Show Us Your MiSTers

Showcase builds, discuss cases, embedding MiSTer into existing computer cases.
annette
Posts: 100
Joined: Mon Jul 12, 2021 10:02 am
Has thanked: 23 times
Been thanked: 42 times

Re: Show Us Your MiSTers

Unread post by annette »

dennis808 wrote: Mon Nov 01, 2021 8:39 pm so I printed this case: https://www.thingiverse.com/thing:2503438
Your slim Mister case looks great.

thank you for this link i will be printing a slim case just like this one.
User avatar
dennis808
Posts: 7
Joined: Thu Sep 30, 2021 9:44 am
Has thanked: 22 times
Been thanked: 1 time

Re: Show Us Your MiSTers

Unread post by dennis808 »

@annette
Thanks :)
Be aware though that the opening for the 32MB SDRAM didn't line up; I had to file away about a centimeter to make it fit. Easily done because the PLA isn't that tough. There is a thread mentioned on the Thingiverse page that has different versions of this case posted. I liked this one the best because is was the smallest, but not without it's problems. Also make sure you have some small self-tapping screws to close the case with. I got my screws from a broken keyboard that I dismantled. Good luck!
ChloeIsFab
Posts: 11
Joined: Mon Nov 01, 2021 4:36 pm
Has thanked: 5 times
Been thanked: 3 times

Re: Show Us Your MiSTers

Unread post by ChloeIsFab »

Did this very early lockdown :)
2.jpg
1.jpg
You do not have the required permissions to view the files attached to this post.
german_user
Posts: 97
Joined: Wed Sep 08, 2021 12:09 pm
Has thanked: 25 times
Been thanked: 13 times

Re: Show Us Your MiSTers

Unread post by german_user »

Looks very nice
lunch_box
Posts: 14
Joined: Sat Jun 27, 2020 7:15 am

Re: Show Us Your MiSTers

Unread post by lunch_box »

Jellybelly wrote: Wed Aug 18, 2021 3:55 pm 3D Printed case, Not the final colour, and a few more tweeks to add (internal sata bay for HDD, vga and audio out), but works for me nicely at the moment, can post OpenSCAD files if anyone wants them and try to remember the BOM.... )
Hey,

Love this case :)

Don’t suppose you have the BOM for the parts you used to put it all together please??

Many thanks
aagsar
Posts: 1
Joined: Wed Jun 24, 2020 8:45 pm
Has thanked: 4 times

Re: Show Us Your MiSTers

Unread post by aagsar »

The Mister Series X.

Made with wood.
A bit rough around the edges :)
And very simple design,with the bare minimum.
You do not have the required permissions to view the files attached to this post.
guddler
Posts: 56
Joined: Sun Aug 09, 2020 8:37 pm
Has thanked: 3 times
Been thanked: 5 times

Re: Show Us Your MiSTers

Unread post by guddler »

Love that Xbox style case, even if you do think it's a bit round around the edges. It's still better than my woodworking skills would be :D

I really should do something with mine rather than the simple top and bottom panels that I have. Ideal would be a tiny Mini ITX box but whether they're worth the price or not, it's not worth (for me) spending that kind of money on one of these ITX boards that are starting to come out.
MostroW
Posts: 323
Joined: Tue Aug 18, 2020 3:32 pm
Has thanked: 140 times
Been thanked: 43 times

Re: Show Us Your MiSTers

Unread post by MostroW »

ChloeIsFab wrote: Wed Nov 03, 2021 9:55 pm Did this very early lockdown :)
Love that case, what case is that?
remowilliams
Posts: 34
Joined: Sun May 24, 2020 7:13 pm
Has thanked: 20 times
Been thanked: 14 times

Re: Show Us Your MiSTers

Unread post by remowilliams »

R5N19r.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
grhmhome
Posts: 4
Joined: Tue Nov 02, 2021 1:09 am
Been thanked: 1 time

Re: Show Us Your MiSTers

Unread post by grhmhome »

My Mister inside a C64 Maxi (TheC64) case.
20211106_204347.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
jawler
Posts: 30
Joined: Sun May 24, 2020 7:02 pm
Has thanked: 2 times
Been thanked: 11 times

Re: Show Us Your MiSTers

Unread post by jawler »

Hi there! i update my MiSTer enclosure with some details 8-)
mister.jpg
You do not have the required permissions to view the files attached to this post.
Vinicius
Posts: 11
Joined: Fri Nov 05, 2021 4:13 am
Has thanked: 53 times
Been thanked: 4 times

Re: Show Us Your MiSTers

Unread post by Vinicius »

guddler wrote: Sun Nov 07, 2021 12:47 pm I really should do something with mine rather than the simple top and bottom panels that I have. Ideal would be a tiny Mini ITX box but whether they're worth the price or not, it's not worth (for me) spending that kind of money on one of these ITX boards that are starting to come out.

