The MSTR Case

Showcase builds, discuss cases, embedding MiSTer into existing computer cases.
User avatar
akicus
Posts: 85
Joined: Mon May 25, 2020 8:39 am
Has thanked: 3 times
Been thanked: 69 times

Re: The MSTR Case

Unread post by akicus »

virtuali wrote: Thu May 27, 2021 11:43 am
akicus wrote: Thu May 27, 2021 9:49 amThe cassette will hold the mt32-pi, correct.
Please be sure it will fit both RPI A and B models. While it's likely most mt32-pi users have the A model, I had a spare B model I didn't used, so perhaps others are in the same situation, it would be nice if the case could fit both.
The idea is to make it as universal as possible so we know people use different boards.

Milspex wrote: Thu May 27, 2021 11:52 am I think it's gonna be a little bit expensive but then again I do believe there surely is a big market for a more premium mister case.
We will see what happens. If there is no market for it then me and Mikael will at least have a conversation piece if people come over :lol: .
User avatar
akicus
Posts: 85
Joined: Mon May 25, 2020 8:39 am
Has thanked: 3 times
Been thanked: 69 times

Re: The MSTR Case

Unread post by akicus »

Bits n Stuff wrote: Thu May 27, 2021 3:09 pm
akicus wrote: Wed May 26, 2021 9:40 pm What do people think about using a e-ink color display instead of OLED? It is just a question, not saying we will use it.
Interesting, what would the advantages be in using one rather than the other?
I mean, I know the strengths and weaknesses of both types of display it's more that I'm not really sure if there's a benefit of one over the other in this particular situation.
For me, either is fine. ;)
I mostly thought about it not emitting light like a OLED display does, some people like it more "toned down". The mt32-pi cassette will have a OLED because it needs to display the animated bars properly.
User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: The MSTR Case

Unread post by venice »

At first I was thinking about using an e-ink for my project
C717F50E-BAE8-4919-8E52-B4EF9F896945.jpeg
But no animation possible.
The 3-Color e-ink (with yellow) needs about 25secs for the picture to be shown completely.
That was too long for me.
Red‘s are a bit faster but I like the yellow color.

Btw, the Picture was written to the Display about three months before :)
You do not have the required permissions to view the files attached to this post.

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

User avatar
akicus
Posts: 85
Joined: Mon May 25, 2020 8:39 am
Has thanked: 3 times
Been thanked: 69 times

Re: The MSTR Case

Unread post by akicus »

venice wrote: Thu May 27, 2021 6:41 pm At first I was thinking about using an e-ink for my project

C717F50E-BAE8-4919-8E52-B4EF9F896945.jpeg

But no animation possible.
The 3-Color e-ink (with yellow) needs about 25secs for the picture to be shown completely.
That was too long for me.
Red‘s are a bit faster but I like the yellow color.

Btw, the Picture was written to the Display about three months before :)
Yeah the lack of animation is a problem for sure, if it had that I would consider it for everything.
Being able to hold the image on the display is a great feature of e-ink.
ash2fpga
Posts: 237
Joined: Tue May 26, 2020 6:20 pm
Has thanked: 62 times
Been thanked: 28 times

Re: The MSTR Case

Unread post by ash2fpga »

venice wrote: Thu May 27, 2021 6:41 pm At first I was thinking about using an e-ink for my project
Nice. E-ink is one of those areas I am "watching this space". Right now e-ink kind of reminds me of the first laptop with a color LCD I tried out in the 90s, though (a blurry mess :lol:).
User avatar
akicus
Posts: 85
Joined: Mon May 25, 2020 8:39 am
Has thanked: 3 times
Been thanked: 69 times

Re: The MSTR Case

Unread post by akicus »

Sorry for the lack of updates!
More will come this month...
mr-box
Posts: 31
Joined: Sun May 24, 2020 8:39 pm
Been thanked: 6 times

Re: The MSTR Case

Unread post by mr-box »

can't wait for your next update not buying any mister case into you shows yours
User avatar
robotnoise
Posts: 5
Joined: Sun Sep 06, 2020 2:22 pm

Re: The MSTR Case

Unread post by robotnoise »

Update?
Milspex
Posts: 165
Joined: Wed Jun 10, 2020 6:46 pm
Has thanked: 38 times
Been thanked: 35 times

