MiSTer Not Booting Correctly With Guncon 2

Discussion of keyboards, gamepads, joysticks and other input related peripherals.
Kjf1138
Posts: 1
Joined: Sat Jun 18, 2022 2:46 pm

MiSTer Not Booting Correctly With Guncon 2

Unread post by Kjf1138 »

When I plug my Guncon 2 to my Mister, I’m not able to get into the menu. Like when I start the PSX or NES cores, it won’t allow me to get to the menu to setup the input for the Guncon 2. I have tried having my ps4 controller and Guncon 2 plugged and just the Guncon 2 plugged. But when I unplug the T cable from the Guncon 2, but leaving it plugged in the usb, I can get to the menu. What’s going on with it? What power supplies do you guys use with the Guncon 2?
User avatar
DannyVoid
Posts: 2
Joined: Mon May 15, 2023 4:47 pm

Re: MiSTer Not Booting Correctly With Guncon 2

Unread post by DannyVoid »

First post here in the forum, sorry if I'm replying a 1 year old question.

I had the same issue yesterday, and that's why I came to the forum, seems that its the calibration file messing with the Core.
What I did was to manually delete the calibration file in the config forlder.

I did a couple of tests, and I found that if you calibrate the Guncon 2 out of boundries of your CRT it will give this issue on the PSX core.

I haven't tried this bug on other cores.

Just to let everyone knows ;)

Post Reply