PC98 Core

saibayadon
Posts: 1
Joined: Mon May 24, 2021 5:53 am

Re: PC98 Core

Unread post by saibayadon »

First of all, thanks puu for the hard work. It's incredible that this is already booting games.

I've set up everything and have managed to run some games. CRW (with the English patch) is booting perfectly when using D88 and loading both A and B disks. Chitty Chitty Train errors out with a "I/O Error" and a constant beep when trying to boot it. I'll continue testing games I have.

One thing I've noticed, and this may be my setup, is that the keyboard input stops working after a short amount of time or doesn't work at all. I booted the DOS disk someone shared here and was able to issue some commands and type for a short while and then it gets stuck. Has anyone seen a similar thing?

1QjSqTM.png
1QjSqTM.png (448.6 KiB) Viewed 77603 times

Are there any plans to support hard drive images ala VHD? It'd be very useful to be able to load something like https://nfggames.com/forum2/index.php?topic=5463.0
ShyTalk
Posts: 27
Joined: Mon May 24, 2021 8:55 pm
Has thanked: 7 times
Been thanked: 3 times

Re: PC98 Core

Unread post by ShyTalk »

Alkadian wrote: Mon Feb 22, 2021 10:36 am
wark91 wrote: Sun Feb 21, 2021 7:11 pm Ok.
You just load the first floppy or did you reset ?
The reset doesn't seem to work correctly.
The only way I have found to work every-time after tested the floppies on emulator is :
- Restart the Mister
- Start the core Zet98
- Load the first floppy
@wark91,

Many thanks for your help, I got it working at the end!
Hi, Do you mind confirming how you got this to work in the end? I seem to be stuck at the same point as you but I can't seem to crack this:

1. I have my 5 Rusty .d88 files (Game disks A, B, C, Opening, System);
2. I run the core;
3. Ensure that the core settings are "standard";
4. I bring up the OSD and select "FDD0 *.D88 and select Rusty (System Disk);
5. I bring up the OSD again and select "FDD1 *.D88 and select Rusty (Opening Disk)
6. I click Reset and the Game System Disk seems to begin to load;
7. After a few moments the screen just goes blank

Have I missed something or could it be my Neo Kobe version of the roms do you think?

Thanks for any assistance!
User avatar
Alkadian
Top Contributor
Posts: 728
Joined: Thu May 28, 2020 9:55 am
Has thanked: 294 times
Been thanked: 119 times

Re: PC98 Core

Unread post by Alkadian »

ShyTalk wrote: Mon May 24, 2021 9:03 pm
Alkadian wrote: Mon Feb 22, 2021 10:36 am
wark91 wrote: Sun Feb 21, 2021 7:11 pm Ok.
You just load the first floppy or did you reset ?
The reset doesn't seem to work correctly.
The only way I have found to work every-time after tested the floppies on emulator is :
- Restart the Mister
- Start the core Zet98
- Load the first floppy
@wark91,

Many thanks for your help, I got it working at the end!
Hi, Do you mind confirming how you got this to work in the end? I seem to be stuck at the same point as you but I can't seem to crack this:

1. I have my 5 Rusty .d88 files (Game disks A, B, C, Opening, System);
2. I run the core;
3. Ensure that the core settings are "standard";
4. I bring up the OSD and select "FDD0 *.D88 and select Rusty (System Disk);
5. I bring up the OSD again and select "FDD1 *.D88 and select Rusty (Opening Disk)
6. I click Reset and the Game System Disk seems to begin to load;
7. After a few moments the screen just goes blank

Have I missed something or could it be my Neo Kobe version of the roms do you think?

Thanks for any assistance!
Hi there,

I have just double checked the files again and they still run fine on my side. I can confirm that I have used the Neo Kobe version as well and I have used the very handy pgimeno converter tool to convert the .hdm. to .D88. This tool really works like a charm, as all his other converters!

I don't see anything wrong in your steps. Please make sure you have got the correct/recommended settings:

DIP1-8 Extend
DIP1-3 Normal
DIP2-1 1
DIP2-2 Basic
DIP2-3 80
DIP2-4 25
DIP2-5 Keep
DIP2-6 Connect
DIP2-7 Control
DIP2-8 2.5MHz

Other than that I cannot think of anything else. Please let me know how it goes.
JsonOne
Posts: 4
Joined: Mon Sep 27, 2021 12:45 am

Re: PC98 Core

Unread post by JsonOne »