Re: The MSTR Case

Unread post by Milspex »

robotnoise wrote: Sun Jul 11, 2021 9:57 amUpdate?
See 2 posts above
User avatar
robotnoise
Posts: 5
Joined: Sun Sep 06, 2020 2:22 pm

Re: The MSTR Case

Unread post by robotnoise »

Milspex wrote: Mon Jul 12, 2021 7:51 am
robotnoise wrote: Sun Jul 11, 2021 9:57 amUpdate?
See 2 posts above
Awesome, cant wait.
repente
Posts: 13
Joined: Sat Feb 06, 2021 8:25 am
Been thanked: 12 times

Re: The MSTR Case

Unread post by repente »

Hi guys! Are the project still alive?
mr-box
Posts: 31
Joined: Sun May 24, 2020 8:39 pm
Been thanked: 6 times

Re: The MSTR Case

Unread post by mr-box »

question will this work with 2 ram modules or does this become junk if that happens there might be cores in the future that might use 2 ram modules .
User avatar
akicus
Posts: 85
Joined: Mon May 25, 2020 8:39 am
Has thanked: 3 times
Been thanked: 69 times

Re: The MSTR Case

Unread post by akicus »

Sorry for the late reply folks, project is still alive.
We are ordering some parts and fixing a couple of issues (pcb design) so the time frame is a little off compared to what we first wanted. Update regarding OLED and fixes should come later this month so we will update you accordingly.

Again, sorry for the lack of updates.
grizzly
Posts: 375
Joined: Tue Jun 16, 2020 12:22 pm
Has thanked: 55 times
Been thanked: 76 times

Re: The MSTR Case

Unread post by grizzly »

repente wrote: Wed Aug 25, 2021 3:30 pm Hi guys! Are the project still alive?
I thought everyone know that if any project does not release any news for over an hour it's dead :lol:
Disclamier!!!
This post may cointain some traces of irony! :mrgreen:
User avatar
dennis808
Posts: 7
Joined: Thu Sep 30, 2021 9:44 am
Has thanked: 22 times
Been thanked: 1 time

Re: The MSTR Case

Unread post by dennis808 »

Hello everyone, new to the MiSTer scene (DE10 arrived yesterday) and just registered to post what an awesome case/pcb design this is!
I was wondering what, apart from the aesthetics and the display, the main difference is between this design and RMCretro's MiSTer Multisystem. This seem to cover the same ground, no?
ericcannon
Posts: 3
Joined: Mon May 10, 2021 9:11 pm
Been thanked: 1 time

Re: The MSTR Case

Unread post by ericcannon »

There are actually months in between some of the replies so I think it is time to knock off the "Irony" posts when people are just trying to see if the poject is still moving forward.
ericcannon
Posts: 3
Joined: Mon May 10, 2021 9:11 pm
Been thanked: 1 time

Re: The MSTR Case

Unread post by ericcannon »

Bits n Stuff wrote: Wed May 12, 2021 1:20 am I think with projects like MiSTer it's worth remembering that the vast majority of work done for the project is sone in people's own time rather than being their day to day job. It may be a little more complex with hardware projects too as there's always going to be a lead time when having anything produced and everything seems to run a little slower these days.
Also, people may just want to take a little time off from working on something.
It's a very different thing if you've bought a product from somebody but that's not what this is, it's a project that seems to have progressed steadily over the past few months and I think we get updates and photos pretty steadily.
I'm sure it will have been worth the wait when people eventually get their hands on this. ;)
This is true but there is nothing wrong with asking of the status of the project as well.
Tandy
Posts: 3
Joined: Sun Mar 07, 2021 5:05 pm
Been thanked: 1 time

Re: The MSTR Case

Unread post by Tandy »

This has to be one of the best case designs for the Mister. I would happily wait to purchase this case and I'm sure there are a lot of others who will do the same. It's always exciting to see new updates on this thread but we know how life goes sometimes, especially on hobbies like this. Also hope everyone is doing well and let's keep this place a positive one!
annette
Posts: 100
Joined: Mon Jul 12, 2021 10:02 am
Has thanked: 23 times
Been thanked: 42 times

Re: The MSTR Case

Unread post by annette »

I really like the cps2 style and vibe from your case design i am interested in this setup do you have a project website yet?
mr-box
Posts: 31
Joined: Sun May 24, 2020 8:39 pm
Been thanked: 6 times

Re: The MSTR Case

Unread post by mr-box »

Update on this
Post Reply