freesync/G-Sync/VRR/Adaptive sync (so many names..lol) was a thing, you had to choose between stuttering vertical screen or squeeking turbo sub-zero by forcing "match monitor refresh rate" option...lol.
can MiSTer makes use of adaptive sync monitor and send something else than 50hz/60hz on the HDMI?
Neocaron
Posts: 350
Joined: Sun Sep 27, 2020 10:16 am
Has thanked: 191 times
Been thanked: 71 times

Re: Jotego Confirms CPS3 / PGM / Mortal Kombat

Unread post by Neocaron »

madmax wrote: Wed Nov 24, 2021 1:56 pm I m curious how Jotego will handle the weird refresh-rate of MK arcade board. it runs at around 54hz.
On a CRT monitor, its not an issue, they can handle it perfectly but with LCD monitors, until Freesync/G-Sync/VRR/Adaptive sync (so many names..lol) was a thing, you had to choose between stuttering vertical screen or squeeking turbo sub-zero by forcing "match monitor refresh rate" option...lol.
can MiSTer makes use of adaptive sync monitor and send something else than 50hz/60hz on the HDMI?
It's the case for a few arcade games that have odd refreshes, like Dodonpachi. So I expect that a 50hz, or 60hz mode should be possible.
The ipad screen I have can accept any refreshes from 48 to 62 natively, so that should be fine for me anyway :mrgreen:
softtest9
Posts: 158
Joined: Thu May 28, 2020 7:13 pm
Has thanked: 3 times
Been thanked: 21 times

Re: Jotego Confirms CPS3 / PGM / Mortal Kombat

Unread post by softtest9 »

madmax wrote: Wed Nov 24, 2021 1:56 pm can MiSTer makes use of adaptive sync monitor and send something else than 50hz/60hz on the HDMI?
The MiSTer has no concept of VRR, but if you can select the refresh rate manually in Windows, it should work fine with the MiSTer as well. The MiSTer is not restricted to 50/60hz.
Post Reply