Has there been any update on getting hard disks working? Some of the bigger games aren't on floppy disks
User avatar
Moondandy
Top Contributor
Posts: 535
Joined: Mon May 25, 2020 2:14 am
Location: Edinburgh, Scotland
Has thanked: 32 times
Been thanked: 102 times

Re: PC98 Core

Unread post by Moondandy »

Hey guys, I was wondering what the status of this core is now? Is the source code available anywhere? Has anyone picked it up now Puu has moved onto FM Towns?
Milspex
Posts: 167
Joined: Wed Jun 10, 2020 6:46 pm
Has thanked: 38 times
Been thanked: 35 times

Re: PC98 Core

Unread post by Milspex »

saibayadon wrote: Mon May 24, 2021 6:04 am I've set up everything and have managed to run some games. CRW (with the English patch) is booting perfectly when using D88 and loading both A and B disks. Chitty Chitty Train errors out with a "I/O Error" and a constant beep when trying to boot it. I'll continue testing games I have.
Can someone drop these D88 patched files on archive or someplace please? :oops: (hint hint Dead of the Brain english patched)

Also imagine the possibilites if this core could read hdm / hdi / fdi file types. Unlock all..

Also, maybe this is of any help https://www.romhacking.net/utilities/1616/
teller
Posts: 39
Joined: Thu Jul 23, 2020 9:29 pm
Has thanked: 14 times
Been thanked: 3 times

Re: PC98 Core

Unread post by teller »

Did somebody get the english-patched version of 46 Okunen Monogatari - The Shinkaron (E.V.O. - The Theory of Evolution) to work?
I converted the .hdm-files to .d88 with Virtual Floppy Image Converter and the game boots but after ENIX PRESENTS there is s black screen. I also checked it unpachted, same issue.
softtest9
Posts: 166
Joined: Thu May 28, 2020 7:13 pm
Has thanked: 3 times
Been thanked: 22 times

Re: PC98 Core

Unread post by softtest9 »

Is the floppy code on the FPGA or ARM side? If it's on the ARM side, perhaps a software developer could take a look. Emulators generally support multiple formats and some of them are open-source.
puu
Core Developer
Posts: 113
Joined: Mon May 25, 2020 9:20 am
Location: Japan
Has thanked: 2 times
Been thanked: 151 times
Contact:

Re: PC98 Core

Unread post by puu »

softtest9 wrote: Sun Jan 09, 2022 11:28 am Is the floppy code on the FPGA or ARM side? If it's on the ARM side, perhaps a software developer could take a look. Emulators generally support multiple formats and some of them are open-source.
FDD code is on FPGA.
The ARM side only inputs and outputs files, and the FPGA expands the .d88 image to the track image.
The .d88 format is used because it can handle formats where the sector size is different for each track or there are multiple size sectors in the track.
Elrinth
Posts: 5
Joined: Sun Jan 16, 2022 2:28 am

Re: PC98 Core

Unread post by Elrinth »

How do you get this core running?

I put the Zet98_20210217.rbf in the /fat/media/_Computer folder and I made a /fat/media/games/zet98/ folder... then what?

I only get a black screen.

I got help in the discord... Seems the file you need is the one posted by tonton earlier...
nero81af
Posts: 1
Joined: Fri Jan 21, 2022 10:26 pm

Re: PC98 Core

Unread post by nero81af »

Hi There,
First of all great job mr. Puu! I was playing around with pc98 core but the three games that I'd like to play do not work.. what can I do to help out? I'm a c++ coder only :( the three games are

dragon slayer: the legend of heroes
dragon slayer: the legend of heroes II
snatcher

My setup should be ok.. I can boot the dos disk!
davidpgil
Posts: 2
Joined: Wed Mar 16, 2022 2:10 am
Has thanked: 1 time

Re: PC98 Core

Unread post by davidpgil »

Just started to get interested in Mister because of PC98 -- following.
davidpgil
Posts: 2
Joined: Wed Mar 16, 2022 2:10 am
Has thanked: 1 time

Re: PC98 Core

Unread post by davidpgil »

... I JUST ordered a Mister morning after reading this thread. I love retro hardware but some of these old systems didnt really think about the historical preservation aspect and buying a fully compatible PC98 "system" can be quite expensive, just to be able to play games. I recently became osessed with trying to get into PC98 and now I can with Mister!
TimeWarpGamer
Posts: 11
Joined: Sat Mar 19, 2022 6:32 pm
Has thanked: 1 time

