Confirmation of bug - or is it just me?

egrath
Posts: 17
Joined: Sat Apr 16, 2022 5:10 pm
Been thanked: 11 times

Confirmation of bug - or is it just me?

Unread post by egrath »

Hi,

can someone please reproduce the following bug report:

https://github.com/MiSTer-devel/AtariST ... /issues/26

Happened today after i finished a complete fresh installation of my MiSTer.

With kind regards,
egrath

Flandango
Core Developer
Posts: 462
Joined: Wed May 26, 2021 9:35 pm
Has thanked: 60 times
Been thanked: 384 times

Re: Confirmation of bug - or is it just me?

Unread post by Flandango »

I just tested the configuration you posted (4m MegaSTE w/ mono monitor) using TOS 2.06 (US version MD5: c9093f27159e7d13ac0d1501a95e53d4) and didn't have the issue.
Here are my other settings, just in case they may differ with yours:

Code: Select all

Viking: On
Aspect: Original
Mono 60Hz: Off
Video Crop: Full
Scale: Normal
Scanlines: Off
Dongle: None
YM-Audio: Stereo
egrath
Posts: 17
Joined: Sat Apr 16, 2022 5:10 pm
Been thanked: 11 times

Re: Confirmation of bug - or is it just me?

Unread post by egrath »

Hm … same issue with the settings you provided. Can you please post your MiSTer.ini too, maybe i screwed up something there. Sidenote: could that have something to do with the Jammix board my mister is in?

Flandango
Core Developer
Posts: 462
Joined: Wed May 26, 2021 9:35 pm
Has thanked: 60 times
Been thanked: 384 times

Re: Confirmation of bug - or is it just me?

Unread post by Flandango »

Attached is the ini I used for the test. Not the latest version available but if the setting is not there, mister will use whatever the default value is, so use it only for comparison.
As for using with the Jammix board...I can't speak to it since I don't have one to test with, but I doubt it will interfere with the core midstream. If anything, problems would of popped up immediately and not just in Mono and after loading the core.
However, if it's possible, it's always best to remove all non-essential addons from your setup to test to make sure the core device (DE-10 nano, sd card setup and SDRAM) works.

Attachments
MiSTer.ini
(18 KiB) Downloaded 99 times
egrath
Posts: 17
Joined: Sat Apr 16, 2022 5:10 pm
Been thanked: 11 times

Re: Confirmation of bug - or is it just me?

Unread post by egrath »

Unfortunately, your config made no difference on my MiSTer. Removed everything except for the SDRAM, still the same issue. SDRAM is running stable at 147 for 6 hours now to make sure it's not a problem with the SDRAM.

Maybe (hopefully) the developers come up with something :-)

egrath
Posts: 17
Joined: Sat Apr 16, 2022 5:10 pm
Been thanked: 11 times

Re: Confirmation of bug - or is it just me?

Unread post by egrath »

Did further testing, this seems to be some regression introduced along the way. The previous core (AtariST_20231208.rbf) works without any problems.

Flandango
Core Developer
Posts: 462
Joined: Wed May 26, 2021 9:35 pm
Has thanked: 60 times
Been thanked: 384 times

Re: Confirmation of bug - or is it just me?

Unread post by Flandango »

The only that changed between those two releases is the framework, but you would have also seen similar issues with other cores that have recently been updated.
What version of Main are you running? The version I have, which should be the current release as of this writing, is v240912.

egrath
Posts: 17
Joined: Sat Apr 16, 2022 5:10 pm
Been thanked: 11 times

Re: Confirmation of bug - or is it just me?

Unread post by egrath »

My MiSTer binary is 20240912
My Linux OS distribution is 241008

SD card has been freshly installed from scratch with the SD installer release_20241008.7z

All other cores I tried so far don't show any strange behavior and work great as usual (Minimig, C64, PC-XT, SNES, SMS, Arcade Irem M92)

Flandango
Core Developer
Posts: 462
Joined: Wed May 26, 2021 9:35 pm
Has thanked: 60 times
Been thanked: 384 times

Re: Confirmation of bug - or is it just me?

Unread post by Flandango »

When I get the chance, I'll grab a new SD card and do a clean install and test, just in case an old config is...making things work for me.
Also...have you tried it on a different monitor?

Flandango
Core Developer
Posts: 462
Joined: Wed May 26, 2021 9:35 pm
Has thanked: 60 times
Been thanked: 384 times

Re: Confirmation of bug - or is it just me?

Unread post by Flandango »

As a follow up...I started with a new SD Card, used the latest Fusion (v2.9), ran the update script and only pushed over my TOS files and couldn't reproduce the problem.
One last thing to check, is to verify all the switches are in their correct position.

egrath
Posts: 17
Joined: Sat Apr 16, 2022 5:10 pm
Been thanked: 11 times

Re: Confirmation of bug - or is it just me?

Unread post by egrath »

Darn, this is bad (for me). Seems that I'm the only one having this issue. Will recheck everything and keep the thread up-to-date with any observations I make.

Is there a reference for the 4 big dip switches (SW3-SW2-SW1-SW0) and their correct positions?

As I'm using a JAMMIX board i have them in the following positions as shown in the manual:

SW3 - OFF
SW2 - ON
SW1 - OFF
SW0 - ON

(https://drive.google.com/file/d/16IC4hA ... LG9xE/view)

Would love to know what each of these big dip switches is for. The smaller dips are in the correct position:

SW1 - ON
SW2 - OFF
SW3 - ON
SW4 - OFF
SW5 - ON
SW6 - ON

Would also be great to have a documentation for these ones if there exists one.

With kind regards,
egrath

FPGA64
Top Contributor
Posts: 964
Joined: Mon Mar 01, 2021 3:10 pm
Has thanked: 49 times
Been thanked: 385 times

Re: Confirmation of bug - or is it just me?

Unread post by FPGA64 »

The way to check then is to remove the Jammix , go back to the simplest DE10 with Ram and nothing else and check again. Then add complexity till it stops working.

For info it works perfectly for me with a De10, Official USB hub and Official Digital IO board. Jammix is 3rd party unsupported HW and so problems with it should be directed at the seller.

egrath
Posts: 17
Joined: Sat Apr 16, 2022 5:10 pm
Been thanked: 11 times

Re: Confirmation of bug - or is it just me?

Unread post by egrath »

See my 3rd post, it does not work for me even with the JAMMIX removed from the equation. Stock configuration, just the DE10-nano and the SDRAM module. In this configuration (without the JAMMIX) the DIP switches were set to what the documentation says, didn't made any difference :-/

Next thing to try is a different HDMI display.

akeley
Top Contributor
Posts: 1460
Joined: Mon May 25, 2020 7:54 pm
Has thanked: 505 times
Been thanked: 471 times

Re: Confirmation of bug - or is it just me?

Unread post by akeley »

Are you using an original DE10 Nano or a clone board?

CRT SCR$ Project - building a collection of high-quality photos of CRT displays
CRT ART Books - retro-gaming books with authentic CRT photos

egrath
Posts: 17
Joined: Sat Apr 16, 2022 5:10 pm
Been thanked: 11 times

Re: Confirmation of bug - or is it just me?

Unread post by egrath »

  • Original DE10-nano from Terasic
  • 128 MB SDRAM from Ultimatemister, runs stable for > 6hrs @ 147 Mhz
  • LG 27" FHD Display connected over HDMI
Post Reply