antoniovillena.es

Only for official MiSTer project addon boards!
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: antoniovillena.es

Unread post by antoniovillena »

I have ordered with these files on jlcpcb.com
Attachments
bom_cpl.zip
(854 Bytes) Downloaded 299 times
VegitoXZ7
Posts: 3
Joined: Thu Sep 10, 2020 6:54 pm

Re: antoniovillena.es

Unread post by VegitoXZ7 »

Those files don't seem to be working with the gerber file I downloaded from your post on that forum.
Is there a different gerber file that is updated for this bom and cpl?

For clarification, I included the gerber file i downloaded from your post on the other forum. Thanks!
Attachments
snac.zip
(91.6 KiB) Downloaded 320 times
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: antoniovillena.es

Unread post by antoniovillena »

Use these gerbers instead. I changed the orientation of the board
Attachments
db9tg.zip
(24.78 KiB) Downloaded 315 times
User avatar
NML32
Posts: 288
Joined: Sun May 24, 2020 6:57 pm
Has thanked: 272 times
Been thanked: 43 times

Re: antoniovillena.es

Unread post by NML32 »

Can a MiSTer RTC board be installed in the Complete MiSTer DRIVE 128MB, 8GB uSD setup?
boilop
Posts: 12
Joined: Wed Aug 05, 2020 4:49 am

Re: antoniovillena.es

Unread post by boilop »

I was finally going to my dream MiSTer kit from you, but it seems like you only sell it with SDRAM now... (BTW, bug report: the announce still says "This kit doesn’t include DE10 nano or SDRAM module.", even though that is no longer true. Is there any chance you would consider still selling a kit without SDRAM?
Pepeart
Posts: 74
Joined: Thu Sep 17, 2020 3:21 am
Has thanked: 59 times
Been thanked: 5 times

Re: antoniovillena.es

Unread post by Pepeart »

Im having problems with my nes adapter. I added the 2 3.6k resistors and same problem as without resistors. What am I doing wrong? I tried the scac and db9 settings too
Attachments
1E6DDFCF-CF6B-491C-AD73-6FCF4FF7C545.jpeg
1E6DDFCF-CF6B-491C-AD73-6FCF4FF7C545.jpeg (2.33 MiB) Viewed 17995 times
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: antoniovillena.es

Unread post by antoniovillena »

NML32 wrote: Sun Sep 20, 2020 6:53 pm Can a MiSTer RTC board be installed in the Complete MiSTer DRIVE 128MB, 8GB uSD setup?
I have not tried. Probably not. But I am developing a RTC module for my setup.
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: antoniovillena.es

Unread post by antoniovillena »

boilop wrote: Mon Sep 21, 2020 4:05 am I was finally going to my dream MiSTer kit from you, but it seems like you only sell it with SDRAM now... (BTW, bug report: the announce still says "This kit doesn’t include DE10 nano or SDRAM module.", even though that is no longer true. Is there any chance you would consider still selling a kit without SDRAM?
Yes. You are the 3rd person who ask about kit without SDRAM so I send now both options:

https://www.antoniovillena.es/store/product/kit-mister/
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: antoniovillena.es

Unread post by antoniovillena »

Pepeart wrote: Mon Sep 21, 2020 8:38 pm Im having problems with my nes adapter. I added the 2 3.6k resistors and same problem as without resistors. What am I doing wrong? I tried the scac and db9 settings too
Are the other end of resistor tied to VCC (5V)? I don't appreciate in the picture. You have the schematic here:

https://github.com/antoniovillena/MiSTe ... db9nes.pdf
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: antoniovillena.es

Unread post by antoniovillena »

I hope this image can help
Attachments
nes.png
nes.png (49.16 KiB) Viewed 17981 times
Pepeart
Posts: 74
Joined: Thu Sep 17, 2020 3:21 am
Has thanked: 59 times
Been thanked: 5 times

Re: antoniovillena.es

Unread post by Pepeart »

Thats how I have it. Lower left point 5V to the 2nd and 3rd points on the second row. I ordered 3.6k 1/4 watt 5% tolerance. Did I get the correct resistors?
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: antoniovillena.es

Unread post by antoniovillena »

