Page 13 of 18

Re: X68000 Beta - Updates and Releases

Posted: Wed Nov 24, 2021 7:51 pm
by jca
Another question: what file system did you use on your USB drive?

Re: X68000 Beta - Updates and Releases

Posted: Wed Nov 24, 2021 8:01 pm
by jca
I also made a mistake: X68000 must be in /media/fat/bootrom.

Re: X68000 Beta - Updates and Releases

Posted: Wed Nov 24, 2021 9:20 pm
by Murderface1982
sub directories for other cores on the SD card. I figured the issue lies in the hard drive or file structure... I moved files to the SD card and it seems to be working albeit intermittently, but I think that has to do more with the fact that I'm pretty new at running this core.

Awesome core when it works right.

With multi disk games, are do you load both the disk images at the same time? Ioaded dracula in both disk drives and that seemed to be the only think that got it working...

Re: X68000 Beta - Updates and Releases

Posted: Wed Nov 24, 2021 9:41 pm
by softtest9
Yes, if the game comes with 2 floppies, you pretty much always run it by putting floppy 1 in drive 1 and floppy 2 in drive 2. If the game comes with 3 or more floppies, it's harder to tell. It could be that it has two floppies for playing and a third floppy for saving progress. Or it might not run at all unless you install it to the harddrive. It depends on the game.

Re: X68000 Beta - Updates and Releases

Posted: Wed Nov 24, 2021 10:59 pm
by jca
@ Murderface1982
You did not say what FS you used on the USB drive. If it is NTFS note that it is case sensitive and X68000 must be with a capital X.

Re: X68000 Beta - Updates and Releases

Posted: Thu Nov 25, 2021 2:36 am
by Murderface1982
I can't remember I'll check when I get home... My file system works for every other console and I made sure the uppercase lowercase matched on both... Games might not matchup or something though, but then I would assume my other cores wouldn't be able to locate files either.

Re: X68000 Beta - Updates and Releases

Posted: Thu Nov 25, 2021 3:50 am
by Murderface1982
It's the weirdest fucking thing... I'm intermittently getting Directory not found now. It works sometimes and sometimes it doesn't. I have no idea what the hell is causing this...

Re: X68000 Beta - Updates and Releases

Posted: Thu Nov 25, 2021 4:28 am
by jca
Power supply problem?
Apparently X68000 is/was the only games subdirectory you have/had on your USB drive. The case sensitivity is only for USB drives formatted NTFS so it does not affect what is on your SD card.
Is the USB drive a new addition to your setup?
Did your run anything else from your USB drive?
How many Amps can your power supply deliver?
Now that you moved X68000 to your SD card did you disconnect your USB drive?
If not disconnect it and see if it works. If it does it means that your power supply does not deliver enough Amps.

Re: X68000 Beta - Updates and Releases

Posted: Thu Nov 25, 2021 4:47 am
by ExCyber
Murderface1982 wrote: Thu Nov 25, 2021 3:50 am It's the weirdest fucking thing... I'm intermittently getting Directory not found now. It works sometimes and sometimes it doesn't. I have no idea what the hell is causing this...
I can think of a couple things that might cause this behavior:

1) Insufficient power supply causing the drive to be unreliable.

2) Two file systems covering the same portion of the drive. I've seen this before, but I don't know exactly how it got into that state. Basically, I had a Linux system that prioritized mounting /dev/sdb, while plugging the same disk into Windows would prioritize the equivalent of /dev/sdb1 (or maybe it was the other way around). Both appeared to be valid file systems, but their contents didn't match and attempting to access certain files would cause strange failures because related structures had been overwritten by the other system.

Re: X68000 Beta - Updates and Releases

Posted: Thu Nov 25, 2021 8:52 am
by Murderface1982
jca wrote: Thu Nov 25, 2021 4:28 am Power supply problem?
Apparently X68000 is/was the only games subdirectory you have/had on your USB drive. The case sensitivity is only for USB drives formatted NTFS so it does not affect what is on your SD card.
Is the USB drive a new addition to your setup?
Did your run anything else from your USB drive?
How many Amps can your power supply deliver?
Now that you moved X68000 to your SD card did you disconnect your USB drive?
If not disconnect it and see if it works. If it does it means that your power supply does not deliver enough Amps.

