MiSTer FPGA Forum

Posted: **Wed Aug 05, 2020 3:58 pm**

Another try with the sdram...

Test and Tell us!!

Posted: **Wed Aug 05, 2020 4:10 pm**

Thank you fpganoob, I'm going to try it in a couple of minutes and let you know. Just for information, I've just tested the previous Beta04 (and the 03) by using an external SD card as you advised me, and I ended to the same issue than using them by having the boot.vhd in internal SD. Both don't work on my Mister, only the Beta02 works.

Posted: **Wed Aug 05, 2020 4:17 pm**

@fpganoob,
I've just tried the Beta4.01 and it doesn't work neither on my side. Tested with both external and internal SD. Same problem graphic issue and randomly I have a reboot or I have a message telling me that the version of the command2.com is wrong.

Posted: **Wed Aug 05, 2020 4:24 pm**

I'm sorry, that's a strange behavior. It must be related to sdram, cause it's the only changes between this and Beta02.

We will continue trying.
Thanks for testing!!

Posted: **Wed Aug 05, 2020 5:24 pm**

This new version works fine on my Mister

Posted: **Wed Aug 05, 2020 5:30 pm**

Yes, it seems we are not breaking nothing... but neither fixing...

Posted: **Wed Aug 05, 2020 6:12 pm**

4.01 Works fine here.

Loving this core, Kings Valley 2 is a must play!

Posted: **Wed Aug 05, 2020 6:36 pm**

@fpganoob, great to see you here ! Sure, we'll try to help kathleen and other people with 128MB SDRAM and find a fix for all.

Posted: **Wed Aug 05, 2020 6:46 pm**

I have 128 mb of sdram.

Posted: **Wed Aug 05, 2020 6:47 pm**

tontonkaloun wrote: ↑Wed Aug 05, 2020 6:46 pm I have 128 mb of sdram.

Same here. 128 mb sdram.

Posted: **Wed Aug 05, 2020 7:46 pm**

All versions work for me, but I have the VHD on network mount of the entire "GAMES" folder. Not stored on SD. 32M RAM.

Posted: **Thu Aug 06, 2020 10:52 pm**

@kathleen Do you mind to test?
Everyone is welcome to test it, specially if you have problems with Beta > 2

Posted: **Thu Aug 06, 2020 11:35 pm**

@fpganoob,
I've just tried the Beta02 and you know what ? This issue works like a charm now on my Mister ! I'm so happy.
Thank you so much, really appreciate your help and your great work !

Posted: **Fri Aug 07, 2020 4:48 am**

Nice to hear that works.
I think now will work with any SDRAM !
Test and Feedback , pease.

Posted: **Fri Aug 07, 2020 12:29 pm**

This new version works very well on my mister

Posted: **Fri Aug 07, 2020 6:43 pm**

tontonkaloun wrote: ↑Fri Aug 07, 2020 12:29 pm This new version works very well on my mister

Same here. It’s rocking out

Posted: **Sat Aug 08, 2020 5:03 pm**

good work!! Now to get 15khz ^_^

Posted: **Sat Aug 22, 2020 1:22 pm**

I am trying beta 2, beta 3 and beta 4.02 and they all works but all 3 suffers of a very tedious and boring background noise that never goes away..

Someone has same issue on his Mister?

Posted: **Sun Sep 27, 2020 2:08 pm**

New Beta!!!

- Better VHD management, fixed writing.
- Implemented Tape In load.

Posted: **Sun Sep 27, 2020 3:51 pm**

Thank you for the update.
How do you load tapes on the MiSTer MSX core?
I have the ADC and some wav files.

Posted: **Sun Sep 27, 2020 6:50 pm**

It depends of the tape.

Normally :
- load "cas:",r
- bload "cas:",r

Posted: **Sun Sep 27, 2020 7:04 pm**

fpganoob wrote: ↑Sun Sep 27, 2020 6:50 pm It depends of the tape.

