Show Us Your MiSTers

Showcase builds, discuss cases, embedding MiSTer into existing computer cases.
User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: Show Us Your MiSTers

Unread post by venice »

Derick2k wrote: Sun Oct 25, 2020 2:54 am After seeing so many great cases I decided to jump in and put one together.
...
Very nice built.
Just a question about the SD Breakout as I am thinking about to use such an adpater as well.

Is the SD working normal?
I read about reduced speed or general sd card detection problems if you use such an SD breakout adapter.

Cheers

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

Derick2k
Posts: 5
Joined: Mon Jul 06, 2020 9:22 pm
Has thanked: 1 time
Been thanked: 2 times

Re: Show Us Your MiSTers

Unread post by Derick2k »

venice wrote: Sat Oct 31, 2020 11:35 am
Derick2k wrote: Sun Oct 25, 2020 2:54 am After seeing so many great cases I decided to jump in and put one together.
...
Very nice built.
Just a question about the SD Breakout as I am thinking about to use such an adpater as well.

Is the SD working normal?
I read about reduced speed or general sd card detection problems if you use such an SD breakout adapter.

Cheers
It's a micro sd to sd extender, so I haven't noticed any differences in its use/speed? You could use a micro sd to micros sd extender, but I like the full sd card size.
User avatar
aberu
Core Developer
Posts: 1144
Joined: Tue Jun 09, 2020 8:34 pm
Location: Longmont, CO
Has thanked: 244 times
Been thanked: 388 times
Contact:

Re: Show Us Your MiSTers

Unread post by aberu »

Derick2k wrote: Mon Nov 02, 2020 6:17 pm
venice wrote: Sat Oct 31, 2020 11:35 am
Derick2k wrote: Sun Oct 25, 2020 2:54 am After seeing so many great cases I decided to jump in and put one together.
...
Very nice built.
Just a question about the SD Breakout as I am thinking about to use such an adpater as well.

Is the SD working normal?
I read about reduced speed or general sd card detection problems if you use such an SD breakout adapter.

Cheers
It's a micro sd to sd extender, so I haven't noticed any differences in its use/speed? You could use a micro sd to micros sd extender, but I like the full sd card size.
To expand on this, there could be a noticeable reduction in bandwidth as a result of there being lower capabilities of the cable AND a reduction in latency using such a cable, but it's highly unlikely that this impacts the performance of the MiSTer as the files you are loading and interacting with are much smaller than something like 8k resolution raw images.
birdybro~
mike4t5
Posts: 4
Joined: Sun May 24, 2020 9:40 pm
Been thanked: 3 times

Re: Show Us Your MiSTers

Unread post by mike4t5 »

Hi all, I recently got myself a 3d printer so I thought it would be a good opportunity to make my own case for the mister. I didn't want to go for the tried and tested 3d printed cases as I wanted a power button and for it to feel a bit more finished. I came up with this design. Hope you like it.
20201109_231558.jpg
20201109_231637.jpg
20201109_231751.jpg
You do not have the required permissions to view the files attached to this post.
ARCADEAGES
Posts: 63
Joined: Sun May 24, 2020 11:58 pm
Location: Toronto
Has thanked: 106 times
Been thanked: 10 times
Contact:

Re: Show Us Your MiSTers

Unread post by ARCADEAGES »

mike4t5 wrote: Mon Nov 09, 2020 11:31 pm Hi all, I recently got myself a 3d printer so I thought it would be a good opportunity to make my own case for the mister. I didn't want to go for the tried and tested 3d printed cases as I wanted a power button and for it to feel a bit more finished. I came up with this design. Hope you like it.
Two fans?
User avatar
Newsdee
Top Contributor
Posts: 830
Joined: Mon May 25, 2020 1:07 am
Has thanked: 98 times
Been thanked: 209 times

Re: Show Us Your MiSTers

Unread post by Newsdee »

Input and output airflow I guess?
mike4t5
Posts: 4
Joined: Sun May 24, 2020 9:40 pm
Been thanked: 3 times

Re: Show Us Your MiSTers

Unread post by mike4t5 »

ARCADEAGES wrote: Tue Nov 10, 2020 2:23 pm
mike4t5 wrote: Mon Nov 09, 2020 11:31 pm Hi all, I recently got myself a 3d printer so I thought it would be a good opportunity to make my own case for the mister. I didn't want to go for the tried and tested 3d printed cases as I wanted a power button and for it to feel a bit more finished. I came up with this design. Hope you like it.
Two fans?
Yeah haha, I know its way over kill but I had one of the fans in another case I designed and I didn't have anything else to do with it. Plus more air flow never hurts.
Newsdee wrote: Tue Nov 10, 2020 3:11 pm Input and output airflow I guess?
Yeah that's right! In through the top and out the back.
louksd
Posts: 9
Joined: Wed Sep 02, 2020 11:56 am
Has thanked: 11 times
Been thanked: 2 times

