TI-99: Pinball 99

chrisy
Posts: 19
Joined: Wed Oct 20, 2021 3:32 pm
Has thanked: 7 times

TI-99: Pinball 99

Unread post by chrisy »

Here you can find an early version of the game Pinball 99: https://atariage.com/forums/topic/336079-pinball-99/

I tried this on my MiSTer and the ball goes through the solid areas and generally does not behave as it should!

As I know next to nothing about the TI99, it's possible that there are some specific settings required which I have missed. If not, perhaps this is showing up a bug in the core? Under emulation and (according to the thread) real hardware the game works fine.

Can anybody get it to work properly?
Flandango
Core Developer
Posts: 388
Joined: Wed May 26, 2021 9:35 pm
Has thanked: 41 times
Been thanked: 328 times

Re: TI-99: Pinball 99

Unread post by Flandango »

chrisy wrote: Mon May 30, 2022 10:29 pm Here you can find an early version of the game Pinball 99: https://atariage.com/forums/topic/336079-pinball-99/

I tried this on my MiSTer and the ball goes through the solid areas and generally does not behave as it should!

As I know next to nothing about the TI99, it's possible that there are some specific settings required which I have missed. If not, perhaps this is showing up a bug in the core? Under emulation and (according to the thread) real hardware the game works fine.

Can anybody get it to work properly?
First, if you are using pinball99-8.bin, make sure you have loaded it with Load Rom Cart *.BIN and then select Paged378 as the Cart Type.
That seems to work for me.
If you will be using the F18A based core posted in the TI99-4A thread, then make sure you set the maximum # of sprites to 4 in the Video Settings.
chrisy
Posts: 19
Joined: Wed Oct 20, 2021 3:32 pm
Has thanked: 7 times

Re: TI-99: Pinball 99

Unread post by chrisy »

That works, thank you!
Post Reply