UltimateMiSTer.com

[rickdangerous]

Was sold 100 units in few minutes for 600 subscribers, I will many more very soon.

[rickdangerous]

Two new toys in stock, more to come tomorrow.
Other color options soon.

MT32-MINI-BLACK.webp (119.86 KiB) Viewed 5456 times

MT32-MINI-RED-EDITION.webp (172.37 KiB) Viewed 5456 times

[skooter]

We ship worldwide.

Not anymore since Brazil was removed.

[rickdangerous]

We ship worldwide.

Not anymore since Brazil was removed.

Since they introduced the new customs rules in Brazil, we needed to make sure that the shipments that were previously made were arriving correctly. Currently, everything is in order and arriving at its destination, so I think we can open the stock for Brazil again.

[rickdangerous]

MT32-pi lite Rev.2 for MiSTer now available.
The new revision includes some new features like the SYNTH and ROM buttons (soft rubber) and it’s very compact.
It sits firmly on the side of the Official MiSTer and BlisSTer. It also doesn’t use any cables and it has more stable connection.
https://ultimatemister.com/product-category/mt-32-pi/

PILITE-REV2.webp (42.71 KiB) Viewed 2665 times

MT32-LITE-WHITE.webp (193.57 KiB) Viewed 2665 times

[Armand]

MT32-pi lite Rev.2 for MiSTer now available.
The new revision includes some new features like the SYNTH and ROM buttons (soft rubber) and it’s very compact.
It sits firmly on the side of the Official MiSTer and BlisSTer. It also doesn’t use any cables and it has more stable connection.
https://ultimatemister.com/product-category/mt-32-pi/

PILITE-REV2.webp
MT32-LITE-WHITE.webp

I'm going to buy it!

edit: it's already purchased

[rickdangerous]

Defining the standards, the new MiSTer A/V Pro v9.2 official board replaces that both ANALOG I/O and DIGITAL I/O boards. Committed to official development, 99% mister-devel cores (active cores) are already supported* by new A/V Pro v9.2.
https://ultimatemister.com/product/mister-a-v-pro/

Features:

• 24 Bit ADV Video DAC with official MiSTer framework integration*

• Hi-Fi Analog Audio DAC with crystal clear stereo audio, pop-free and better frequency response

• Exclusive hybrid design, it can be used as Digital I/O only for dual RAM or Analog I/O with AV module

• ADC-In 1.3 board

• Mini TOSLINK digital audio

• USER Port for SNAC, MT-32 Pi and IEC C64

• Simultaneous HDMI and Analog Audio/Video

• Unique led system with light isolation

• High and Low Fan Speed on the back of board (3.3v / 5.5v)

• High quality construction and modular build with upgradable AV board

• Compatible with previous Analog cases

Why 24bit Video DAC is better? Not only does the image look amazing and colorful it registers the data by clock. With resistors, like used in other boards, there is no registration of all bits at the same time, so there are more chances to have video artifacts.

With new A/V Pro v9.2 all DE10-nano SWs should be OFF. When framework detect the new A/V Pro v9.2 board it stops using SW3. So SW3 may be helpful just if you use the Digital Dual SDRAM config with corresponding core. In case the core is doing something quicker than framework, it detects the AV board.

AVB-BOARD-24-BIT.webp (311.46 KiB) Viewed 1370 times

AVB Board.webp (243.88 KiB) Viewed 1370 times

[dickhardpill]

Can I ask for clarification on what you mean by “99% mister-devel cores (active cores) are already supported”

I haven’t found a single arcade core yet that works with this board. I’m starting to think I got a bad one. I did not get it from you.

[rickdangerous]

Can I ask for clarification on what you mean by “99% mister-devel cores (active cores) are already supported”

I haven’t found a single arcade core yet that works with this board. I’m starting to think I got a bad one. I did not get it from you.

The mister-devel cores are the ones that Sorg has already updated and that are on Github, and it's true that we have a lot of updated Arcades. What's being done now are the updates to Jotego, which is now receiving my sample boards.

Our boards weren't put on sale earlier so that we could implement the new framework on as many cores as possible, and I'll be doing it myself on more obscure cores or those with little development activity. It was also necessary to make some adjustments to the connector, to make it more consistent, low-profile and improve the design in general (new LEDs, low-profile connector, isolators and a battery of tests). We're in no hurry, we need to make it perfect.

[mr-box]

are you going to improve the rgb color spec according to Kuro Houou its off by a little?

[rickdangerous]

Can I ask for clarification on what you mean by “99% mister-devel cores (active cores) are already supported”

I haven’t found a single arcade core yet that works with this board. I’m starting to think I got a bad one. I did not get it from you.

The cores of Cave 68000 by Josh (nullobject) Bassett, were updated yesterday with the new framework. If you want to try it out and give feedback.

[dickhardpill]

Can I ask for clarification on what you mean by “99% mister-devel cores (active cores) are already supported”

I haven’t found a single arcade core yet that works with this board. I’m starting to think I got a bad one. I did not get it from you.

The cores of Cave 68000 by Josh (nullobject) Bassett, were updated yesterday with the new framework. If you want to try it out and give feedback.

I’ve been playing with the updated cave core. It works and looks great!

[rickdangerous]

The new dedicated SNAC N64 is coming soon. Completely reimagined, new design and aluminium shell. Many new products in development.
https://ultimatemister.com/product/snac-n64/