UltimateMiSTer.com / MiSTerFPGA.eu

Only official MiSTer add-on boards!
lazytechnician
Posts: 7
Joined: Tue Sep 08, 2020 11:32 am

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by lazytechnician »

Hmmm, anyone able to output to an RGB Scart crt? Im just getting a rolling image currently, on a B+O MX4000

Using a cable from Amigastore.eu

Output is fine over HDMI
User avatar
rickdangerous
Posts: 54
Joined: Sun May 24, 2020 7:35 pm
Location: Lisbon, Portugal
Been thanked: 1 time
Contact:

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by rickdangerous »

For the amigastore cable you need to change voltage in the jumpers near VGA connector. Will work with 3.3v. But also check the scandoubler setting.

With my cables all work “on the fly”.
MiSTer FPGA European Shop. Full Setups and Official Addons.
https://ultimatemister.com powered by RetroShop.pt
lazytechnician
Posts: 7
Joined: Tue Sep 08, 2020 11:32 am

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by lazytechnician »

Ah ok!

So would I have better luck with one of these do you think?

https://ultimatemister.com/product/rgb-scart-cable/

I'm not sure I trust myself to mess with the jumpers :)
johhenrik
Posts: 10
Joined: Mon Aug 10, 2020 8:49 pm

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by johhenrik »

I have received my Ultimate Mister Pro and loving it! I can recommend both the product and the seller.
jamesfk
Posts: 6
Joined: Mon Sep 28, 2020 11:31 am

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by jamesfk »

Just to add my weight to this discussion - I'm a first time Mister owner, and bought my full setup from Ricardo at UltimateMiSTer.com.

As others have said, Ricardo's service is second-to-none, both in giving generous advice before the purchase and some pointers in the right direction after it arrived. The box was totally loaded up and ready to go, and the packing was very secure and sturdy - so an excellent experience.

I'd thoroughly recommend UltimateMiSTer.com for all your Mister needs in Europe.
Ash
Posts: 2
Joined: Thu Sep 24, 2020 12:53 am

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by Ash »

Currently waiting for my Ultimate MiSTer PRO Digital from ultimatemister.com, eagerly looking forward to it. Do I understand correctly that it comes with a US plug and power supply? What do other european mister users recommend for replacements?
anightin
Posts: 6
Joined: Wed Sep 30, 2020 11:58 am

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by anightin »

I am quite tempted to get a case for my Mister Components.

My setup is circa 2018. Any compatibility issues with older USB hubs etc?
johhenrik
Posts: 10
Joined: Mon Aug 10, 2020 8:49 pm

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by johhenrik »

Ash wrote: Wed Sep 30, 2020 1:59 am Currently waiting for my Ultimate MiSTer PRO Digital from ultimatemister.com, eagerly looking forward to it. Do I understand correctly that it comes with a US plug and power supply? What do other european mister users recommend for replacements?
I bought the power supply from misterfpga.co.uk, plus the on-off switch. Works like a charm with my Ultimate Mister Pro + a 2.5" external HDD, powered over USB from the Mister.

https://misterfpga.co.uk/product/mister ... er-supply/
https://misterfpga.co.uk/product/mister ... er-switch/

(I also bought SNAC-board, adapters, plus wifi and BT dongles from Nat at misterfpga.co.uk. All that works too.)
User avatar
rickdangerous
Posts: 54
Joined: Sun May 24, 2020 7:35 pm
Location: Lisbon, Portugal
Been thanked: 1 time
Contact:

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by rickdangerous »

anightin wrote: Thu Oct 01, 2020 8:06 am I am quite tempted to get a case for my Mister Components.

My setup is circa 2018. Any compatibility issues with older USB hubs etc?
PM me directly here or from site or Facebook, I have all kinds of official cases for new and older IO. We can organize that.
Just hub need to be specific.
MiSTer FPGA European Shop. Full Setups and Official Addons.
https://ultimatemister.com powered by RetroShop.pt
User avatar
rickdangerous
Posts: 54
Joined: Sun May 24, 2020 7:35 pm
Location: Lisbon, Portugal
Been thanked: 1 time
Contact:

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by rickdangerous »

Ash wrote: Wed Sep 30, 2020 1:59 am Currently waiting for my Ultimate MiSTer PRO Digital from ultimatemister.com, eagerly looking forward to it. Do I understand correctly that it comes with a US plug and power supply? What do other european mister users recommend for replacements?
Ash,
It comes with the original PSU, and with EUR plug adapter works perfectly even with 2 external HDD USB 2.0. You can upgrade to 3A if you really feel necessary. You don't need power switch in Digital Edition.
MiSTer FPGA European Shop. Full Setups and Official Addons.
https://ultimatemister.com powered by RetroShop.pt
lazytechnician
Posts: 7
Joined: Tue Sep 08, 2020 11:32 am

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by lazytechnician »

lazytechnician wrote: Sun Sep 20, 2020 12:32 am Ah ok!

So would I have better luck with one of these do you think?

https://ultimatemister.com/product/rgb-scart-cable/

I'm not sure I trust myself to mess with the jumpers :)
Just to circle back, I received my Cable from Rick today, literally was plug and play!!

