Trouble with svideo output

Discussion about displays and related hardware including MiSTer filters and video settings.
Injamoon
Posts: 1
Joined: Sun Mar 03, 2024 12:58 am

Trouble with svideo output

Unread post by Injamoon »

I’m not getting any image on either of my CRTs when using the VGA output with an active YC adapter. I’ve made the required changes to mister.ini, changing the VGA output to svideo, and composite sync to 1. I’ve supplied power to the USB C input on the adapter. But I get no video at all through either svideo or composite. HDMI still works great. I’ve done all of the troubleshooting that I can think of. Any ideas? I’m thinking that I may have received a DOA adapter, but don’t have any way to troubleshoot that.

User avatar
colonel panic
Posts: 53
Joined: Mon May 25, 2020 1:54 pm
Been thanked: 2 times

Re: Trouble with svideo output

Unread post by colonel panic »

Are you using an analog I/O board? If so, try setting the jumper on the board to output 5v over VGA. You shouldn't need to mess with any external power after that and it should just work

Post Reply