MiSTer No Display Signal

Discussion about displays and related hardware including MiSTer filters and video settings.
User avatar
Choirboy
Posts: 2
Joined: Tue Dec 13, 2022 4:56 am

MiSTer No Display Signal

Unread post by Choirboy »

So I haven't used my mister in a few months. Last time I used it was on a trip I took by plane. I wanted to update everything but powering on I get no signal. The lights from my Digital IO board aren't lighting up either. Tried directly powering from DE-10, tried different cables and monitors but nothing is working. My .ini settings are the default ones.

Build:
DE10-Nano
Digital IO
128mb ram
RTC
USB Hub
powered by Triad WSX050-4000

AngelicLiver
Posts: 317
Joined: Fri May 29, 2020 8:50 am
Has thanked: 66 times
Been thanked: 87 times

Re: MiSTer No Display Signal

Unread post by AngelicLiver »

  1. Is the micro SD card in the correct card slot? (The one on the DE10-Nano itself.)

  2. Are the 4 DIP switches set correctly? (For digital IO they should be set to Off, Off, Off, On. Check here.

  3. Have you tried a fresh install on a different micro SD card?

Marcellus
Posts: 28
Joined: Wed Jun 29, 2022 5:50 pm
Has thanked: 10 times
Been thanked: 2 times

Re: MiSTer No Display Signal

Unread post by Marcellus »

Looks like dead or broken SD card.

User avatar
Choirboy
Posts: 2
Joined: Tue Dec 13, 2022 4:56 am

Re: MiSTer No Display Signal

Unread post by Choirboy »

Marcellus wrote: Wed Dec 14, 2022 1:46 am

Looks like dead or broken SD card.

yeah, that's what it turned out to be. went to the store and bought another one. works fine now

Post Reply