MT32-Pi Not Detected

chriz
Posts: 3
Joined: Fri Jul 09, 2021 1:47 pm

MT32-Pi Not Detected

Unread post by chriz »

Hi Guys,

i am using a RPI4 with the MiSTer MT32-Pi Hat v2.1

Everything is booting up and working in the Display

When I am starting the AO486 Core the Mister Logo does not come up and the Menu is missing.

Any Idea how to debug this?

Chriz
Xbytez
Site Admin
Posts: 469
Joined: Wed May 20, 2020 3:36 pm
Has thanked: 214 times
Been thanked: 787 times

Re: MT32-Pi Not Detected

Unread post by Xbytez »

The github page for setting up the mt32-pi with MiSTer is an excellent place to start, make sure you have setup the .ini files correctly on the RPi micro SD card. The length of the USB3 cable you use is also important, less than 30cms is recommended. Also check which IO board version you have as early IO boards require modification to work correctly, this is also mentioned in the setup guide linked below.

MiSTer FPGA User Port Connection Setup

https://github.com/dwhinham/mt32-pi/wik ... connection

RPi for MiSTer Setup

https://github.com/dwhinham/mt32-pi/wik ... tion#setup

MT32Pi FAQ

https://github.com/dwhinham/mt32-pi/wiki/FAQ

Flynnsbit MiSTer AO486 MT32Pi Setup Integration with MiSTer

https://www.youtube.com/watch?v=GEyNDPc2Bug

Hope these help you get setup.
chriz
Posts: 3
Joined: Fri Jul 09, 2021 1:47 pm

Re: MT32-Pi Not Detected

Unread post by chriz »

Thanks for your support

I just found the Board Version, is a V6, the Cable came with the hat
In my opinon I did all the things you mentioned
so shell i buy a new io board then?
Stupid Dufus
Posts: 152
Joined: Sun Aug 30, 2020 12:04 am
Has thanked: 87 times
Been thanked: 46 times

Re: MT32-Pi Not Detected

Unread post by Stupid Dufus »

I had a similar issue with my mt32pi. OLED would display, but MiSTer wouldn't recognize it the device.

Silly as it is, turned out to I wasn't plugging the USB cable fully in to the mt32pi itself. Ugh. After I pushed it in just a bit further everything worked.

Try that I guess. Ensure you have a good cable.
H6rdc0re
Posts: 52
Joined: Sat Feb 06, 2021 11:35 pm
Has thanked: 1 time
Been thanked: 9 times

Re: MT32-Pi Not Detected

Unread post by H6rdc0re »

Insufficient power from the USB perhaps due to a wrong setting in INI? I had that problem myself.
User avatar
legacypixels
Posts: 91
Joined: Sun May 24, 2020 9:20 pm
Has thanked: 25 times
Been thanked: 25 times

Re: MT32-Pi Not Detected

Unread post by legacypixels »

Do you have an eBay/AliExpress IO board? If so, you may have pins missing on the IO board, see blog post below (not my site)
https://ozmistermods.com/blogs/news/psa ... n-the-wild
US based seller of MiSTer addon boards. Visit https://www.legacypixels.com/mister
chriz
Posts: 3
Joined: Fri Jul 09, 2021 1:47 pm

Re: MT32-Pi Not Detected

Unread post by chriz »

It seems the V6 Board from Ali is not suitable. Just ordered another from UK
User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: MT32-Pi Not Detected

Unread post by venice »

chriz wrote: Fri Jul 09, 2021 1:49 pm Any Idea how to debug this?
...had the same issue.
It was the cable. One line was broken.

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

SpotAnime
Posts: 9
Joined: Mon Mar 15, 2021 10:50 am
Has thanked: 7 times
Been thanked: 2 times

Re: MT32-Pi Not Detected

Unread post by SpotAnime »

I had a similar issue with mine, I could not get to work, tried multiple cables and everything. No display on the OLED at all. My MicroSD card came formatted FAT32, and when it didn't work I reformatted it to see if that was the issue. Sadly, it did not fix the issue. I even tried multiple SD cards. I was starting to think my hat got damaged in transit from the UK. Then when searching troubleshooting I decided to triage my PI 3A+, and I went to the Raspberry Pi page and downloaded the OS installer from there. That program formatted the SD card and installed the OS on the card, including creating the necessary partitions.

Knowing I was in over my head, I stopped there, deleted the partitions and reformatted the card. On a whim, I copied the MT32pi files back on the SD card and inserted it back on my Pi 3A+, booted up MiSTer, turned on the hat and voila! Magically the OLED screen on the hat came to life! It's been working like a charm since.

My take on it is that when the RPi install program formatted the card and created the partitions, that ended up cleaning any leftover data that was causing some issue. Even though I had used guiformat, for some reason that alone didn't do the trick.

Long story short - cables are frequently a problem, but also make sure to check your MicroSD card.
User avatar
marcelosofth
Posts: 171
Joined: Wed Sep 22, 2021 10:03 pm
Location: Brazil - São Paulo
Has thanked: 6 times
Been thanked: 3 times
Contact:

Re: MT32-Pi Not Detected

Unread post by marcelosofth »

SpotAnime, I'm having problems too, my MT32pi is not recognized by Mister and the screen doesn't turn on, do you have the exact link of the program that formatted and installed the operating system on the card?
User avatar
legacypixels
Posts: 91
Joined: Sun May 24, 2020 9:20 pm
Has thanked: 25 times
Been thanked: 25 times

Re: MT32-Pi Not Detected

Unread post by legacypixels »

You should not need any Pi based formatting programs.

0) Format SD Card as FAT-32. You may need a formatting utility if you are a Windows user (see the wiki:https://github.com/dwhinham/mt32-pi/wik ... reparation)
1) Get the latest release from Dale's github and save/unpack to a convenient directory
2) Edit the mt32pi.cfg file (see wiki: https://github.com/dwhinham/mt32-pi/wik ... tion#setup<-- YOU MUST DO THIS!!!!
3) Copy the contents of the githib dir and config file to the root of the sdcard
4) Eject card, insert in the PI and boot. should work.

If you need a pre-edited config file with common MiSTer options set for the standard MiSTer MT32pi , you can get one from my website: http://www.legacypixels.com/docs/mt32-pi.cfg
US based seller of MiSTer addon boards. Visit https://www.legacypixels.com/mister
User avatar
marcelosofth
Posts: 171
Joined: Wed Sep 22, 2021 10:03 pm
Location: Brazil - São Paulo
Has thanked: 6 times
Been thanked: 3 times
Contact:

Re: MT32-Pi Not Detected

Unread post by marcelosofth »

Friend, I correctly configured the "MT32-pi Wiki" including a friend gave me the content of his SD Card that he uses perfectly in his Mister, so the problem with the "mt32-pi.cfg" is not, follow the photo link of my I/O purchased on Aliexpress!

pcb.jpg
pcb.jpg (665.33 KiB) Viewed 11720 times
Post Reply