128MB SDRAM - Possible to solder/install and test one module at a time?

sofakng
Posts: 137
Joined: Fri Jun 19, 2020 12:52 am
Been thanked: 23 times

128MB SDRAM - Possible to solder/install and test one module at a time?

Unread post by sofakng »

It's a little tricky to solder the SDRAM XS-D SDRAM modules, so I was wondering if you could solder one module at a time and run memtest to see if it soldered correctly?

If it tested OK, you could then solder the second module and if any errors occured you would know which module needed to be resoldered/fixed.
flipflop
Posts: 12
Joined: Mon Sep 14, 2020 7:04 pm

Re: 128MB SDRAM - Possible to solder/install and test one module at a time?

Unread post by flipflop »

I read on on the old forum that you can install only U1 and caps and it will work as a 64 Mb board.
Post Reply