Normally :
- load "cas:",r
- bload "cas:",r

Thank you.
I'm sure I'm missing a step but I keep getting an error when I enter those commands.

: bload.png (1.92 KiB) Viewed 11109 times

Posted: **Sun Sep 27, 2020 8:02 pm**

I think your " are not the correct character. It must not be inverse.

Posted: **Sun Sep 27, 2020 8:19 pm**

I've just tried on my side with the game Cubic_Duel and the correct command to load it is CLOAD (with nothing behind) and the game was loaded and ran fine (It helped me to check if my ADC works also for this core and yes! it works fine)

For the " character you should normally use SHIFT + ² (the key at the left side of the key 1(&) and you'll get the " and not the one in inverse video

Bload should work like this

Posted: **Sun Sep 27, 2020 8:20 pm**

kathleen wrote: ↑Sun Sep 27, 2020 8:19 pm I've just tried on my side with the game Cubic_Duel and the correct command to load it is CLOAD (with nothing behind) and the game was loaded and ran fine (It helped me to check if my ADC works also for this core and yes! it works fine)

For the " character you should normally use SHIFT + ² (the key at the left side of the key 1(&) and you'll get the " and not the one in inverse video

Thank you!!!

Posted: **Sun Sep 27, 2020 9:25 pm**

kathleen wrote: ↑Sun Sep 27, 2020 8:19 pm I've just tried on my side with the game Cubic_Duel and the correct command to load it is CLOAD (with nothing behind) and the game was loaded and ran fine (It helped me to check if my ADC works also for this core and yes! it works fine)

For the " character you should normally use SHIFT + ² (the key at the left side of the key 1(&) and you'll get the " and not the one in inverse video

Bload should work like this

Thank you.
I'm making some progress. I can load cubic duel but I don't get the OK prompt.

Posted: **Wed Sep 30, 2020 5:41 pm**

I have question regarding the config.txt.
I changed the keyboard and set 0 to turbo. It doesn't seem to be taking in account.
The keyboard layout doesn't change and the games still too quick.
Is the config.txt is taking in account ? How to slow down the game (disable the turbo) ?

Posted: **Thu Oct 01, 2020 9:28 am**

wark91 wrote: ↑Wed Sep 30, 2020 5:41 pm I have question regarding the config.txt.
I changed the keyboard and set 0 to turbo. It doesn't seem to be taking in account.
The keyboard layout doesn't change and the games still too quick.
Is the config.txt is taking in account ? How to slow down the game (disable the turbo) ?

Yes Turbo setting from config.txt is read and configured at boot.
IIRC Keyboard layout too.

You can change the turbo status with turbo from msxdos. It's an utility from the original core from Fabio.

Beta 4.05 01/10/2020
- Tape Load in Turbo mode up to, al least, 3850 Bauds. In Normal mode just 1200 Bauds

Posted: **Thu Oct 01, 2020 5:05 pm**

fpganoob wrote: ↑Thu Oct 01, 2020 9:28 am
wark91 wrote: ↑Wed Sep 30, 2020 5:41 pm I have question regarding the config.txt.
I changed the keyboard and set 0 to turbo. It doesn't seem to be taking in account.
The keyboard layout doesn't change and the games still too quick.
Is the config.txt is taking in account ? How to slow down the game (disable the turbo) ?
Yes Turbo setting from config.txt is read and configured at boot.
IIRC Keyboard layout too.

You can change the turbo status with turbo from msxdos. It's an utility from the original core from Fabio.

Beta 4.05 01/10/2020
- Tape Load in Turbo mode up to, al least, 3850 Bauds. In Normal mode just 1200 Bauds

With Release Beta 4.05 finally I was able to load from Tape successfully.

Posted: **Thu Oct 01, 2020 6:58 pm**

@tontonkaloun could you please post a link to the VHD file again? I'm super keen to try this. Many thanks.

MiSTer FPGA Forum

Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss

Re: Core MSX1 by Fabio Belavenuto ported to MiSTer by Yo_Me and Benitoss