Re: Show Us Your MiSTers

Unread post by louksd »

My MiSTer case is a bit oversized, and I'm not finished assembling it yet, but you can see it tucked inside before I put the last cover panel in the front:
20201108_192557.jpg
Note, the back of my MiSTer case will have six dresser drawers in the back for clothes, and a small cabinet space for shoes and sundries...the side panels open like doors and the drawers will pull out the side.

Airflow is limited, but there is a decent volume of space around it to prevent heat soak.
You do not have the required permissions to view the files attached to this post.
grizzly
Posts: 375
Joined: Tue Jun 16, 2020 12:22 pm
Has thanked: 55 times
Been thanked: 76 times

Re: Show Us Your MiSTers

Unread post by grizzly »

Looks good and a nice idé to turn it into a "The MiSTer DreSSer" (i think i would make a sticker/paint that name on it).
Did you cut the plywood yourself or is it a kit?
louksd
Posts: 9
Joined: Wed Sep 02, 2020 11:56 am
Has thanked: 11 times
Been thanked: 2 times

Re: Show Us Your MiSTers

Unread post by louksd »

I used the router path for Moon Patrol from Classic Arcade Cabinets, generated a list of circle centers and radii from the corner along with starting and ending lengths along the edges, and re-derived the outline on the plywood, laying a straightedge along the tangents. I then clamped down jigsaw guides offset to those lines, cut the profile for each straight, then cleaned up the corners and edges with a router. The first side took about 5 hours, and the second one took about 45 minutes...I just used the router to copy it like a key at the hardware store!

It was actually rather fun to layout and a little stressful on cutting to make sure I didn't encroach into the profile, but it was really satisfying!
There isn't a single screw in the frame, either...it's all dowels and biscuits!
louksd
Posts: 9
Joined: Wed Sep 02, 2020 11:56 am
Has thanked: 11 times
Been thanked: 2 times

Re: Show Us Your MiSTers

Unread post by louksd »

Frame.jpg
The entire frame is free-standing without the side panels. The drawers will go in the openings at the top, bottom, and just underneath the control panel mounting platform. The hardware installation is obviously unfinished in this image - no keyboard will be necessary and the power supply will be mounted on the ceiling of that section.
You do not have the required permissions to view the files attached to this post.
grizzly
Posts: 375
Joined: Tue Jun 16, 2020 12:22 pm
Has thanked: 55 times
Been thanked: 76 times

Re: Show Us Your MiSTers

Unread post by grizzly »

louksd wrote: Mon Nov 16, 2020 8:44 pm There isn't a single screw in the frame, either...it's all dowels and biscuits!
Show off :mrgreen:
mcoobe
Posts: 2
Joined: Tue Jun 09, 2020 9:45 pm

Re: Show Us Your MiSTers

Unread post by mcoobe »

metalmister2.jpg
You do not have the required permissions to view the files attached to this post.
mcoobe
Posts: 2
Joined: Tue Jun 09, 2020 9:45 pm

Re: Show Us Your MiSTers

Unread post by mcoobe »

[media][/media]
You do not have the required permissions to view the files attached to this post.
User avatar
venice
Top Contributor
Posts: 739
Joined: Tue Jun 16, 2020 9:29 am
Location: Germany
Has thanked: 264 times
Been thanked: 261 times

Re: Show Us Your MiSTers

Unread post by venice »

venice wrote: Sat Oct 17, 2020 5:05 pm At Amazon I found an 90° USB 3.0 Adapter and the needed breakout cable for an external SNAC Port but this function is still untested.
I finalized my SNAC Board.
And as I have enough space in the case i simply put it inside ;), between the two USB Adapters.
Mega Drive and SNES Controller are working well :D

Snac_in_Case_with_Front.jpg
You do not have the required permissions to view the files attached to this post.

My MiSTer Add-On-Projects tty2oled, i2c2oled, SNAC2IEC
You can donate by sending a Postcard to me.