Re: PC98 Core

Unread post by TimeWarpGamer »

pgimeno wrote: Mon Feb 22, 2021 10:04 am Since I can't run that disk tool, I made a converter from FDI to D88 in Python, based on my previous DIM to D88 converter. Usage is:

python fdi2d88.py <input file> <output file>
Huge props for the Python script. Thanks so much for sharing. First try it worked great, then I tried Hellhound and Phalanx .dim files and got an error: "raise Exception('Data present in a track number not supported by D88, aborting'). I guess some .dim games cannot be converted to .d88?
User avatar
pgimeno
Top Contributor
Posts: 710
Joined: Thu Jun 11, 2020 9:44 am
Has thanked: 277 times
Been thanked: 226 times

Re: PC98 Core

Unread post by pgimeno »

TimeWarpGamer wrote: Sun Mar 27, 2022 8:38 pm Huge props for the Python script. Thanks so much for sharing. First try it worked great, then I tried Hellhound and Phalanx .dim files and got an error: "raise Exception('Data present in a track number not supported by D88, aborting'). I guess some .dim games cannot be converted to .d88?
These are for X68000, right? I can't reproduce the problem you're running into; maybe you need to redownload the tool? (check my sig)

Or maybe you were trying to use FDI2D88 to convert DIM files? Note that each file type needs a different converter. For DIM files you need to use dim2d88.py.
JsonOne
Posts: 4
Joined: Mon Sep 27, 2021 12:45 am

Re: PC98 Core

Unread post by JsonOne »

puu wrote: Thu Jan 13, 2022 8:58 am
softtest9 wrote: Sun Jan 09, 2022 11:28 am Is the floppy code on the FPGA or ARM side? If it's on the ARM side, perhaps a software developer could take a look. Emulators generally support multiple formats and some of them are open-source.
FDD code is on FPGA.
The ARM side only inputs and outputs files, and the FPGA expands the .d88 image to the track image.
The .d88 format is used because it can handle formats where the sector size is different for each track or there are multiple size sectors in the track.
There is some issue with the keyboard controller, holding down a key other than shift for more than a second will cause the computer to freeze. Using de0cv version, the address lights on 7 seg are stuck too when this happens.
Madnar
Posts: 3
Joined: Wed Jun 01, 2022 1:16 am

Re: PC98 Core

Unread post by Madnar »

saibayadon wrote: Mon May 24, 2021 6:04 am First of all, thanks puu for the hard work. It's incredible that this is already booting games.

I've set up everything and have managed to run some games. CRW (with the English patch) is booting perfectly when using D88 and loading both A and B disks.
Yes, I second thanking puu for the hard work. These Japanese computer cores are the ones I'm interested in trying the most! Have you played CRW at all? I'm trying to play the first level, but the game feels a lot more sluggish than a video of a play through I saw on youtube, which makes it tough for a game with real-time elements. I'm not sure if that's just emulation vs Mister, something I have to configure, or if I should be patient for a more mature core. :)

Also, does anyone have the Dead of the Brain translation working properly? The game is running on my end, but the text is gibberish. It's not English or Japanese. If I remember, maybe there are vertical lines over the entire screen, too (like jail bars).
Madnar
Posts: 3
Joined: Wed Jun 01, 2022 1:16 am

Re: PC98 Core

Unread post by Madnar »

Hey, I'm trying to see if I can create a SASI HDF file from the neko project II emulator. Can any of the below HD types be converted? Or is there some other way to create this type of HD?

gyu587.jpg
gyu587.jpg (49.32 KiB) Viewed 64929 times
puu
Core Developer
Posts: 113
Joined: Mon May 25, 2020 9:20 am
Location: Japan
Has thanked: 2 times
Been thanked: 151 times
Contact:

Re: PC98 Core

Unread post by puu »

Unfortunately PC-98core does not yet support HDD.
Because in the PC-98 of the 8086 CPU era, the HDD was SASI or SCSI, but there are many types of host adapters including third parties, and the SCSI on hand is made by a third party and only a limited number of people can obtain the BIOS for this. Also, I don't have a genuine NEC SASI / SCSI host adapter, so I can't get the BIOS.
Later, the IDE was installed in the PC-98, but by that time the CPU was already in the 486 era, and the DISK BIOS is included in the system BIOS, but the CPU of this core uses instructions that cannot be used in the 8086. Cannot be executed.
However, I cannot support it because I do not have the ability to create a SASI / SCSI BIOS.
User avatar
aberu
Core Developer
Posts: 1192
Joined: Tue Jun 09, 2020 8:34 pm
Location: Longmont, CO
Has thanked: 247 times
Been thanked: 411 times
Contact:

Re: PC98 Core

Unread post by aberu »

