Making the MiSTer JAMMA Compatible

Community created YouTube tutorials, interviews and helpful online information guides.
keilmillerjr
Posts: 47
Joined: Wed Mar 24, 2021 12:52 pm
Has thanked: 3 times
Been thanked: 6 times

Making the MiSTer JAMMA Compatible

Unread post by keilmillerjr »

I created JAMMA.xlsx to help you make your MiSTer JAMMA compatible and work in your arcade machine. It includes the following sheets.

  • MiSTer to JAMMA

  • Molex

  • Part sourcing

  • JAMMA

  • JAMMA+

  • JAMMA 19 in 1

  • JAMMA MVS

  • JAMMA Adapter - Antonio Villena

  • JPAC - Ultimarc

  • Neo Geo PCB

JAMMA.xlsx
(36.86 KiB) Downloaded 82 times
keilmillerjr
Posts: 47
Joined: Wed Mar 24, 2021 12:52 pm
Has thanked: 3 times
Been thanked: 6 times

Re: Making the MiSTer JAMMA Compatible

Unread post by keilmillerjr »

New JAMMA pin out sheets added. They now include accurate color codes.
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: Making the MiSTer JAMMA Compatible

Unread post by antoniovillena »

Thank you for this datasheet. It's very helpful. About my adapter there are 2 corrections:
1. Is my mistake. I use the other 12V line too but not appeared on the schematic. Now it's updated.
2. The 6p buttons for CHAMMA support are by default unconnected. The reason is because there is GND line there and this would cause continuous pulsation. Also the 6p is available on the kick harness. So for activate CHAMMA 6p button on my adapter you need to install 2 jumper caps.
Attachments
jamma.png
jamma.png (92.13 KiB) Viewed 3507 times
keilmillerjr
Posts: 47
Joined: Wed Mar 24, 2021 12:52 pm
Has thanked: 3 times
Been thanked: 6 times

Re: Making the MiSTer JAMMA Compatible

Unread post by keilmillerjr »

Thanks for the clarification Antonio. I updated the spreadsheet.
Post Reply