MiSTer No Orange Light

Discussion of official MiSTer Project addons. (https://github.com/MiSTer-devel/Hardware_MiSTer)


nc_man
Posts: 4
Joined: Thu Aug 24, 2023 5:41 pm

MiSTer No Orange Light

Unread post by nc_man »

I am brand new to Mister and I just purchased a new Ultimate Mister FPGA, flashed the microsd card using these instructions: https://mister-devel.github.io/MkDocs_M ... -mr-fusion

Once I inserted the microSD card, I got a blue screen via HDMI. However, it never went past the blue screen. I had it sitting there for 10 minutes and the blue screen never went away. So I re-flashed the SD card this time making sure it was formatted as exFat, now my mister won't display and there isn't an orange light. I tried reseating the SD card a few times and the PSU.

Thank you in advance!

FPGA64
Top Contributor
Posts: 884
Joined: Mon Mar 01, 2021 3:10 pm
Has thanked: 48 times
Been thanked: 370 times

Re: MiSTer No Orange Light

Unread post by FPGA64 »

you sure you are using the SD card slot on the DE10 and not the secondary IO slot on the IOBoard. The real one on the DE10 is a pain to get to, its on the bottom of the De10. The secondary on the IO board wont work as a boot device.

nc_man
Posts: 4
Joined: Thu Aug 24, 2023 5:41 pm

Re: MiSTer No Orange Light

Unread post by nc_man »

This fixed it! Sure enough I was plugged it into the top SD card slot, moved it to the correct one and it instantly worked. Thank you @FPGA64

User avatar
rickdangerous
Posts: 317
Joined: Sun May 24, 2020 7:35 pm
Location: Lisbon, Portugal
Has thanked: 36 times
Been thanked: 79 times
Contact:

Re: MiSTer No Orange Light

Unread post by rickdangerous »

Glad all it's working. If you need any support you can also contact us directly though tickets or support chat.

Kind regards
Ricardo

MiSTer and FPGA Gaming European Shop
Classic MiSTer, MultiSystem, JAMMIX iTX and Official Addons.
https://ultimatemister.com powered by RetroShop.pt

Post Reply