User avatar
belgarcat
Posts: 26
Joined: Sun May 24, 2020 9:39 pm
Location: Catalonia
Has thanked: 6 times
Been thanked: 11 times

Re: Show Us Your MiSTers

Unread post by belgarcat »

B1BE7A66-0017-43BA-9024-78169D6F5E59.jpeg
33878BE2-6D95-441B-861E-A41ACE99098E.jpeg
574B3FE1-5316-4603-AB97-139908FDDF3F.jpeg
2A3E049F-9AC6-4EA1-9379-8F23DF19BFB9.jpeg
You do not have the required permissions to view the files attached to this post.
User avatar
lamarax
Top Contributor
Posts: 472
Joined: Wed Nov 11, 2020 6:28 pm
Has thanked: 33 times
Been thanked: 199 times

Re: Show Us Your MiSTers

Unread post by lamarax »

belgarcat wrote: Sat Nov 28, 2020 11:30 am[insert mind blowing MiSTer arrangement]
This is f'n awesome!!

Maybe a complete run down is in order? (well except for the proprietary .stl files of course, if you don't want to share)

[Edit] I mean what's the size of that LCD panel, specs, where'd you get it, speakers etc. Details man, details! :P
User avatar
belgarcat
Posts: 26
Joined: Sun May 24, 2020 9:39 pm
Location: Catalonia
Has thanked: 6 times
Been thanked: 11 times

Re: Show Us Your MiSTers

Unread post by belgarcat »

Thanks!
About the screen, it's an iPad screen with a controller board you can find in Aliexpress or ebay. Some info in this thread:
viewtopic.php?p=6344#p6344
I will make adjustments to the 3d model, it's not finished yet.
The stand is downloaded from thingiverse.
https://www.thingiverse.com/thing:3808242
ellie
Posts: 19
Joined: Tue Nov 03, 2020 8:20 pm
Been thanked: 2 times

Re: Show Us Your MiSTers

Unread post by ellie »

belgarcat wrote: Sat Nov 28, 2020 11:30 am nice setup!
Very cute! what kind of PSU are you using? It looks like that black box up top is a step up or step down converter? I have an iPad screen I'm building and a MiSTer I've finished, and I'm using a 12v 60w power supply to power the screen (12v x 2-3a = 24-36w), and it also goes to a 12v -> 5v 5a step down converter that powers the MiSTer and a little amp for speakers.

A couple questions: are you using the "digital" speaker outs from the LCD driver board (the little four pin JST connector)? Is the volume just controlled through the OSD? I want to preserve my headphone out on the board, but I also want hardware volume control for the speaker, so I'm using a tiny amp with a volume control. And you don't happen to have a pinout (or know how to work out a pinout) for the little remote control for the board, do you? It's a weird shape and tough for me to mount, so I thought I might make my own, but I don't know completely what I'm doing with that. I assume momentary switches going to ground or 5v would work?
User avatar
belgarcat
Posts: 26
Joined: Sun May 24, 2020 9:39 pm
Location: Catalonia
Has thanked: 6 times
Been thanked: 11 times

Re: Show Us Your MiSTers

Unread post by belgarcat »

ellie wrote: Mon Nov 30, 2020 2:01 am Very cute! what kind of PSU are you using? It looks like that black box up top is a step up or step down converter? I have an iPad screen I'm building and a MiSTer I've finished, and I'm using a 12v 60w power supply to power the screen (12v x 2-3a = 24-36w), and it also goes to a 12v -> 5v 5a step down converter that powers the MiSTer and a little amp for speakers.
I'm using a 12V 3A power supply. Yes, the black box is a step down converter (12V to 5V)
ellie wrote: Mon Nov 30, 2020 2:01 am A couple questions: are you using the "digital" speaker outs from the LCD driver board (the little four pin JST connector)? Is the volume just controlled through the OSD? I want to preserve my headphone out on the board, but I also want hardware volume control for the speaker, so I'm using a tiny amp with a volume control.
Yes, the speakers are connected directly to the 4pin JST connector of the screen controller board. The volume is great! The vol up/down is controlled through the OSD, it can always be refined in the MiSTer OSD (Core Volume). It would be great to find a way to have hardware buttons to control it, I've searched for it but I haven't found anything. If somebody comes up with something, i will be more than happy to include it.
ellie wrote: Mon Nov 30, 2020 2:01 am And you don't happen to have a pinout (or know how to work out a pinout) for the little remote control for the board, do you? It's a weird shape and tough for me to mount, so I thought I might make my own, but I don't know completely what I'm doing with that. I assume momentary switches going to ground or 5v would work?
About the controller, i'm designing my own board (my first time designing a pcb!) to include the MiSTer on/off switch and the three MiSTer buttons.
Board2.JPG
To learn about the pinout of the board you can check it with a multimeter in continuity mode. This is what I found.
Schema.JPG
Pin8 would be the closest to the CN1 text on the board. I've switched pins 5 and 6 to maintain the same order of the buttons and the order of the icons in the screen's OSD. (For example if you check my first picture, you'll see the green and yellow cables are switched. With the board I'm designing this won't be necessary)
You do not have the required permissions to view the files attached to this post.
ellie
Posts: 19
Joined: Tue Nov 03, 2020 8:20 pm
Been thanked: 2 times