Hilarious, unplugged my hard drive and now I am good to go. So weird.

Re: X68000 Beta - Updates and Releases

Posted: Thu Nov 25, 2021 10:08 am
by jca
I have 2 recommendations for you:

1. When you ask for help people trying to help will ask you questions, answering them will make things a lot easier and faster to solve your problems.
2. If you want to use a USB drive ditch the power supply which came with the DE10-Nano and get a beefy one.

That said I am done with this problem.

Re: X68000 Beta - Updates and Releases

Posted: Thu Nov 25, 2021 9:26 pm
by Thedad
eewoke wrote: Sun Nov 21, 2021 11:41 am
mattsoft wrote: Fri Nov 19, 2021 10:53 pm
eewoke wrote: Fri Nov 19, 2021 8:51 pm

Me too. Unfortunately nobody has responded. Very strange.
I posted this question on the discord server and was told that the core currently only runs properly at 800x600 resolution because the core has not had the standard scalar framework linked in yet. Haven't tried that yet, but you might want to see if that fixes the issue.
Used the latest beta from discord. All fine now.
Have you got a link and version that fixes this, pls?

Re: X68000 Beta - Updates and Releases

Posted: Mon Nov 29, 2021 5:46 pm
by catenaccio
Anyone got pi-midi working with other games than Akumayou Dracula??

With X68000_20211108 core version only works with that game, with other games core hangs after changing to midi sound in menu

Re: X68000 Beta - Updates and Releases

Posted: Wed Dec 01, 2021 1:10 pm
by ConkerKing
Hello all,
i finally register to this great community and first want to thank all the genius people for the nice work with this stuff ;D

So i just tried the X68000 Core and run into the same problem like "catenaccio"

catenaccio wrote: Mon Nov 29, 2021 5:46 pm Anyone got pi-midi working with other games than Akumayou Dracula??

With X68000_20211108 core version only works with that game, with other games core hangs after changing to midi sound in menu
What we missing? Or is it just because it´s still beta?

cheerz

Re: X68000 Beta - Updates and Releases

Posted: Wed Dec 01, 2021 3:47 pm
by zakk4223
There are issues with MIDI, I believe Kitrinx said there are some unimplemented interrupts.

Some games work with it, others will just hang

Re: X68000 Beta - Updates and Releases

Posted: Thu Dec 02, 2021 2:20 pm
by ConkerKing
Thank you for the reply ^_^

Re: X68000 Beta - Updates and Releases

Posted: Sat Dec 04, 2021 1:37 pm
by Milspex
is there a patreon to support for x68000? I'm confused as to who is actively working on it right now.

Kitrinx? Puu?

Re: X68000 Beta - Updates and Releases

Posted: Sat Dec 04, 2021 1:42 pm
by hernan43
There are a couple of forks that seem to be active. My preferred fork is Kitrinx’s.

Re: X68000 Beta - Updates and Releases

Posted: Mon Dec 06, 2021 11:24 pm
by MadDog
Does anyone know what the 登録 key is mapped to?

The 登録 key on the X68000 keyboard is often used to toggle on MIDI mode in games (hold the button while the game is booting). It's right next to the 'HELP' button the X68000 keyboard.
X68000 Keyboard
X68000 Keyboard
IMG_9339.jpg (629.08 KiB) Viewed 14236 times
Thanks!! :D

Re: X68000 Beta - Updates and Releases

Posted: Tue Dec 07, 2021 12:40 am
by ExCyber
MadDog wrote: Mon Dec 06, 2021 11:24 pm Does anyone know what the 登録 key is mapped to?
I can't test it right now, but based on skimming the keycode ROMs I think it's Scroll Lock.

