Page 2 of 2

Re: Considerations for a custom case?? Where to buy??

Posted: Tue Jun 01, 2021 11:01 am
by hitm4n
https://www.ribu.at/microsd-metall-einb ... -mit-kabel
I want this one now, and it changes everything regards layout :)
I do like the design of having all the usbs in line with the power, but don't like the power at the bottom, certainly not on the right.
But if i manage to get the SDcard thing as a 22mm round connector, like the others, i'll have to reconsider again :)

Be interesting as parts start to arrive. I hope you will have another picture for the TTYOLED page eventually...

Re: Considerations for a custom case?? Where to buy??

Posted: Tue Jun 01, 2021 12:18 pm
by hitm4n
DIYMockup5noscrews+logo.png
Toying with more ideas :)

Re: Considerations for a custom case?? Where to buy??

Posted: Tue Jun 01, 2021 12:22 pm
by hitm4n
Last one again for now.
DIYMockup6noscrews+logo.png

Re: Considerations for a custom case?? Where to buy??

Posted: Tue Jun 01, 2021 12:33 pm
by dave18
One thing worth noting with that case is that the metal is relatively thick and will take some cutting through. I would recommend finding some scrap metal to test your hole cutting skills on first. The front, back and bottom are a single piece of metal so you can't replace with a 3d printed panel or PCB, therefore you will need to cut the required holes (that's what made me chicken out even though I love the look of the case).

Re: Considerations for a custom case?? Where to buy??

Posted: Tue Jun 01, 2021 12:43 pm
by hitm4n
DIYMockup7noscrews.png
You know what, your design is pretty much what i just did, with the power and sd switched... Dropped the logo and spaced it out.

Re: Considerations for a custom case?? Where to buy??

Posted: Tue Jun 01, 2021 12:46 pm
by hitm4n
dave18 wrote: Tue Jun 01, 2021 12:33 pm One thing worth noting with that case is that the metal is relatively thick and will take some cutting through. I would recommend finding some scrap metal to test your hole cutting skills on first. The front, back and bottom are a single piece of metal so you can't replace with a 3d printed panel or PCB, therefore you will need to cut the required holes (that's what made me chicken out even though I love the look of the case).
Noted. I have someone who can do accurate metal hole cutting :) Should be okay.
If i can get the SD card thing form the guy in Germany, i think this is going to look very tasty.

Re: Considerations for a custom case?? Where to buy??

Posted: Fri Jun 04, 2021 8:26 am
by hitm4n
DIYMockup12.png
So i've gone through a few more designs while i wait for parts to arrive (which some have come from ebay already).
This is my current favourite design, i think it looks like it could be a real manufactured bit of kit.

Main reason to pop back on and post though is hopefully of interest to others who want to do their own case.

I have sourced/been assisted in finding particular parts. The USB port in particular was hard to find, it may be newly listed as i didn't find it one day then i did find it the next. These are certainly not the cheapest, but i think they will look very nice and i am going to town on this case

https://www.aliexpress.com/item/1005002419772566.html
usbport.png
It is silver, the image is a little blue looking, but the black surround part lights up blue when something is plugged in or active. Neat.

(I originally ordered the ones linked below, and they are still coming, but i decided the screw front mount and the dull silver was not right. I will likely have these for sale if anyone wants them. Cheap. https://www.aliexpress.com/item/4001031049731.html )

I also got a tip off about a nice microsd port. Unfortunately it was out of stock and it seemed i could not order it from Germany to UK. Maybe brexit getting in the way. But i emailed Anton, who runs RIBU Elekronik e.U. and he gave me a way to make it happen. This is now on the way. This part is certainly not cheap, but good luck finding something close to this elsewhere (i failed).

https://www.ribu.at/microsd-metall-einb ... abel-24-cm
sdport.png
The smaller Red Green and Blue momentary switches have arrived. Very happy with those, i think in hindsight i should have gone bigger, but they are okay and i am not getting more of these. 4 for the price of 2 on ebay.
https://www.ebay.co.uk/itm/203207597907 ... 3555629541

So now i'm waiting on everything else to come from AliExpress, then i have to build it :)

Re: Considerations for a custom case?? Where to buy??

Posted: Mon Jun 07, 2021 4:21 pm
by hitm4n
Just had confirmation from an AliExpress email that the case is in the UK. This means its only a day or two away now and i only ordered it last Monday. Thats crazy fast. Hopefully all the other parts are not far behind and everything is in good order :)

Also confirmation from Anton that the MicroSD slot / extender was posted last Wednesday. Thats on a plane currently, so also not far off.

Exciting. (well, for me it is) :)

Re: Considerations for a custom case?? Where to buy??

Posted: Wed Jun 09, 2021 9:18 pm
by hitm4n
Case has arrived. Took just 9 days. From China to UK that is amazing. Anyway, superbly packed, not a mark on it. Really chuffed with it.
Also arrived today, the OLED screen, green version. Lots more bits to arrive, but i intend to keep posting progress (it'll be slow), as parts continue to arrive and i start drilling mounting holes and asking for help on how to wire it all up :)

Re: Considerations for a custom case?? Where to buy??

Posted: Mon Jun 14, 2021 12:28 pm
by BlackSpy
Keen to see your pictures as you build!

Re: Considerations for a custom case?? Where to buy??

Posted: Mon Jun 14, 2021 12:52 pm
by BlackSpy
Looking at some enclosures with a half plan to maybe make my own case I'm wondering how many external usb I really need/ want.

I'm tempted to get a slightly larger enclosure and just all my wireless usb dongles inside the box. Less accessible but neater looking, less work and less cost. Any reason to go for more than one really?

I'm thinking I might just do power, video, 1x usb and maybe network.

Re: Considerations for a custom case?? Where to buy??

Posted: Thu Jun 17, 2021 3:47 pm
by hitm4n
Whatever your needs are, the bonus of doing one yourself is the customisation. I've gone for a little bit of future proofing. The segregated usb3.0 port on the left is in case i want to dabble with SNAC connectors and controllers in future, but if you only use 1 bluetooth controller (as i do currently) would you really need the port on the front? Probably not. If you want to place all your bluetooth, wifi, keyboard mouse dongles etc into the usb board inside the box, will you need ports on the front? Probably not.

I want the easy access to plug/replug the wifi/bluetooth dongles and ultimately i want a wifi keyboard and mouse combo too, so thats 3 usb 2.0 ports needed. The fourth is failover.

You certainly don't need an OLED display, but hey, look how cool they are :)

And again, the MicroSD port is for ease, not having to delve inside. I haven't even neeed to take that card out in months, i can remotely copy files to it with WinSCP, but what if the OS is corrupted and i do need to rebuild it? Then, having it front mounted is just easier.

Besides, i reckon i've got a nice clean layout, so although to some it might seem like port overload, i'm okay with it.

I do plan to keep the posts coming, although progress will now slow down as work is horrendous at the minute and i am aiming to do this properly. This means getting the holes perfectly and expertly cut, which will take time and i do have a bit to learn when it comes to wiring some of it, certainly the OLED panel.

I got signed up to do a write-up on this project too for a magazine, so i do plan to keep a progress record with plenty of pics, and this thread is one place where i can do that.

Certainly more to come. And keep us informed on yours too if you do one. Always good to see other peoples builds (theres the "show us your mister" thread for that, good for inspiration).