Atari Jaguar Daemonbite Adapter
Atari Jaguar Daemonbite Adapter
https://github.com/MiSTer-devel/Retro-C ... Ter/pull/1
I made a bunch of daemonbite adapters and work great, I want to connect an atari jaguar controller (still don´t have it), don´t know if this code is made or not....
hope it is and somebody test it
Re: Atari Jaguar Daemonbite Adapter
The pinout is in the Arduino .ino listing.
I've just built a device and it is working with my Jag Controller in Windows10
Don't forget to follow these instructions to get a proper 'Daemonbite (Jaguar)' info ID when plugging into Windows etc to differentiate them from other adaptors:
-
- Top Contributor
- Posts: 1911
- Joined: Wed May 27, 2020 1:59 pm
- Has thanked: 145 times
- Been thanked: 454 times
Re: Atari Jaguar Daemonbite Adapter
Thanks for this info regarding Daemonbite ID.
I have one question:
Is this information valid for any Daemonbite adapter?
For example I build one for a NES controller and another one for a DIY arcade controller. I suppose that each one must have a different ID and I would have to use the information from the link you provided.
Re: Atari Jaguar Daemonbite Adapter
I think the answer to your question is yes.
So I type in a different name, so I have now Daemonbite (Jaguar) etc and my
leonardo.build.pid=0x8037
Is now on 0x8041 because I've made a number of different Daemonbites.
I completely forgot about changing the name and when I programmed the Pro Micro for Jaguar it was detected as Daemonbite (SNES) which was the last device I built months ago.
You need to change (add 1 to the existing number) the leonardo.build.pid otherwise the TEXT ID won't change (so I kept getting Daemonbite (SNES) still until I went to 0x8041).