Philips Videopac+ G7400

KremlingKuthroat19
Posts: 237
Joined: Sat Aug 22, 2020 3:08 am
Has thanked: 27 times
Been thanked: 49 times

Philips Videopac+ G7400

Unread post by KremlingKuthroat19 »

The Odyssey 2 core has made a lot of strides over the past couple of years. However, it can't play the Videopac+ G7400 games. The G7400 was a revision of the Videopac that was backwards compatible with all Videopac software and offered grahically-superior versions of Videopac games as well as a few exclusive games such as Trans American Rally+ (you can identify the enhanced games because they all end with a + symbol).

After doing a little digging, I discovered an alpha core that's in development by Victor Trucco. Here's a video he posted back in February: https://www.youtube.com/watch?v=Yfa0ZIc_2Xc

Here is his Patreon: https://www.patreon.com/vtrucco
Here is his Github: https://gitlab.com/victor.trucco/Multic ... r/Consoles

Does anyone know Victor? Maybe it'd be worth reaching out to him to see if he'd port this core to MiSTer.
User avatar
NightShadowPT
Posts: 208
Joined: Mon May 25, 2020 9:56 am
Has thanked: 5 times
Been thanked: 9 times

Re: Philips Videopac+ G7400

Unread post by NightShadowPT »

I don't know Victor, but he is the guy behind TTBlue, the FPGA core used on the Spectrum Next.

One can probably find him in the ZX Spectrum Next circles...
teller
Posts: 39
Joined: Thu Jul 23, 2020 9:29 pm
Has thanked: 14 times
Been thanked: 3 times

Re: Philips Videopac+ G7400

Unread post by teller »

I hope this core for the G7400 will soon get released on MiSTer FPGA as well! Especiallly those 2 + games, Helicopter Rescue and Trans-American Rally, were very different from the other Videopac games, because they were 16KB.

bymarcao
Posts: 2
Joined: Mon Mar 27, 2023 11:01 am

Re: Philips Videopac+ G7400

Unread post by bymarcao »

Don't have the VideoPC G7400 core?

bymarcao
Posts: 2
Joined: Mon Mar 27, 2023 11:01 am

Re: Philips Videopac+ G7400

Unread post by bymarcao »

teller
Posts: 39
Joined: Thu Jul 23, 2020 9:29 pm
Has thanked: 14 times
Been thanked: 3 times

Re: Philips Videopac+ G7400

Unread post by teller »

Any news to this core for MiSTer?

User avatar
Chris23235
Top Contributor
Posts: 841
Joined: Sun May 24, 2020 8:45 pm
Has thanked: 106 times
Been thanked: 167 times

Re: Philips Videopac+ G7400

Unread post by Chris23235 »

teller wrote: Thu Feb 01, 2024 8:15 pm

Any news to this core for MiSTer?

Looking at the video above your post it seems there is nothing to do, the current core already supports the Videopac+ G7400 games.

User avatar
kathleen
Top Contributor
Posts: 409
Joined: Fri Jun 26, 2020 4:23 am
Location: Belgium
Has thanked: 224 times
Been thanked: 131 times

Re: Philips Videopac+ G7400

Unread post by kathleen »

Chris23235 wrote: Fri Feb 02, 2024 12:49 pm
teller wrote: Thu Feb 01, 2024 8:15 pm

Any news to this core for MiSTer?

Looking at the video above your post it seems there is nothing to do, the current core already supports the Videopac+ G7400 games.

Seeing the menu, it seems that this is for the Mist and not (yet) for the Mister unfortunately.

かすりん

User avatar
Chris23235
Top Contributor
Posts: 841
Joined: Sun May 24, 2020 8:45 pm
Has thanked: 106 times
Been thanked: 167 times

Re: Philips Videopac+ G7400

Unread post by Chris23235 »

kathleen wrote: Fri Feb 02, 2024 1:51 pm
Chris23235 wrote: Fri Feb 02, 2024 12:49 pm
teller wrote: Thu Feb 01, 2024 8:15 pm

Any news to this core for MiSTer?

Looking at the video above your post it seems there is nothing to do, the current core already supports the Videopac+ G7400 games.

Seeing the menu, it seems that this is for the Mist and not (yet) for the Mister unfortunately.

Ah, my bad. You are right. So familiar with both machines that I didn't realise it.

Post Reply