I recommend you check this MiSTer Mini ITX Adaptor, I'm thinking whether to use it myself:
https://www.thingiverse.com/thing:4738986
It even includes the IO shield, and the creator [Wickedsun] lists all the extension cables they used. Wickedsun, if you read this, thank you for this amazing creation.

Pic inside the mini-ITX case. Close the case and it will look nice and tidy.

D0TOhoL.jpeg

Edited: I see poster Monoksidec already showed his setup, where he makes good use of the adapter.
viewtopic.php?p=29962#p29962
You do not have the required permissions to view the files attached to this post.
MikkyTee
Posts: 58
Joined: Mon Jan 04, 2021 11:17 am
Has thanked: 48 times
Been thanked: 4 times

Re: Show Us Your MiSTers

Unread post by MikkyTee »

grhmhome wrote: Sun Nov 07, 2021 5:36 pm My Mister inside a C64 Maxi (TheC64) case.
Can you post an inside snap? Just wondering how you set it up :)
warham
Posts: 31
Joined: Sat Aug 01, 2020 11:29 pm
Been thanked: 7 times

Re: Show Us Your MiSTers

Unread post by warham »

mLGxp8A.jpg
bNcOTi5.jpg

Updated mt32 design with larger screen from ken at legacy pixels
You do not have the required permissions to view the files attached to this post.
ChloeIsFab
Posts: 11
Joined: Mon Nov 01, 2021 4:36 pm
Has thanked: 5 times
Been thanked: 3 times

Re: Show Us Your MiSTers

Unread post by ChloeIsFab »

MostroW wrote: Sun Nov 07, 2021 1:45 pm
ChloeIsFab wrote: Wed Nov 03, 2021 9:55 pm Did this very early lockdown :)
Love that case, what case is that?
Thank you, was just a generic itx case from either ali express or amazon (think it was available on both). Not sure if I am allowed to link stuff but can be easily found with the keywords "itx case aluminium". I drilled out the single power switch plus a few more for the input buttons, and added the led switches. I added in a 3d printed mb tray to hold my mister stack and used breakout cables to two usb sockets built in to the side and to a 3d printed IO shield on the back for more usb, hdmi, power and network. It is just tall enough to fit the usb board/de10nano/mister io board without needing to split them. I wanted a minimal clean design and i think it worked very well. I think a bit of my inspiration was HAL9000 :) hehe
lukethemaker
Posts: 3
Joined: Tue Oct 26, 2021 7:16 pm

Re: Show Us Your MiSTers

Unread post by lukethemaker »

Paz8vy8.jpg

Here's my setup. It has everything I need. 8BitDo M30, N30 and SN30 2.4GHZ controllers on the controller roller I designed. Not pictured is the 8bitdo arcade stick. All of the receivers are built into the case.

I love the iPad screen.
You do not have the required permissions to view the files attached to this post.
User avatar
BlockABoots
Posts: 43
Joined: Wed May 27, 2020 8:21 pm
Has thanked: 7 times

Re: Show Us Your MiSTers

Unread post by BlockABoots »

ObT9nFV.jpg

Such a nice compact design with a power button and Sega Saturn Analog video output!!
You do not have the required permissions to view the files attached to this post.
drgruney
Posts: 28
Joined: Sat Sep 19, 2020 6:03 pm
Has thanked: 48 times
Been thanked: 4 times

Re: Show Us Your MiSTers

Unread post by drgruney »

BlockABoots wrote: Fri Nov 12, 2021 1:21 pm Such a nice compact design with a power button and Sega Saturn Analog video output!!
What board is that?!
User avatar
emmadness
Posts: 29
Joined: Sun May 24, 2020 6:48 pm
Location: Argentina
Been thanked: 1 time
Contact:

Re: Show Us Your MiSTers

Unread post by emmadness »

This is my setup:

> Ultimate MiSTer PRO.
> Dell UltraSharp 1708FP.
> Custom Fighstick w/spinner Made in Argentina!