I think a few computer cores bypass this or they have a patched BIOS to get around this problem as a workaround. @sorgelig has offered to help with something similar for the upcoming PC-XT core, maybe he can give some advice or help with this too.
birdybro~
JsonOne
Posts: 4
Joined: Mon Sep 27, 2021 12:45 am

Re: PC98 Core

Unread post by JsonOne »

puu wrote: Fri Jul 29, 2022 4:20 pm Because in the PC-98 of the 8086 CPU era, the HDD was SASI or SCSI, but there are many types of host adapters including third parties, and the SCSI on hand is made by a third party and only a limited number of people can obtain the BIOS for this. Also, I don't have a genuine NEC SASI / SCSI host adapter, so I can't get the BIOS.
I might have discovered a solution for this check your PMs messages!
Jegriva
Posts: 83
Joined: Wed Mar 10, 2021 10:06 pm
Has thanked: 51 times
Been thanked: 9 times

Re: PC98 Core

Unread post by Jegriva »

Hi, does this runs also on consumer CRT?

akeley
Top Contributor
Posts: 1458
Joined: Mon May 25, 2020 7:54 pm
Has thanked: 505 times
Been thanked: 471 times

Re: PC98 Core

Unread post by akeley »

Jegriva wrote: Thu Nov 02, 2023 6:09 pm

Hi, does this runs also on consumer CRT?

I can get a stable image using modelines from PC-88 (which in turn were borrowed from ao486) , but it's squashed - even after applying 16:9 ratio.

On PC-88 it's the same, but this core has the Aspect Ratio: Full Screen option which helps to alleviate this problem.

Try at your own risk:

Code: Select all

[Zet98]
direct_video=0
vga_scaler=1
vsync_adjust=2
vscale_mode=3
video_mode=1280,159,140,248,240,11,0,19,29568

CRT SCR$ Project - building a collection of high-quality photos of CRT displays
CRT ART Books - retro-gaming books with authentic CRT photos

User avatar
Newsdee
Top Contributor
Posts: 873
Joined: Mon May 25, 2020 1:07 am
Has thanked: 104 times
Been thanked: 239 times

Re: PC98 Core

Unread post by Newsdee »

Does anybody have a list of game recommendations that work on the current pc98 core?

koshi
Posts: 1
Joined: Sat Aug 29, 2020 6:58 am

Re: PC98 Core

Unread post by koshi »

puu wrote: Fri Jul 29, 2022 4:20 pm

Unfortunately PC-98core does not yet support HDD.
Because in the PC-98 of the 8086 CPU era, the HDD was SASI or SCSI, but there are many types of host adapters including third parties, and the SCSI on hand is made by a third party and only a limited number of people can obtain the BIOS for this. Also, I don't have a genuine NEC SASI / SCSI host adapter, so I can't get the BIOS.
Later, the IDE was installed in the PC-98, but by that time the CPU was already in the 486 era, and the DISK BIOS is included in the system BIOS, but the CPU of this core uses instructions that cannot be used in the 8086. Cannot be executed.
However, I cannot support it because I do not have the ability to create a SASI / SCSI BIOS.

Thank you for your great work on all this classic Japanese comuters! Its a shame, though, that no HDDs are supported. I think this really holds back more people from getting into it, because it seems that especially translated games + games with extras, etc. are distributed as Hard Disk image.
I didn't exactly understand what is holding you back here - is it just a question of getting a genuine NEC host adapter? Or is the problem dumping the BIOS? I would be willing to buy a controller and an EPROM programmer, if that would be of any help!

JsonOne
Posts: 4
Joined: Mon Sep 27, 2021 12:45 am

Re: PC98 Core

Unread post by JsonOne »

Hey puu I use the DE0-CV version and would like to take a look at the FDD code to modify it to work with the IDE->SASI bios but couldn't find the code that runs in NIOS anywhere, do you know where it is?

SavitarSvit
Posts: 1
Joined: Sat Aug 24, 2024 8:05 am

Re: PC98 Core

Unread post by SavitarSvit »

puu, are there any plans to implement EGC (Enhanced Graphic Charger)?

softtest9
Posts: 166
Joined: Thu May 28, 2020 7:13 pm
Has thanked: 3 times
Been thanked: 22 times

Re: PC98 Core

Unread post by softtest9 »

I believe puu is focusing on FM-Towns and won't be developing the PC-98 core anytime soon.

User avatar
siskavard
Posts: 63
Joined: Sun May 24, 2020 11:47 pm
Has thanked: 29 times
Been thanked: 6 times

Re: PC98 Core

Unread post by siskavard »

Would be cool if this core came out eventually.

Post Reply