Pepeart wrote: Mon Sep 21, 2020 11:02 pm Thats how I have it. Lower left point 5V to the 2nd and 3rd points on the second row. I ordered 3.6k 1/4 watt 5% tolerance. Did I get the correct resistors?
Yes. Resistors are ok. Have you trying with SNAC option on OSD, right?
Pepeart
Posts: 74
Joined: Thu Sep 17, 2020 3:21 am
Has thanked: 59 times
Been thanked: 5 times

Re: antoniovillena.es

Unread post by Pepeart »

Yes, I tried all 3 modes. Snac, DB9 & 15. On mode 15.
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: antoniovillena.es

Unread post by antoniovillena »

Pepeart wrote: Mon Sep 21, 2020 11:50 pm Yes, I tried all 3 modes. Snac, DB9 & 15. On mode 15.
Try with this core and SNAC

https://github.com/MiSTer-devel/NES_MiS ... 200620.rbf
Pepeart
Posts: 74
Joined: Thu Sep 17, 2020 3:21 am
Has thanked: 59 times
Been thanked: 5 times

Re: antoniovillena.es

Unread post by Pepeart »

Same problem, only the A button works. All the other adapters work great.
boilop
Posts: 12
Joined: Wed Aug 05, 2020 4:49 am

Re: antoniovillena.es

Unread post by boilop »

Could you explain how you wire the VGA port?

1. I know that you output sound with it (since your VGA to Scart has sound), and I would like to know on which pins that is. I would like to make sure that I can use a cable like this (https://www.extron.com/product/syvgamalefibncmaleca) to go to my PVM without any trouble (I do understand that this cable wouldn't carry sound, of course).

2. An additional question about your VGA to Scart: do you have a 470 Ohm resistor on the VGA HSYNC pin when going to the scart CSYNC pin?

Thanks for your help!
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: antoniovillena.es

Unread post by antoniovillena »

boilop wrote: Wed Sep 23, 2020 5:44 pm Could you explain how you wire the VGA port?

1. I know that you output sound with it (since your VGA to Scart has sound), and I would like to know on which pins that is. I would like to make sure that I can use a cable like this (https://www.extron.com/product/syvgamalefibncmaleca) to go to my PVM without any trouble (I do understand that this cable wouldn't carry sound, of course).
left channel is on pin 11, right channel is on shield
boilop wrote: Wed Sep 23, 2020 5:44 pm 2. An additional question about your VGA to Scart: do you have a 470 Ohm resistor on the VGA HSYNC pin when going to the scart CSYNC pin?

Thanks for your help!
I don't connect hsync to sync. I do a XOR between hsync and vsync and then I put a potentiometer of 1K
Pepeart
Posts: 74
Joined: Thu Sep 17, 2020 3:21 am
Has thanked: 59 times
Been thanked: 5 times

Re: antoniovillena.es

Unread post by Pepeart »

The Nes Adapter its working now. Thank you for all your help Antonio.
Squaresoft74
Posts: 9
Joined: Wed Sep 23, 2020 1:18 am
Been thanked: 1 time

Re: antoniovillena.es

Unread post by Squaresoft74 »

I recently bought a complete MiSTer DRIVE 128MB, 8GB uSD from Antonio.
It took only 7 days to get delivered perfectly packed.
i had a minor issue with the potentiometer controlling the fan not working but he sent me a complete IOUSB replacement board in about 4 days.

Based on my own experience, i'd highly recommend this great and responsive seller. :)
mahen
Posts: 185
Joined: Sun May 24, 2020 8:25 pm
Has thanked: 19 times
Been thanked: 6 times

Re: antoniovillena.es

Unread post by mahen »

Just received a new parcel from Antonio. Fast dispatch, perfect condition, some nice goodies provided (VGA -> Scart adapter). Great work, thanks again :)
arcam10
Posts: 3
Joined: Sat Oct 10, 2020 9:31 am

Re: antoniovillena.es

Unread post by arcam10 »

Hello Antonio, I am really interested in your "Complete MiSTer DRIVE 128MB, 8GB uSD" product! What is the difference with the SLIM edition?
Does the scart adapter in the package come with stereo sound?
antoniovillena
Posts: 137
Joined: Sun May 24, 2020 8:11 pm
Has thanked: 2 times
Been thanked: 48 times

Re: antoniovillena.es

Unread post by antoniovillena »

arcam10 wrote: Sat Oct 10, 2020 9:47 am Hello Antonio, I am really interested in your "Complete MiSTer DRIVE 128MB, 8GB uSD" product! What is the difference with the SLIM edition?
Does the scart adapter in the package come with stereo sound?
The only difference is the size (DRIVE is 12mm higher) and the orientation of 2 USB connectors (DRIVE has 2 internal and 5 external USB ports).