Sanwa joystick + American type buttons. :geek:

Mi-STer-Setup.jpg
You do not have the required permissions to view the files attached to this post.
BlackSpy
Posts: 20
Joined: Tue Jun 01, 2021 7:52 am
Has thanked: 1 time
Been thanked: 3 times

Re: Show Us Your MiSTers

Unread post by BlackSpy »

jawler wrote: Thu Oct 28, 2021 4:01 pm
lomdar67 wrote: Thu Oct 28, 2021 2:28 pm
Sartis wrote: Sun Oct 17, 2021 4:00 am

Can you provide us the link to the case and the parts used for your build? That case is AWESOME!!
Yes please provides us with a link. I couldn't find it on Aliexpress. It's almost perfect, I just would want to include the MT32pi
Hello!!! you can buy it here https://www.aliexpress.com/store/911238071
I thought about including the mt32-pi inside the box but I discarded it because of what it occupied and because of the ease of changing the system in the future.
Cheers!
Anyone fancy a UK group order?
jvas
Posts: 47
Joined: Tue Aug 25, 2020 8:15 am
Has thanked: 5 times
Been thanked: 2 times

Re: Show Us Your MiSTers

Unread post by jvas »

Not the smallest case
257235516_271194518300132_4680754000217436110_n.jpg
257357703_215460637385361_8483707437226538295_n.jpg
256423592_942302949970675_1647764753537742636_n.jpg
256400173_670594011015891_7581395754843227143_n.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: Show Us Your MiSTers

Unread post by venice »

Looks nice and has enough space for more internal hardware (hdd/joystick adpter).
The connector box looks great.

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

Murderface1982
Posts: 48
Joined: Wed Aug 26, 2020 5:47 pm
Been thanked: 2 times

Re: Show Us Your MiSTers

Unread post by Murderface1982 »

emmadness wrote: Fri Nov 12, 2021 4:54 pm This is my setup:

> Ultimate MiSTer PRO.
> Dell UltraSharp 1708FP.
> Custom Fighstick w/spinner Made in Argentina!

Sanwa joystick + American type buttons. :geek:


Sick. Do you have a link for the stick?
User avatar
emmadness
Posts: 29
Joined: Sun May 24, 2020 6:48 pm
Location: Argentina
Been thanked: 1 time
Contact:

Re: Show Us Your MiSTers

Unread post by emmadness »

Murderface1982 wrote: Mon Nov 15, 2021 8:47 am Sick. Do you have a link for the stick?
Japan Sanwa Joystick Red JLF-TP-8YT-SK & GT-Y & Harness Video Arcade Parts
Same seller, bought in 2019. You can ask for different profiles of restrictors; I use the octagonal and it works great for practically any game.
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: Show Us Your MiSTers

Unread post by antoniovillena »

I have released MiSTer PLUS model. Thanks to Lu's Retro for the review.

https://www.youtube.com/watch?v=8NzVBdlwbgg
User avatar
LamerDeluxe
Top Contributor
Posts: 1160
Joined: Sun May 24, 2020 10:25 pm
Has thanked: 798 times
Been thanked: 257 times

Re: Show Us Your MiSTers

Unread post by LamerDeluxe »

I've added an RGB fan to my MiSTer. It works really well in combination with the existing LEDs. It changes colors smoothly with some nice looking color gradients. I shortened the lead and added a new connector to it. More info in the description.
User avatar
Sorgelig
Site Admin
Posts: 877
Joined: Thu May 21, 2020 9:49 pm
Has thanked: 2 times
Been thanked: 211 times

Re: Show Us Your MiSTers

Unread post by Sorgelig »

17418.jpg
17432.jpg
17420.jpg
17427.jpg
17426.jpg
New version of case with 2.5" removable enclosure upgrade.
You do not have the required permissions to view the files attached to this post.
Xbytez
Site Admin
Posts: 469
Joined: Wed May 20, 2020 3:36 pm
Has thanked: 214 times
Been thanked: 787 times

Re: Show Us Your MiSTers

Unread post by Xbytez »

Sorgelig wrote: Tue Nov 30, 2021 12:04 pm New version of case with 2.5" removable enclosure upgrade.
Looking excellent, that is an impressive large volume print for a resin printer!
User avatar
darksakul
Posts: 352
Joined: Mon May 25, 2020 4:34 pm
Has thanked: 397 times
Been thanked: 73 times

Re: Show Us Your MiSTers

Unread post by darksakul »

I also love the NES cart slot.
It is my great regret that we live in an age that is proud of machines that think and suspicious of people who try to.
User avatar
NinjaWarrior
Posts: 38
Joined: Fri Nov 19, 2021 11:48 pm
Has thanked: 22 times
Been thanked: 14 times

Re: Show Us Your MiSTers

Unread post by NinjaWarrior »

Here is my TheVic20 implementation. The specs:

Terasic DE10 Nano - IO Board - 128 MB SDRAM - I2S mod - 500GB SDD - MT32Pi OLED - 10 USB
Vic20Supercharged1.jpg
Vic20Supercharged3.jpg
Vic20Supercharged2.jpg
You do not have the required permissions to view the files attached to this post.
Post Reply