Page 2 of 2
Re: MT32pi not turning on or detected by MiSTer
Posted: Tue May 24, 2022 8:26 am
by JWDog
Karmeck wrote: ↑Wed May 18, 2022 6:30 am
How does that pi get power?
Maybe your power supply is not strong enough.
It gets power from a cable I received with the pi. Do you have any recommendations for either pi or mister for suffient power. Because i either power it with pi ,with hat turned off or power with mister through the user port wirh hat turned on.
Re: MT32pi not turning on or detected by MiSTer
Posted: Tue May 24, 2022 9:40 am
by Karmeck
JWDog wrote: ↑Tue May 24, 2022 8:26 am
Karmeck wrote: ↑Wed May 18, 2022 6:30 am
How does that pi get power?
Maybe your power supply is not strong enough.
It gets power from a cable I received with the pi. Do you have any recommendations for either pi or mister for suffient power. Because i either power it with pi ,with hat turned off or power with mister through the user port wirh hat turned on.
I would like an image of your power supply,for your miste, where information about tech power supply is available and and image with everything connected when it is not working, but should.
Re: MT32pi not turning on or detected by MiSTer
Posted: Tue May 24, 2022 3:07 pm
by JWDog
Here is a pic of the power supply. I live in the US. It has a splitter end for power to the usb hub and io board with a bridge power to the de10nano
Re: MT32pi not turning on or detected by MiSTer
Posted: Tue May 24, 2022 3:17 pm
by JWDog
Here is a pic of the power supply for the pi.
Re: MT32pi not turning on or detected by MiSTer
Posted: Tue May 24, 2022 5:55 pm
by Karmeck
JWDog wrote: ↑Tue May 24, 2022 3:07 pm
Here is a pic of the power supply. I live in the US. It has a splitter end for power to the usb hub and io board with a bridge power to the de10nano
How come you use two splinters and I power it all with no splitter.
Not home right now but can show my setup when I get home.
Re: MT32pi not turning on or detected by MiSTer
Posted: Mon May 30, 2022 4:50 pm
by Karmeck
- O7xccMW.jpeg (539.88 KiB) Viewed 970 times
As you can see, I'm only using the top right power socket. That's all that's needed.
Re: MT32pi not turning on or detected by MiSTer
Posted: Mon May 30, 2022 5:28 pm
by FPGA64
Karmeck wrote: ↑Mon May 30, 2022 4:50 pm
As you can see, I'm only using the top right power socket. That's all that's needed.
No its not.
The digital board recommends the way the other guy has it set up with the bridge between the DE10 and the USb board
Re: MT32pi not turning on or detected by MiSTer
Posted: Mon May 30, 2022 7:14 pm
by Karmeck
FPGA64 wrote: ↑Mon May 30, 2022 5:28 pm
Karmeck wrote: ↑Mon May 30, 2022 4:50 pm
As you can see, I'm only using the top right power socket. That's all that's needed.
No its not.
The digital board recommends the way the other guy has it set up with the bridge between the DE10 and the USb board
now i think it was Facebook i learned this, but there are 3 revisions of the usb board, the version I have, only needs power at the top.