tty2oled Soft&Hardware Add-On (Shows Core based Pictures on a Display)
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
This is what I did.
Fed all grounds into a block like this...
Soldered all pins together and taped and sealed with electrical tape.
Eight grounds from the OLED go into this and one ground from this block is fed to the GND on the TTGO.
Fed all grounds into a block like this...
Soldered all pins together and taped and sealed with electrical tape.
Eight grounds from the OLED go into this and one ground from this block is fed to the GND on the TTGO.
You do not have the required permissions to view the files attached to this post.
-
- Top Contributor
- Posts: 774
- Joined: Mon Mar 01, 2021 3:10 pm
- Has thanked: 45 times
- Been thanked: 333 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
I built this at lunchtime using a Circuit Board sourced from the spares of Gojira54. Its a wonderful little thing. Thanks for making this project and open sourcing it. Thanks also to whoever designed the circuit board it makes it much more easy to build. Its just a case of soldering some pin headers.
I couldnt get the tiny tiny resistor off the OLED for 4 SPI mode so I just cut R5 using snips and solder bridged the correct jumper on the OLED
I couldnt get the tiny tiny resistor off the OLED for 4 SPI mode so I just cut R5 using snips and solder bridged the correct jumper on the OLED
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
Core doesn't exist yet I know, but made a couple more...
You do not have the required permissions to view the files attached to this post.
- RealLarry
- Top Contributor
- Posts: 778
- Joined: Mon May 25, 2020 4:04 am
- Location: San Junipero/DE/Earth
- Has thanked: 93 times
- Been thanked: 336 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
That's me, you're welcome. That was born of pure self-interest, but with "open" in mind as in the next post and upcoming project...but psssssst! Don't let anyone know publicly!
- RealLarry
- Top Contributor
- Posts: 778
- Joined: Mon May 25, 2020 4:04 am
- Location: San Junipero/DE/Earth
- Has thanked: 93 times
- Been thanked: 336 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
A case for an external tty2oled with a 3.12" SSD1322 display. WIll be on project site this day.
https://github.com/venice1200/MiSTer_tt ... ases/Cases
https://github.com/venice1200/MiSTer_tt ... ases/Cases
You do not have the required permissions to view the files attached to this post.
- venice
- Top Contributor
- Posts: 741
- Joined: Tue Jun 16, 2020 9:29 am
- Location: Germany
- Has thanked: 264 times
- Been thanked: 262 times
Re: tty2oled Software Add-On now with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
You can do this as well.
Two GND Cables connected to each GND Terminal
You do not have the required permissions to view the files attached to this post.
- venice
- Top Contributor
- Posts: 741
- Joined: Tue Jun 16, 2020 9:29 am
- Location: Germany
- Has thanked: 264 times
- Been thanked: 262 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
"lunchtime project" , cool.FPGA64 wrote: ↑Tue May 18, 2021 3:52 pm I built this at lunchtime using a Circuit Board sourced from the spares of Gojira54. Its a wonderful little thing. Thanks for making this project and open sourcing it. Thanks also to whoever designed the circuit board it makes it much more easy to build. Its just a case of soldering some pin headers.
I couldnt get the tiny tiny resistor off the OLED for 4 SPI mode so I just cut R5 using snips and solder bridged the correct jumper on the OLED
If you like let us know how it looks like.
Re: tty2oled Software Add-On now with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
That's exactly what I'm thinking. I have the boards and breakout here. Just waiting for the screens to arrive from China.
- venice
- Top Contributor
- Posts: 741
- Joined: Tue Jun 16, 2020 9:29 am
- Location: Germany
- Has thanked: 264 times
- Been thanked: 262 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
New Pictures available
Final Fight, ProGear, The Punisher, Solomons Key(2x), Street Fighter 2, Street Fighter 2 Turbo, Super Street Fighter 2 Turbo.
All made by "jawler".
Wonderswan by "gojira54".
Computer:
Altair8800, Amstrad, Apogee, Aquarius, BK0011M, CoCo2, EDSAC, Galaksija, Jupiter, MultiComp,
ORAO, Oric, PDP1, SamCoupe, Specialist (Text), SVI328, TI99-4A, TRS-80, TSConf (Text), Vector06, VIC20 (Update) & Arduboy.
Console:
AY-3-8500
Lists updated.
Final Fight, ProGear, The Punisher, Solomons Key(2x), Street Fighter 2, Street Fighter 2 Turbo, Super Street Fighter 2 Turbo.
All made by "jawler".
