VGA to SCART Cable no Sound (Solved)

martini2
Posts: 6
Joined: Sat Apr 10, 2021 2:04 pm
Has thanked: 1 time

VGA to SCART Cable no Sound (Solved)

Unread post by martini2 »

Hi,
i use the oficial VGA(with audio out cable) to SCART cable to connect the mister to a crt tv. Video works great but
unfortunately there is no sound comming out from the TV. Do i have to edit some .ini files to make it work or do i have to connect the audio out cable to the pins 2,6 and 4 from the SCART connector some how?
chimaera
Posts: 57
Joined: Sat Aug 01, 2020 10:53 am
Been thanked: 9 times

Re: VGA to SCART Cable no Sound

Unread post by chimaera »

I have this cable:
https://retro-access.com/products/mister-io-scart

No special ini settings except for vga video settings and sound works perfectly.

If you get picture on your crt, you should get sound if the sound part of the cable is connected to 3.5mm audio output on the io board.
martini2
Posts: 6
Joined: Sat Apr 10, 2021 2:04 pm
Has thanked: 1 time

Re: VGA to SCART Cable no Sound

Unread post by martini2 »

Thank you very much!
:oops: I thought the audio cable was for an external amplifier.
After connecting the audio cable comming from the vga connector to the audio output on the io board i have video and audio on the tv.
Post Reply