Ultimate Mister looking amazing on my B&O MX4000 today! :)

Was even able to shoot a duck with my Nes Zapper!!
User avatar
rickdangerous
Posts: 54
Joined: Sun May 24, 2020 7:35 pm
Location: Lisbon, Portugal
Been thanked: 1 time
Contact:

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by rickdangerous »

I will recommend just Edimax or ASUS wifi dongles. I would avoid Aliexpress Wifi dongles. Based on several users, sometimes the wifi speed drops on those.
MiSTer FPGA European Shop. Full Setups and Official Addons.
https://ultimatemister.com powered by RetroShop.pt
User avatar
rickdangerous
Posts: 54
Joined: Sun May 24, 2020 7:35 pm
Location: Lisbon, Portugal
Been thanked: 1 time
Contact:

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by rickdangerous »

New USB encoders, based on Deamonbite Arcade Encoder 0,75ms but with MicroUSB cable and ABS case to be listed on ultimatemister.com

NeoGeo version ready, 20€ / unit.
IMG_20201009_103848.jpg
IMG_20201009_103848.jpg (1.69 MiB) Viewed 635 times
MiSTer FPGA European Shop. Full Setups and Official Addons.
https://ultimatemister.com powered by RetroShop.pt
TrejoPhD
Posts: 5
Joined: Fri Sep 04, 2020 6:22 pm

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by TrejoPhD »

People in the US who have ordered from Ricardo... how long did it take for yours to arrive?

Min was shipped on 09/24 and I still do not have it as of 10/13.

The shipping info has not been updated since 09/25 when it said it was in Lisbon.

Could it be stuck in Customs?
v64
Posts: 3
Joined: Wed Jul 01, 2020 5:56 am

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by v64 »

TrejoPhD wrote: Tue Oct 13, 2020 8:30 pm People in the US who have ordered from Ricardo... how long did it take for yours to arrive?

Min was shipped on 09/24 and I still do not have it as of 10/13.

The shipping info has not been updated since 09/25 when it said it was in Lisbon.

Could it be stuck in Customs?
This was the timeline for my order from earlier this summer:
July 27: Ricardo drops it off in the mail and it's accepted by the post
No updates until August 28: Arrived at JFK
August 29: Received at LAX
Then again, no updates until September 5: Delivered that day
TrejoPhD
Posts: 5
Joined: Fri Sep 04, 2020 6:22 pm

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by TrejoPhD »

v64 wrote: Wed Oct 14, 2020 7:57 pm This was the timeline for my order from earlier this summer:
July 27: Ricardo drops it off in the mail and it's accepted by the post
No updates until August 28: Arrived at JFK
August 29: Received at LAX
Then again, no updates until September 5: Delivered that day
Thank you! This makes me worry a lot less!
v64
Posts: 3
Joined: Wed Jul 01, 2020 5:56 am

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by v64 »

Here to add another positive review: Received my Ultimate MiSTer PRO last month and everything was ready to go out of the box. I bought the Pro especially so I could play Neo-Geo and it works perfectly. I use a wireless 8bitdo controller + USB dongle connected to my TV using HDMI and it works great with no input or video lag. Thank you Ricardo for putting out such a high quality product!
User avatar
rickdangerous
Posts: 54
Joined: Sun May 24, 2020 7:35 pm
Location: Lisbon, Portugal
Been thanked: 1 time
Contact:

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by rickdangerous »

TrejoPhD wrote: Thu Oct 15, 2020 1:36 pm
v64 wrote: Wed Oct 14, 2020 7:57 pm This was the timeline for my order from earlier this summer:
July 27: Ricardo drops it off in the mail and it's accepted by the post
No updates until August 28: Arrived at JFK
August 29: Received at LAX
Then again, no updates until September 5: Delivered that day
Thank you! This makes me worry a lot less!
Anything you need I'm here if necessary ;)
MiSTer FPGA European Shop. Full Setups and Official Addons.
https://ultimatemister.com powered by RetroShop.pt
grizzly
Posts: 52
Joined: Tue Jun 16, 2020 12:22 pm
Has thanked: 1 time

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by grizzly »

I need a pizza do you deliver? :lol:
Spookyy
Posts: 2
Joined: Mon Sep 14, 2020 7:56 pm

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by Spookyy »

Got my Ultimate Mister yesterday in a nice package!
User avatar
rickdangerous
Posts: 54
Joined: Sun May 24, 2020 7:35 pm
Location: Lisbon, Portugal
Been thanked: 1 time
Contact:

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by rickdangerous »

grizzly wrote: Mon Oct 19, 2020 10:43 pm I need a pizza do you deliver? :lol:
Nothing impossible. My parents have a backery right next my office :)
MiSTer FPGA European Shop. Full Setups and Official Addons.
https://ultimatemister.com powered by RetroShop.pt
TrejoPhD
Posts: 5
Joined: Fri Sep 04, 2020 6:22 pm

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by TrejoPhD »

rickdangerous wrote: Mon Oct 19, 2020 1:18 pm Anything you need I'm here if necessary ;)
Arrived yesterday and everything is PERFECT. Thank you!
Seems like USPS still slow, but I'm *very happy* with the product!
thera34
Posts: 8
Joined: Fri Sep 11, 2020 7:51 am

Re: UltimateMiSTer.com / MiSTerFPGA.eu

Unread post by thera34 »

Arrived today and couldn't be more happier, just in time for my b-day :)
Thank you, Ricardo !

Another happy customer ;) Fully recommend UltimateMiSTer.
Post Reply