Wonderswan by "gojira54".
Computer:
Altair8800, Amstrad, Apogee, Aquarius, BK0011M, CoCo2, EDSAC, Galaksija, Jupiter, MultiComp,
ORAO, Oric, PDP1, SamCoupe, Specialist (Text), SVI328, TI99-4A, TRS-80, TSConf (Text), Vector06, VIC20 (Update) & Arduboy.
Console:
AY-3-8500
Lists updated.
- venice
- Top Contributor
- Posts: 741
- Joined: Tue Jun 16, 2020 9:29 am
- Location: Germany
- Has thanked: 264 times
- Been thanked: 262 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
Updates
Got my first Cardware Donation from Bracknell/UK
- USB-Version
Autodetection of Board Type in Arduino Sketch when using the Arduino IDE.
No need to set the Board manually in the Program Code.
Functionality tested with Arduino IDE 1.8.13, ESP32 Package 1.0.6, ESP8266 Package 3.0.0,
TTGO-T8, Wemos Lolin32 and NodeMCU 8266.
- New (untested) PCB by RealLarry for ESP32 Wemos Lolin32 v1.0.0/ESP32 Lolin32 (with Solder-Bridges).
Use the solder bridges on TOP for Wemos Lolin32 v1.0.0 .
Use the solder bridges on BOT for Lolin32.
- Pictures: I think we have now a picture for all actual Computer & Console Cores.
- Removed Stuff related to ESP32 Devkitc v4 (doesn't work correctly).
Got my first Cardware Donation from Bracknell/UK
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
Does that mean the Devkitc v4 is no longer supported?
- venice
- Top Contributor
- Posts: 741
- Joined: Tue Jun 16, 2020 9:29 am
- Location: Germany
- Has thanked: 264 times
- Been thanked: 262 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
I had problems to get an Devkitc V4 from AZDelivery working.
Serial was working alone, Display was working alone
but together i can‘t get it working.
Do you have a working one?
If yes, drop some pictures here if possible and let me know which Pins you use for the Display and which board you chose in the Arduino IDE.
- RealLarry
- Top Contributor
- Posts: 778
- Joined: Mon May 25, 2020 4:04 am
- Location: San Junipero/DE/Earth
- Has thanked: 93 times
- Been thanked: 336 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
As Venice already stated, it doesn't work at the moment. I initiated the combo of a Devkitc v4 (AZDelivery) and display and it has worked. After designing and receiving a suitable PCB it turns out that the Devkitc doesn't want to play anymore. Venice bought another one for himself, tested and totally rewired the device, but nothing. Not comprehensible so far.
You can use a Wemos Lolin32 instead. Wiring diagram is on it's way:
https://github.com/venice1200/MiSTer_tt ... _board.png
-
- Posts: 48
- Joined: Wed Aug 26, 2020 2:20 pm
- Location: Finland / Tampere
- Has thanked: 14 times
- Been thanked: 19 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
Here are 7 Arcade .xbm images.
(Arcade: F-1 Dream, Final Fight, War of the Bugs, Warriors of Fate, Willow, Wonder Boy, Woodpecker).
(Arcade: F-1 Dream, Final Fight, War of the Bugs, Warriors of Fate, Willow, Wonder Boy, Woodpecker).
You do not have the required permissions to view the files attached to this post.
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
I just wanted to say thank you for a really amazing project. I got all my parts in the post this morning, soldered it up and got it running in less than an hour. Really impressive stuff. I particularly like the transitions between graphics, it adds a little bit of shine to it.
You do not have the required permissions to view the files attached to this post.
- RealLarry
- Top Contributor
- Posts: 778
- Joined: Mon May 25, 2020 4:04 am
- Location: San Junipero/DE/Earth
- Has thanked: 93 times
- Been thanked: 336 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
Congrats, nice setup! May I ask what ESP you're using?WiteWulf wrote: ↑Fri May 28, 2021 12:53 pm I just wanted to say thank you for a really amazing project. I got all my parts in the post this morning, soldered it up and got it running in less than an hour. Really impressive stuff. I particularly like the transitions between graphics, it adds a little bit of shine to it.
- venice
- Top Contributor
- Posts: 741
- Joined: Tue Jun 16, 2020 9:29 am
- Location: Germany
- Has thanked: 264 times
- Been thanked: 262 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
Great, another quick build
Can use the picture for the gallery?