Re: X68000 Beta - Updates and Releases

Posted: Tue Dec 07, 2021 4:16 pm
by wark91
Special keys are not mapped for the moment.
It is a known issue and will be fixed.

Re: X68000 Beta - Updates and Releases

Posted: Fri Dec 10, 2021 1:37 pm
by Thedad
I'm sure others have commented here - but I've just got the latest core for this and all I get is a garbled type screen.

I can use an early 2021 version of the core and it's fine, but anything after about August and it's scrambled 'junk'. I can see the flashing cursor as scrambled output, so it's booting ok.

Any knowledge on why this would be?
X68000.jpg
X68000.jpg (490.86 KiB) Viewed 13800 times

Re: X68000 Beta - Updates and Releases

Posted: Fri Dec 10, 2021 2:05 pm
by jca
Does anyone know what is this boot3.vhd?

Re: X68000 Beta - Updates and Releases

Posted: Fri Dec 10, 2021 2:21 pm
by pac
Thedad wrote: Fri Dec 10, 2021 1:37 pm I'm sure others have commented here - but I've just got the latest core for this and all I get is a garbled type screen.

I can use an early 2021 version of the core and it's fine, but anything after about August and it's scrambled 'junk'. I can see the flashing cursor as scrambled output, so it's booting ok.

Any knowledge on why this would be?

X68000.jpg
Just want to add that I'm experiencing the same issue, so it's not exclusively your Mister.

Re: X68000 Beta - Updates and Releases

Posted: Fri Dec 10, 2021 2:25 pm
by SuperBabyHix
Thedad wrote: Fri Dec 10, 2021 1:37 pm I'm sure others have commented here - but I've just got the latest core for this and all I get is a garbled type screen.
If you have gamma correction enabled, try disabling it. I had some similar issues with it enabled.

Re: X68000 Beta - Updates and Releases

Posted: Fri Dec 10, 2021 3:07 pm
by pac
SuperBabyHix wrote: Fri Dec 10, 2021 2:25 pm
Thedad wrote: Fri Dec 10, 2021 1:37 pm I'm sure others have commented here - but I've just got the latest core for this and all I get is a garbled type screen.
If you have gamma correction enabled, try disabling it. I had some similar issues with it enabled.
Thx for the quick answer - unfortunately not the case here. Reset all the settings too, did not solve the issue.

Re: X68000 Beta - Updates and Releases

Posted: Fri Dec 10, 2021 4:35 pm
by Thedad
Thanks for the replies.

No gamma correction here, all setting reset.

I thought maybe SDRAM speed issues, but earlier versions work fine.

Re: X68000 Beta - Updates and Releases

Posted: Fri Dec 10, 2021 5:36 pm
by rhoads5150
pac wrote: Fri Dec 10, 2021 3:07 pm
SuperBabyHix wrote: Fri Dec 10, 2021 2:25 pm
Thedad wrote: Fri Dec 10, 2021 1:37 pm I'm sure others have commented here - but I've just got the latest core for this and all I get is a garbled type screen.
If you have gamma correction enabled, try disabling it. I had some similar issues with it enabled.
Thx for the quick answer - unfortunately not the case here. Reset all the settings too, did not solve the issue.
Same issue here. I'm connecting my MISTER to an LG TV by HDMI, 1920x1080 and 60Hz settings

Re: X68000 Beta - Updates and Releases

Posted: Fri Dec 10, 2021 6:11 pm
by jca
No problem here on HDMI 1080p 60Hz, 32MB SDRAM. I just updated the core and started it and the OS screen came on. I did not change any setting, I loaded a HDF and started a game, I did the same with D88. So far no difference of behavior, I did not have the time to play any game.

Re: X68000 Beta - Updates and Releases

Posted: Fri Dec 10, 2021 6:23 pm
by pcfreak324
I have the same problem with the garbled type screen. Is it because I use VGA output instead of HDMI? Older builds from puu work fine.