Page 1 of 1

How Would I Go About Updating the Linux Portion of MiSTer Manually via FTP?

Posted: Fri May 13, 2022 8:38 pm
by Waifu4Life

Following my topic here: viewtopic.php?p=51244#p51244

I don't use scripts, I manually update my cores via FTP. How do I update the Linux portion of MiSTer via FTP, what do I download?


Re: How Would I Go About Updating the Linux Portion of MiSTer Manually via FTP?

Posted: Fri May 13, 2022 11:31 pm
by throAU
That will depend on what has changed on the Linux side.

That could vary depending on what has been updated for Linux and what The mister project has decided to include from those changes.

It could be literally every file on the system, could be only a couple depending on what needed to be fixed.

Re: How Would I Go About Updating the Linux Portion of MiSTer Manually via FTP?

Posted: Sat May 14, 2022 1:15 am
by FoxbatStargazer
This is funny, I'm not sure anyone knows how to update the linux image without a script... certainly not finding much.

Re: How Would I Go About Updating the Linux Portion of MiSTer Manually via FTP?

Posted: Sat May 14, 2022 1:41 am
by Waifu4Life
FoxbatStargazer wrote: Sat May 14, 2022 1:15 am This is funny, I'm not sure anyone knows how to update the linux image without a script... certainly not finding much.
I think that I should just make a new image and put back my games afterwards.

UPDATE 1: Well Linux was updated using the latest MiSTer SD Card Utility and it didn't fix my analog stick issue.

UPDATE 2: Using another MicroSD card, I did a clean install and then used the update script. I configured my 8BitDo Pro+ and then tried the Input Test, still doesn't work, so I'm out of idea.

Re: How Would I Go About Updating the Linux Portion of MiSTer Manually via FTP?

Posted: Sat May 14, 2022 2:56 pm
by MorkMikael
what update script did you use the update script or update all or downloader.also you my need to run the update script more then once.

Re: How Would I Go About Updating the Linux Portion of MiSTer Manually via FTP?

Posted: Sat May 14, 2022 4:08 pm
by Waifu4Life
MorkMikael wrote: Sat May 14, 2022 2:56 pm what update script did you use the update script or update all or downloader.also you my need to run the update script more then once.
The script that the MiSTer SD Card Utility downloaded:

Code: Select all

#!/bin/bash
# Copyright (c) 2021-2022 José Manuel Barroso Galindo <theypsilon@gmail.com>

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# You can download the latest version of this tool from:
# https://github.com/MiSTer-devel/Downloader_MiSTer

set -euo pipefail

download_file() {
    local DOWNLOAD_PATH="${1}"
    local DOWNLOAD_URL="${2}"
    for (( COUNTER=0; COUNTER<=60; COUNTER+=1 )); do
        if [ ${COUNTER} -ge 1 ] ; then
            sleep 1s
        fi
        set +e
        curl ${CURL_SSL:-} --fail --location -o "${DOWNLOAD_PATH}" "${DOWNLOAD_URL}" &> /dev/null
        local CMD_RET=$?
        set -e

        case ${CMD_RET} in
            0)
                export CURL_SSL="${CURL_SSL:-}"
                return
                ;;
            60)
                if [ -f /etc/ssl/certs/cacert.pem ] ; then
                    export CURL_SSL="--cacert /etc/ssl/certs/cacert.pem"
                    continue
                fi

                set +e
                dialog --keep-window --title "Bad Certificates" --defaultno \
                    --yesno "CA certificates need to be fixed, do you want me to fix them?\n\nNOTE: This operation will delete files at /etc/ssl/certs" \
                    7 65
                local DIALOG_RET=$?
                set -e

                if [[ "${DIALOG_RET}" == "0" ]] ; then
                    local RO_ROOT="false"
                    if mount | grep "on / .*[(,]ro[,$]" -q ; then
                        RO_ROOT="true"
                    fi
                    [ "${RO_ROOT}" == "true" ] && mount / -o remount,rw
                    rm /etc/ssl/certs/* 2> /dev/null || true
                    echo
                    echo "https://curl.se/ca/cacert.pem"
                    curl -kL "https://curl.se/ca/cacert.pem"|awk 'split_after==1{n++;split_after=0} /-----END CERTIFICATE-----/ {split_after=1} {if(length($0) > 0) print > "/etc/ssl/certs/cert" n ".pem"}'
                    echo
                    echo "Installing cacert.pem into /etc/ssl/certs ..."
                    for PEM in /etc/ssl/certs/*.pem; do mv "$PEM" "$(dirname "$PEM")/$(cat "$PEM" | grep -m 1 '^[^#]').pem"; done
                    for PEM in /etc/ssl/certs/*.pem; do for HASH in $(openssl x509 -subject_hash_old -hash -noout -in "$PEM" 2>/dev/null); do ln -s "$(basename "$PEM")" "$(dirname "$PEM")/$HASH.0"; done; done
                    sync
                    [ "${RO_ROOT}" == "true" ] && mount / -o remount,ro
                    echo
                    echo "CA certificates have been successfully fixed."
                    export CURL_SSL=""
                    continue
                fi

                set +e
                dialog --keep-window --title "Insecure Connection" --defaultno \
                    --yesno "Would you like to run this tool using an insecure connection?\n\nNOTE: You should fix the certificates instead." \
                    7 67
                DIALOG_RET=$?
                set -e

                if [[ "${DIALOG_RET}" == "0" ]] ; then
                    echo
                    echo "WARNING! Connection is insecure."
                    export CURL_SSL="--insecure"
                    sleep 5s
                    echo
                    continue
                fi

                echo "No secure connection is possible without fixing the certificates."
                exit 1
                ;;
            *)
                echo "No Internet connection, please try again later."
                exit 1
                ;;
        esac
    done

    echo "Internet connection failed, please try again later."
    exit 1
}

echo "Running MiSTer Downloader"
echo

SCRIPT_PATH="/tmp/downloader.sh"

rm ${SCRIPT_PATH} 2> /dev/null || true

download_file "${SCRIPT_PATH}" "https://raw.githubusercontent.com/MiSTer-devel/Downloader_MiSTer/main/dont_download.sh"

chmod +x "${SCRIPT_PATH}"

export DOWNLOADER_LAUNCHER_PATH="${BASH_SOURCE[0]}"

if ! "${SCRIPT_PATH}" ; then
    echo -e "Downloader failed!\n"
    exit 1
fi

rm ${SCRIPT_PATH} 2> /dev/null || true

exit 0

Re: How Would I Go About Updating the Linux Portion of MiSTer Manually via FTP?

Posted: Sat May 14, 2022 5:20 pm
by MorkMikael
is it the mr-fusion card image if not you try to download and use it.
is you version of mister Mister v220511, OS v220413

Re: How Would I Go About Updating the Linux Portion of MiSTer Manually via FTP?

Posted: Sat May 14, 2022 6:42 pm
by Waifu4Life
MorkMikael wrote: Sat May 14, 2022 5:20 pm is it the mr-fusion card image if not you try to download and use it.
is you version of mister Mister v220511, OS v220413
I formatted the SD card and tried MiSTer-Fusion (which did download v220511), but it didn't work, analog inputs still don't work in MiSTer Input Test.

Re: How Would I Go About Updating the Linux Portion of MiSTer Manually via FTP?

Posted: Sat May 14, 2022 8:00 pm
by MorkMikael
going back to post on viewtopic.php?t=4694
since it now more about the controller