Re: Show Us Your MiSTers

Unread post by ellie »

You’re the best! Thanks so much for the control diagram; it makes perfect sense. For your volume control: it isn’t buttons, but what about just a stereo 10k audio pot? You have me thinking I don’t need my extra amp, and that’s what I’m planning on doing. I know normally your volume pot comes pre-power amp, but it’s such low wattage that I doubt it matters here.
PauloCastor
Posts: 6
Joined: Sun Jun 28, 2020 2:13 pm
Has thanked: 1 time
Been thanked: 1 time

Re: Show Us Your MiSTers

Unread post by PauloCastor »

belgarcat wrote: Sat Nov 28, 2020 11:30 am
Beautiful work
louksd
Posts: 9
Joined: Wed Sep 02, 2020 11:56 am
Has thanked: 11 times
Been thanked: 2 times

Re: Show Us Your MiSTers

Unread post by louksd »

I'm a sucker for "all-in-one" designs, and this one is very clean! Excellent use of display, and the custom PCB is a really nice way to stay tidy. Inspiring work!
Atfnet
Posts: 10
Joined: Mon May 25, 2020 7:17 am
Has thanked: 2 times
Been thanked: 5 times

Re: Show Us Your MiSTers

Unread post by Atfnet »

Derick2k wrote: Sun Oct 25, 2020 2:54 am After seeing so many great cases I decided to jump in and put one together. All off the shelf parts with some acrylic mounting plates I cut. I didn't want to solder much/remove headers, etc..just wanted to do it quickly, if I would have gone with a custom wire job I could have put it in a much smaller case, a bit more neatly. Went a large 120mm fan, very quiet while moving massive air, didn't make sense to pay almost the same price for the smaller 40mm fan from Noctua. Now to actually turn it on, hopefully, it doesn't go up in smoke :lol:
I love your design what is the make and model of the case ?
User avatar
xtcrefugee
Posts: 19
Joined: Wed Sep 09, 2020 3:57 pm
Has thanked: 4 times

Re: Show Us Your MiSTers

Unread post by xtcrefugee »

AluMiSTer.jpg
You do not have the required permissions to view the files attached to this post.
vampsthevampyre
Posts: 12
Joined: Tue Jun 16, 2020 2:14 pm
Has thanked: 11 times

Re: Show Us Your MiSTers

Unread post by vampsthevampyre »

AluMiSTer looks fantastic need more details
User avatar
xtcrefugee
Posts: 19
Joined: Wed Sep 09, 2020 3:57 pm
Has thanked: 4 times

Re: Show Us Your MiSTers

Unread post by xtcrefugee »

vampsthevampyre wrote: Sat Dec 12, 2020 4:10 pm AluMiSTer looks fantastic need more details
It's the new aluminium case Porkchop Express (misteraddons.com) has just started selling, I just finished putting mine together.
https://misteraddons.com/blogs/news/same-but-different
User avatar
lamarax
Top Contributor
Posts: 472
Joined: Wed Nov 11, 2020 6:28 pm
Has thanked: 33 times
Been thanked: 199 times

Re: Show Us Your MiSTers

Unread post by lamarax »

This looks ace!
...but no provision for the BlisSster board unfortunately :(
maxxsun
Posts: 3
Joined: Mon May 25, 2020 8:32 am
Has thanked: 1 time
Been thanked: 7 times

Re: Show Us Your MiSTers

Unread post by maxxsun »

my case. :D :D

hUEpsO4DzqxM5dY.jpg
DJjZ39lpzEcvLuV.jpg
FAZbBRofLEeHyNp.jpg
pJZzcdMoSL9eQ4I.jpg
S61N7c5Betv2fLl.jpg
5hsi8WIwvCFJbY4.jpg
You do not have the required permissions to view the files attached to this post.
MostroW
Posts: 323
Joined: Tue Aug 18, 2020 3:32 pm
Has thanked: 140 times
Been thanked: 43 times

Re: Show Us Your MiSTers

Unread post by MostroW »

Now that is pure art, using a custom pcb in that gamecube casing, nice work!
Post Reply