Yes. The Scart adapter (also the cable) comes with stereo sound.
arcam10
Posts: 3
Joined: Sat Oct 10, 2020 9:31 am

Re: antoniovillena.es

Unread post by arcam10 »

Hello Antonio,
I ordered your kit, but I can't figure out the modification power button mod. Do you have additional pictures? I cannot visualize correctly the modification.
arcam10
Posts: 3
Joined: Sat Oct 10, 2020 9:31 am

Re: antoniovillena.es

Unread post by arcam10 »

Hello Antonio,

Can your confirm if i understand your power switch mod ?

Nano-10.JPG
Nano-10.JPG (89.46 KiB) Viewed 20378 times
Best regards,
dshadoff
Core Developer
Posts: 534
Joined: Sun May 24, 2020 9:30 pm
Has thanked: 19 times
Been thanked: 141 times

Re: antoniovillena.es

Unread post by dshadoff »

Antonio, I received a composite adapter today, and I'm having trouble getting it past the 50% working point.
I've modified mister.ini for composite_sync=1, disabled SOG, and put the VGA header to 5V as the webpage stated.

However, the picture flashes on for about 2 seconds, then off for about 2 seconds, then back on (etc.).
This is not a characteristic of the monitor itself (a Commodore 1701) - if it lost sync, it would twist into a horizontal mess - rather, the connection/disconnection seems to be upstream at the adapter and MiSTer.

When the picture appears, it seems to have no other problems, so it is likely just a configuration option of some sort.

Do you have any suggestions on how this can be rectified ?
mahen
Posts: 185
Joined: Sun May 24, 2020 8:25 pm
Has thanked: 19 times
Been thanked: 6 times

Re: antoniovillena.es

Unread post by mahen »

Ah, so the DRIVE version has 2 internal ports and 5 external ones instead of 7 external ports ?

The SSD is to be plugged into one of those internal USB ports and the 2nd one is for its power supply ?

OK so the DRIVE version has pros & cons... Love the SLIM version !
User avatar
gusmoney
Posts: 8
Joined: Sun May 24, 2020 7:05 pm
Has thanked: 2 times
Been thanked: 1 time

Re: antoniovillena.es

Unread post by gusmoney »

Pepeart wrote: Tue Sep 22, 2020 3:58 pm Same problem, only the A button works. All the other adapters work great.
I am trying to fix my NES adapter with the prescribed resistors and I am stuck at the place Pepeart describes, above.

NW6lesjm.jpg
NW6lesjm.jpg (15.02 KiB) Viewed 15646 times
What can be done here to get this adapter working'?
Pepeart
Posts: 74
Joined: Thu Sep 17, 2020 3:21 am
Has thanked: 59 times
Been thanked: 5 times

Re: antoniovillena.es

Unread post by Pepeart »

I had the wrong resistor values. get the following ones from ebay - item number 163295843022 just follow my soldering points
User avatar
gusmoney
Posts: 8
Joined: Sun May 24, 2020 7:05 pm
Has thanked: 2 times
Been thanked: 1 time

Re: antoniovillena.es

Unread post by gusmoney »

Pepeart wrote: Thu Nov 19, 2020 2:43 am I had the wrong resistor values. get the following ones from ebay - item number 163295843022 just follow my soldering points
Thanks, ordered.
User avatar
lamarax
Top Contributor
Posts: 472
Joined: Wed Nov 11, 2020 6:28 pm
Has thanked: 33 times
Been thanked: 199 times

Re: antoniovillena.es

Unread post by lamarax »

Hi Antonio,

Does your VGA to SCART cable (with integrated stereo out) work with the official 6.1 I/O board?

I'm asking because the CRT I'm planning to use with my MiSTer doesn't have a separate RCA audio line in, so offers from other sellers wouldn't be compatible to my particular case.

Thanks
Post Reply