I bet for an TTGO
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
As I posted upthread I was trying to build a solution without requiring soldering. That failed because of the screens I purchased originally, which are not 4SPI out of the box. I found where I can order the screens pre-configured for 4SPI thankfully. Now I'm waiting on them to arrive from China.RealLarry wrote: ↑Fri May 28, 2021 5:04 am As Venice already stated, it doesn't work at the moment. I initiated the combo of a Devkitc v4 (AZDelivery) and display and it has worked. After designing and receiving a suitable PCB it turns out that the Devkitc doesn't want to play anymore. Venice bought another one for himself, tested and totally rewired the device, but nothing. Not comprehensible so far.
You can use a Wemos Lolin32 instead. Wiring diagram is on it's way:
https://github.com/venice1200/MiSTer_tt ... _board.png
For the Arduino, I have two TTGO boards, which I can use with Dupont wires and a breadboard. The Devkitc is available with pins already on it and has a terminal breakout board available though, which enables more permanent wiring. I just bought two of those and the breakouts.
I'm a little frustrated to see the Devkitc isn't working after all.
- venice
- Top Contributor
- Posts: 741
- Joined: Tue Jun 16, 2020 9:29 am
- Location: Germany
- Has thanked: 264 times
- Been thanked: 262 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
I understand.
We can try your Devkitc Board when your Display arrive.
If it‘s not working we can use your TTGO‘s as well.
Where are you located?
Maybe there is someone around you who can help.
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
Hi Venice,
Here is a couple of pictures for you.
Again, thank you for all your help.
Reg.
Here is a couple of pictures for you.
Again, thank you for all your help.
Reg.
You do not have the required permissions to view the files attached to this post.
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
It's a TTGO ESP32, way over-powered for this job (I'm sure it could be done with an ESP8266, but it's a nice form factor and it was a decent price on Ali).
- venice
- Top Contributor
- Posts: 741
- Joined: Tue Jun 16, 2020 9:29 am
- Location: Germany
- Has thanked: 264 times
- Been thanked: 262 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
Looks great, nice build
I will add a picture to the gallery if it‘s ok for you.
- venice
- Top Contributor
- Posts: 741
- Joined: Tue Jun 16, 2020 9:29 am
- Location: Germany
- Has thanked: 264 times
- Been thanked: 262 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
Nice clock btw, selfmade?
- venice
- Top Contributor
- Posts: 741
- Joined: Tue Jun 16, 2020 9:29 am
- Location: Germany
- Has thanked: 264 times
- Been thanked: 262 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
The Pictures are uploaded to Github and ready for the Updater
Many Thanks.
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
Nah sadly not - it came from here https://lametric.com/en-US but I got it much cheaper on Amazon on a sale.
Was my Xmas present to myself !
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
Thanks and sorry for missing this earlier, of course, feel free to.
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
AliExpress ? Have you got a link to the one you bought please ?Mellified wrote: ↑Fri May 28, 2021 3:47 pm As I posted upthread I was trying to build a solution without requiring soldering. That failed because of the screens I purchased originally, which are not 4SPI out of the box. I found where I can order the screens pre-configured for 4SPI thankfully. Now I'm waiting on them to arrive from China.
I am hoping to place an order today for esp, screen, some other port extensions and a case today, probably all from Ali. I'm in the UK.
Cheers.
- venice
- Top Contributor
- Posts: 741
- Joined: Tue Jun 16, 2020 9:29 am
- Location: Germany
- Has thanked: 264 times
- Been thanked: 262 times
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
I am sorry to slow you down a bit but this ESP Breakout is for the "Devkitc V4" ESP32 which I can't get to work with the tty2oled Arduino Program and my Controller. We must wait until "Mellified" get all his parts and we can start to test or I get new hardware for testing.
Re: tty2oled Software Add-On with USB/SD Support (Show Text/Pictures based on loaded Core on Display)
Here're links to what I ordered. I'm still waiting on the screens so I haven't done anything other than mount the boards onto the terminal breakout.hitm4n wrote: ↑Mon May 31, 2021 10:12 amAliExpress ? Have you got a link to the one you bought please ?Mellified wrote: ↑Fri May 28, 2021 3:47 pm As I posted upthread I was trying to build a solution without requiring soldering. That failed because of the screens I purchased originally, which are not 4SPI out of the box. I found where I can order the screens pre-configured for 4SPI thankfully. Now I'm waiting on them to arrive from China.
I am hoping to place an order today for esp, screen, some other port extensions and a case today, probably all from Ali. I'm in the UK.
Cheers.
viewtopic.php?p=26016#p26016